Stats

  • Locked Locked
  • Replies 1
  • Subscribers 143
  • Views 12962
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with create Auto Via option.

2221

Hi All,

I am using Cadence tool IC6.1.5 version . In the technology library there are different types of vias like (M2_M1a, M2_M1_FBD,M2_M1_PBD, etc,.) .  If I use auto contact between M2 and M1 with option under Via Definition as "M2_M1_FBD" or "M2_M1_PBD". It will place the via with via Definition as "M2_M1_FBD" or "M2_M1_PBD" , but has the parameters as Minimum Rules which is for "M2_M1a" .

I want the selected vias with corresponding Viasdefs not the minimum rule parameters.

Please tell me how to overcome this issue.

Thanks ,

srinivas

  • Andrew Beckett

    Please contact customer support. We'd really need to see your technology data (the tech file at least) to properly understand your issue. 

     Regards,

    Andrew 

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.