Stats

  • Locked Locked
  • Replies 1
  • Subscribers 144
  • Views 14824
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bindkey to Annotate DC Operating Point

Clidre

I've searched but I haven't found it.

Do you know if there's a bindkey to annotate the DC Operating Point on the schematic? I'm working with Cadence Virtuoso 6.1.5.

Thanks!

Parents
  • TaherKotb

    Hello Clidre,

    You can set your own bindkey configuration through hiSetBindKey() procedure

    Post dc netlist and run, you can write the following command:

    sevAnnotateResults( sevSession( hiGetCurrentWindow() 'dcOpPoints )

    sevAnnotateResults( sevSession( hiGetCurrentWindow() 'dcNodeVoltages ) 

    To bind a key to the annotate function, you can choose the shift+c combination as follows:

    hiSetBindKey( "Schematics" "Shift<Key>c"  "sevAnnotateResults( sevSession( hiGetCurrentWindow() 'dcOpPoints ) " ) 

     

    Best Regards

    Taher 

Reply
  • TaherKotb

    Hello Clidre,

    You can set your own bindkey configuration through hiSetBindKey() procedure

    Post dc netlist and run, you can write the following command:

    sevAnnotateResults( sevSession( hiGetCurrentWindow() 'dcOpPoints )

    sevAnnotateResults( sevSession( hiGetCurrentWindow() 'dcNodeVoltages ) 

    To bind a key to the annotate function, you can choose the shift+c combination as follows:

    hiSetBindKey( "Schematics" "Shift<Key>c"  "sevAnnotateResults( sevSession( hiGetCurrentWindow() 'dcOpPoints ) " ) 

     

    Best Regards

    Taher 

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.