Stats

  • Locked Locked
  • Replies 4
  • Subscribers 142
  • Views 3431
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

OCEAN/SKILL scripting

archive

Hi!
I want to automatize some simulations.
Let us say i have a circuit A.
Circuit A has a schematic view consisting of transistors and passive elements.
Circuit A has a Verilog-A view.

Do you know if it is possible to specify the  view (schematic or Verilog-A) i want to simulate
in OCEAN/SKILL without changing the netlist manually. Something like this in OCEAN/SKILL would be
cool, isn't it?

1) Circuit A in schematic
2) run
3) output Vout (lets us say a voltage on net called 'out') to a file.
4) Circuit A in Verilog-A
5) run
6) output Vout
7) calculate voltage difference between 3 and 6
8) plot the results

I tried to this for quite sometime but could not figure out how to do it. The roadblock
is that OCEAN gets the netlist from a location (the views are mentioned in the netlist)
and i don't want to get into netlist modification.

I know this can be done with config view but i am just thinking of a better way of doing it.

cheers
Vara


Originally posted in cdnusers.org by vara
Parents

  • Hi Gilbert,
    Thanks for the message. It was useful but i could not manage to shift views successfully.
    Instead, this information was very useful in what i wanted to do.

    http://sourcelink.cadence.com/en/search/DisplayHtmlDoc.jhtml;jsessionidsl=U4MLH54H1GWETLA0BEBCFEQ?param1=http://sourcelink.cadence.com/docs/db/kdb/2007/May/11336018.html?param2=null?param3=Solutions?param4=11336018?param5=/software/cadence/sldocs/db/kdb/2007/May/11336018.html@en_col?param7=How%20to%20change%20binding%20in%20%3Cb%3Econfig%3C/b%3E%20%3Cb%3Eview%3C/b%3E%20using%20%3Cb%3ESkill%3C/b%3E%20commands?

    Vara


    Originally posted in cdnusers.org by vara
Reply

  • Hi Gilbert,
    Thanks for the message. It was useful but i could not manage to shift views successfully.
    Instead, this information was very useful in what i wanted to do.

    http://sourcelink.cadence.com/en/search/DisplayHtmlDoc.jhtml;jsessionidsl=U4MLH54H1GWETLA0BEBCFEQ?param1=http://sourcelink.cadence.com/docs/db/kdb/2007/May/11336018.html?param2=null?param3=Solutions?param4=11336018?param5=/software/cadence/sldocs/db/kdb/2007/May/11336018.html@en_col?param7=How%20to%20change%20binding%20in%20%3Cb%3Econfig%3C/b%3E%20%3Cb%3Eview%3C/b%3E%20using%20%3Cb%3ESkill%3C/b%3E%20commands?

    Vara


    Originally posted in cdnusers.org by vara
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.