Stats

  • Locked Locked
  • Replies 5
  • Subscribers 143
  • Views 2975
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

In OCEAN command line mode, backspace, delete, and others don't work properly.

rickyuexu

Hi,

When I'm in OCEAN command line mode, when I hit backspace, it shows "^H" on the command line.

"^[[3~" is for delete.

"^[[D" is for left arrow.

And so on.

Is there a solution to this?

I'm using IC 6.1.4.500, and using NX for Windows to work on a remote server.

I searched the forum, and find no others experiencing the same problem. 

 Thanks! 

Parents

  • Hi Andrew,

    it shows:

    speed 38400 baud; rows 49; columns 113; line = 0;

    intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q;

    stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^0; min = 1; time = 0;

    -parenb - parodd cs8 -hupcl -cstopb cread -clocal -crtscts -cdtrdsr

    -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel -iutf8

    opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0

    isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke 

Reply

  • Hi Andrew,

    it shows:

    speed 38400 baud; rows 49; columns 113; line = 0;

    intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q;

    stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^0; min = 1; time = 0;

    -parenb - parodd cs8 -hupcl -cstopb cread -clocal -crtscts -cdtrdsr

    -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel -iutf8

    opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0

    isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke 

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.