• Skip to main content
  • Skip to search
  • Skip to footer
Cadence Home
  • This search text may be transcribed, used, stored, or accessed by our third-party service providers per our Cookie Policy and Privacy Policy.

  1. Community Forums
  2. Custom IC SKILL
  3. Cadence IC5.1.41 libInit.il

Stats

  • Locked Locked
  • Replies 19
  • Subscribers 144
  • Views 22860
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cadence IC5.1.41 libInit.il

ag2888
ag2888 over 11 years ago
Hi,

I wanted to know is it possible to overwrite the libInit.il file, which is specified in the project area by a local version of the same??
I am actually trying to load a user defined set of "modelPath"s for the analog design environment. So i have another skill script in my local area to do that (this is loaded using .cdsinit). But the libInit.il file in the project area, that is sourced whenever i open the library manager, overwrites the "modelPath"s by loading a script in the project area.

Any suggestions how this can be done?

Any other suggestions on how to add some default set of "modelPath"s for the ADE?

Thanks
  • Cancel
Parents
  • ag2888
    ag2888 over 11 years ago

    HI Andrew,

     I edited the .cdsinit as you suggested. So i do the following in there now and it works:

    ddGetObj("yourTechLibName") 

    load("myLocalModel.il") 

    I did not load my loca libInit file as i was doing it to just change the customExit version of same and my basic aim was to load some user defined set of model files for ADE at statup. This way now it works. Thanks a lot!

    Also i have one more doubt wrt to the display of the schematic in schematic composer. The colours for the various components seem to be different from what is seen normally. For e.g : yellow colour for the wires, Instance names for the ports in pink etc.

    I tried editing and loading the changed display.drf from my local path but the colours dont change still. Any suggestion for this?

     

     

     

    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Reply
  • ag2888
    ag2888 over 11 years ago

    HI Andrew,

     I edited the .cdsinit as you suggested. So i do the following in there now and it works:

    ddGetObj("yourTechLibName") 

    load("myLocalModel.il") 

    I did not load my loca libInit file as i was doing it to just change the customExit version of same and my basic aim was to load some user defined set of model files for ADE at statup. This way now it works. Thanks a lot!

    Also i have one more doubt wrt to the display of the schematic in schematic composer. The colours for the various components seem to be different from what is seen normally. For e.g : yellow colour for the wires, Instance names for the ports in pink etc.

    I tried editing and loading the changed display.drf from my local path but the colours dont change still. Any suggestion for this?

     

     

     

    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.

© 2025 Cadence Design Systems, Inc. All Rights Reserved.

  • Terms of Use
  • Privacy
  • Cookie Policy
  • US Trademarks
  • Do Not Sell or Share My Personal Information