Stats

  • Locked Locked
  • Replies 2
  • Subscribers 143
  • Views 13460
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

wrongly placed Cadence library

marklin

I made a mistake to place the linux path of Cadence library.  The correct linux path for library_A should be dir_top/dir_mid/library_A.   However, the wrongly  placed linux path for library_A  is dir_top/library_A     Inside dir_top/library_A, I have cell_A, cell_B, user_1, user_2, cdsinfo.tag, prop.xx    (user_1 and user_2 are NOT part of library_A; they just exist inside dir_top/library_A).   If I use design manager to delete library_A, I am afraid it may also delete user_1 and user_2 directories since the library path name of library_A is dir_top/library_A.     My question is  "Can I just use linux commands to delete library_A by deleting just cell_A, cell_B, cdsinfo.tag and prop.xx?"

Parents

  • Yes, that should work. You'd also need to remove the cds.lib entry too. If you were to delete in the library manager, it would take out the entire directory, which you don't want!

    You mentioned "design manager" - not sure if you meant "library manager", or whether you are using a design management solution such as DesignSync DFII, IC Manage, ClioSoft SOS, MethodICs EDA VersIC, or IBM ClearCase - in that case, it would be a bit more complicated because you will have references to it in the vault - you'd have to go through whatever mechanism is needed with those DM tools to delete data from the vault.

    Regards,

    Andrew.

Reply

  • Yes, that should work. You'd also need to remove the cds.lib entry too. If you were to delete in the library manager, it would take out the entire directory, which you don't want!

    You mentioned "design manager" - not sure if you meant "library manager", or whether you are using a design management solution such as DesignSync DFII, IC Manage, ClioSoft SOS, MethodICs EDA VersIC, or IBM ClearCase - in that case, it would be a bit more complicated because you will have references to it in the vault - you'd have to go through whatever mechanism is needed with those DM tools to delete data from the vault.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.