Stats

  • Locked Locked
  • Replies 0
  • Subscribers 143
  • Views 12762
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Extract waveforms for curve families from a parametric analysis

VahidK

Hi all

I have a circuit that the simulation result is a pair of current and voltage curves, which then I use the "Axis --> Y vs Y" option and plot them as an IV curve. But when I run a parametric analysis and perform a sweep on e.g. frequency (say for 10 steps), I get 20 curves. The tricky part is here when I want to pair the current and voltage curves for each frequency step and plot the IV characteristics, so that I get 10 IV curves. In the menu of "Y vs Y", I only can choose a trace for a single frequency... and all other curves are paired with that frequency. The result is one correct IV curve and a bunch of scrambled waveforms.

Someone told me that I can write an ocean code, extract the waveforms for the curve families and plot them accordingly. Any help on how to do that?

Any help is appreciated. Thank you!

VahidK

 

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.