I am trying to install fluid gaurd rings and I am getting the following error. Any help on this??
*WARNING* (TECH-280310): Can not display install guard ring form because no valid technology library was found.
Also, I have created a MPP. I wanted to add rodStrech handle operation to it so that I can strech it in vertical direction to get via's in rows (Usually MPP's has strech operation only in X -direction. Trying to add strech operation in Y axis). I have looked into couple of posts and could not figure out the best suit for my requirement. Can any1 please add y axis strecth operation to my piece of code.
prog((tech techLibName techFileName) techLibName = "cmos045" techFileName = "tech.db" tech = techOpenTechFile(techLibName techFileName "r") if(tech==nil then return(nil) ) ;The template name is : M2X_M3X
leDefineMPPTemplate( ?techId tech ?name "M2X_M3X" ?layer list("M2X" "drawing") ?width 0.130000 ?choppable nil ?endType "truncate" ?beginExt 0.000000 ?endExt 0.000000 ?justification "center" ?offset 0.000000 ?encSubPath list( list( ?layer list("M3X" "drawing") ?enclosure 0.000000 ?choppable nil ?beginOffset 0.000000 ?endOffset 0.000000 ) ) ?subRect list( list( ?layer list("VIA2X" "drawing") ?width 0.070000 ?length 0.070000 ?choppable t ?sep 0.000000 ?justification "center" ?space 0.090000 ?beginOffset -0.030000 ?endOffset -0.030000 ?beginSegOffset 0.000000 ?endSegOffset 0.000000 ?gap "distribute" ) ) ) ; end of leDefineMPPTemplate procedure) ; end of prog in ASCII file
Do you have any libraries in your Library Manager that are technology libraries and are writable? If you search Sourcelink for "TECH-280310", you'll find a solution that indicates you need a writable technology library.
As for your MPPs, remember that they are paths. You can only stretch paths in the direction of the path, so you cannot stretch its width. If this is a guard ring, then hopefully the fluid guard ring will give you what you need since it is not constrained to a path.