Stats

Locked Locked
Replies 3
Subscribers 143
Views 10572
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cannot assign params in postlayout netlist

Hi everybody,

I have an esd cell, it is a pcell with layout . In this pcell, there are 3 other pcells( 2 kinds of fet and 1 resistor cell where only 1 pcell has layout view - just describe detail about it) and it contains callback function (pPar)

My prelayout simulation is done really well

when i do extractition with calibre and run post-layout sim, there are some errors coming out in spectre.log. It seems that it cannot call parameters from layout hierarchically

i tried to modify cellmap file but it may not the workaround for it

the below is netlist pre/postlayout and logfile, could you give me a hand for this bug? - very appreciate your help

Binh Ngo

1. post-layout netlist that contains the error devices ( i cannnot paste all here, because it is too prolix )

// Generated for: spectre
// Generated on: Jan 8 13:02:42 2022
// Design library name: 04_Ported_Circulator
// Design cell name: 02_esd_tb
// Design view name: config
simulator lang=spectre
global 0
parameters vdcin=1 vddio=1.8
include "/home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/LNR28LPP_Spectre.lib" section=nn

// Library name: 04_Ported_Circulator
// Cell name: 02_esd_IO_rf
// View name: calibre
// Inherited view list: spectre cmos_sch cmos.sch schematic veriloga ahdl
//pspice dspf
subckt _sub83 PAD VDDIO VSS
parameters _par0 _par3 _par4
N2_5__RR0 (N2_5__RR0_pos N2_5__net13 N2_5__RR0_sub) sblkndres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_5__RR1 (N2_5__RR1_pos N2_5__net14 N2_5__RR1_sub) sblkndres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_3__RR1 (N2_3__RR1_pos N2_3__net14 N2_3__RR1_sub) sblkndres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_3__RR0 (N2_3__RR0_pos N2_3__net13 N2_3__RR0_sub) sblkndres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_6__RR0 (N2_6__RR0_pos N2_6__net13 N2_6__RR0_sub) sblkndres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_6__RR1 (N2_6__RR1_pos N2_6__net14 N2_6__RR1_sub) sblkndres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_7__RR1 (N2_7__RR1_pos N2_7__net14 N2_7__RR1_sub) sblkndres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_7__RR0 (N2_7__RR0_pos N2_7__net13 N2_7__RR0_sub) sblkndres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_0__RR0 (N2_0__RR0_pos N2_0__net13 N2_0__RR0_sub) sblkndres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_0__RR1 (N2_0__RR1_pos N2_0__net14 N2_0__RR1_sub) sblkndres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_2__RR1 (N2_2__RR1_pos N2_2__net14 N2_2__RR1_sub) sblkndres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_2__RR0 (N2_2__RR0_pos N2_2__net13 N2_2__RR0_sub) sblkndres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_1__RR0 (N2_1__RR0_pos N2_1__net13 N2_1__RR0_sub) sblkndres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_1__RR1 (N2_1__RR1_pos N2_1__net14 N2_1__RR1_sub) sblkndres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_4__RR1 (N2_4__RR1_pos N2_4__net14 N2_4__RR1_sub) sblkndres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_4__RR0 (N2_4__RR0_pos N2_4__net13 N2_4__RR0_sub) sblkndres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_5__RR0 (P4_5__RR0_pos P4_5__net13 P4_5__RR0_sub) sblkpdres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_5__RR1 (P4_5__RR1_pos P4_5__net14 P4_5__RR1_sub) sblkpdres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_3__RR1 (P4_3__RR1_pos P4_3__net14 P4_3__RR1_sub) sblkpdres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_3__RR0 (P4_3__RR0_pos P4_3__net13 P4_3__RR0_sub) sblkpdres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_6__RR0 (P4_6__RR0_pos P4_6__net13 P4_6__RR0_sub) sblkpdres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_6__RR1 (P4_6__RR1_pos P4_6__net14 P4_6__RR1_sub) sblkpdres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_7__RR1 (P4_7__RR1_pos P4_7__net14 P4_7__RR1_sub) sblkpdres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_7__RR0 (P4_7__RR0_pos P4_7__net13 P4_7__RR0_sub) sblkpdres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_0__RR0 (P4_0__RR0_pos P4_0__net13 P4_0__RR0_sub) sblkpdres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_0__RR1 (P4_0__RR1_pos P4_0__net14 P4_0__RR1_sub) sblkpdres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_2__RR1 (P4_2__RR1_pos P4_2__net14 P4_2__RR1_sub) sblkpdres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_2__RR0 (P4_2__RR0_pos P4_2__net13 P4_2__RR0_sub) sblkpdres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_1__RR0 (P4_1__RR0_pos P4_1__net13 P4_1__RR0_sub) sblkpdres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_1__RR1 (P4_1__RR1_pos P4_1__net14 P4_1__RR1_sub) sblkpdres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_4__RR1 (P4_4__RR1_pos P4_4__net14 P4_4__RR1_sub) sblkpdres w=4e-05 \
l=2e-07 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
P4_4__RR0 (P4_4__RR0_pos P4_4__net13 P4_4__RR0_sub) sblkpdres w=4e-05 \
l=2e-06 s=1 pbar=1 dtemp=_par0 sh=1 sizedup=0
N2_5__I0 (N2_5__net13 N2_5__I0_g N2_5__net14 N2_5__I0_b N2_5__net15) \
esdnsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
N2_3__I0 (N2_3__net13 N2_3__I0_g N2_3__net14 N2_3__I0_b N2_3__net15) \
esdnsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
N2_6__I0 (N2_6__net13 N2_6__I0_g N2_6__net14 N2_6__I0_b N2_6__net15) \
esdnsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
N2_7__I0 (N2_7__net13 N2_7__I0_g N2_7__net14 N2_7__I0_b N2_7__net15) \
esdnsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
N2_0__I0 (N2_0__net13 N2_0__I0_g N2_0__net14 N2_0__I0_b N2_0__net15) \
esdnsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
N2_2__I0 (N2_2__net13 N2_2__I0_g N2_2__net14 N2_2__I0_b N2_2__net15) \
esdnsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
N2_1__I0 (N2_1__net13 N2_1__I0_g N2_1__net14 N2_1__I0_b N2_1__net15) \
esdnsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
N2_4__I0 (N2_4__net13 N2_4__I0_g N2_4__net14 N2_4__I0_b N2_4__net15) \
esdnsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
P4_5__I0 (P4_5__net13 P4_5__I0_g P4_5__net14 P4_5__I0_b P4_5__net15) \
esdpsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
P4_3__I0 (P4_3__net13 P4_3__I0_g P4_3__net14 P4_3__I0_b P4_3__net15) \
esdpsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
P4_6__I0 (P4_6__net13 P4_6__I0_g P4_6__net14 P4_6__I0_b P4_6__net15) \
esdpsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
P4_7__I0 (P4_7__net13 P4_7__I0_g P4_7__net14 P4_7__I0_b P4_7__net15) \
esdpsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
P4_0__I0 (P4_0__net13 P4_0__I0_g P4_0__net14 P4_0__I0_b P4_0__net15) \
esdpsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
P4_2__I0 (P4_2__net13 P4_2__I0_g P4_2__net14 P4_2__I0_b P4_2__net15) \
esdpsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
P4_1__I0 (P4_1__net13 P4_1__I0_g P4_1__net14 P4_1__I0_b P4_1__net15) \
esdpsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
P4_4__I0 (P4_4__net13 P4_4__I0_g P4_4__net14 P4_4__I0_b P4_4__net15) \
esdpsh wesd=_par3 lesd=_par4 nf=1 ldop=2e-06 lsop=2e-07 esdoxide=2 \
gns=1 sizedup=0
D48_noxref (D48_noxref_pos D48_noxref_neg) diodenx area=9.96307e-11 \
perim=0.000276752 sizedup=0
D49_noxref (D49_noxref_pos D49_noxref_neg) diodepnw area=9.96307e-11 \
perim=0.000276752 sizedup=0
D51_noxref (D51_noxref_pos D51_noxref_neg) diodenwx area=3.36856e-10 \
perim=0.000318992 sizedup=0
D50_noxref (D50_noxref_pos D50_noxref_neg) diodenwx area=1.30846e-09 \
perim=0.000147944 sizedup=0
P3 (P3_pad P3_sub) pad_rf l=8.5e-05 w=7e-05 bp=8 pkg=2
N2_5__MM0 (N2_5__net13 N2_5__RR1_pos N2_5__net14 N2_5__MM0_b) egnfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0 scb=0 scc=0 par=1 dtemp=_par0 pre_layout_local=0 \
u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 plorient=1 pccrit=0 \
p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 wrxcnr=3.6e-05 sizedup=0
N2_3__MM0 (N2_3__net13 N2_3__net15 N2_3__net14 N2_3__MM0_b) egnfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0 scb=0 scc=0 par=1 dtemp=_par0 pre_layout_local=0 \
u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 plorient=1 pccrit=0 \
p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 wrxcnr=3.6e-05 sizedup=0
N2_6__MM0 (N2_6__net13 N2_6__RR1_pos N2_6__net14 N2_6__MM0_b) egnfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0 scb=0 scc=0 par=1 dtemp=_par0 pre_layout_local=0 \
u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 plorient=1 pccrit=0 \
p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 wrxcnr=3.6e-05 sizedup=0
N2_7__MM0 (N2_7__net13 N2_7__net15 N2_7__net14 N2_7__MM0_b) egnfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0 scb=0 scc=0 par=1 dtemp=_par0 pre_layout_local=0 \
u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 plorient=1 pccrit=0 \
p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 wrxcnr=3.6e-05 sizedup=0
N2_0__MM0 (N2_0__net13 N2_0__RR1_pos N2_0__net14 N2_0__MM0_b) egnfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0 scb=0 scc=0 par=1 dtemp=_par0 pre_layout_local=0 \
u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 plorient=1 pccrit=0 \
p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 wrxcnr=3.6e-05 sizedup=0
N2_2__MM0 (N2_2__net13 N2_2__net15 N2_2__net14 N2_2__MM0_b) egnfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0 scb=0 scc=0 par=1 dtemp=_par0 pre_layout_local=0 \
u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 plorient=1 pccrit=0 \
p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 wrxcnr=3.6e-05 sizedup=0
N2_1__MM0 (N2_1__net13 N2_1__RR1_pos N2_1__net14 N2_1__MM0_b) egnfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0 scb=0 scc=0 par=1 dtemp=_par0 pre_layout_local=0 \
u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 plorient=1 pccrit=0 \
p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 wrxcnr=3.6e-05 sizedup=0
N2_4__MM0 (N2_4__net13 N2_4__net15 N2_4__net14 N2_4__MM0_b) egnfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0 scb=0 scc=0 par=1 dtemp=_par0 pre_layout_local=0 \
u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 plorient=1 pccrit=0 \
p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 wrxcnr=3.6e-05 sizedup=0
P4_5__MM0 (P4_5__net13 P4_5__RR1_pos P4_5__net14 P4_5__MM0_b) egpfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0.1256 scb=1.07541e-06 scc=4.23427e-11 par=1 dtemp=_par0 \
pre_layout_local=0 u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 \
plorient=1 pccrit=0 p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 \
wrxcnr=3.6e-05 sizedup=0
P4_3__MM0 (P4_3__net13 P4_3__net15 P4_3__net14 P4_3__MM0_b) egpfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0.1256 scb=1.07541e-06 scc=4.23427e-11 par=1 dtemp=_par0 \
pre_layout_local=0 u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 \
plorient=1 pccrit=0 p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 \
wrxcnr=3.6e-05 sizedup=0
P4_6__MM0 (P4_6__net13 P4_6__RR1_pos P4_6__net14 P4_6__MM0_b) egpfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0.1256 scb=1.07541e-06 scc=4.23427e-11 par=1 dtemp=_par0 \
pre_layout_local=0 u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 \
plorient=1 pccrit=0 p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 \
wrxcnr=3.6e-05 sizedup=0
P4_7__MM0 (P4_7__net13 P4_7__net15 P4_7__net14 P4_7__MM0_b) egpfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0.1256 scb=1.07541e-06 scc=4.23427e-11 par=1 dtemp=_par0 \
pre_layout_local=0 u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 \
plorient=1 pccrit=0 p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 \
wrxcnr=3.6e-05 sizedup=0
P4_0__MM0 (P4_0__net13 P4_0__RR1_pos P4_0__net14 P4_0__MM0_b) egpfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0.1256 scb=1.07541e-06 scc=4.23427e-11 par=1 dtemp=_par0 \
pre_layout_local=0 u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 \
plorient=1 pccrit=0 p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 \
wrxcnr=3.6e-05 sizedup=0
P4_2__MM0 (P4_2__net13 P4_2__net15 P4_2__net14 P4_2__MM0_b) egpfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0.1256 scb=1.07541e-06 scc=4.23427e-11 par=1 dtemp=_par0 \
pre_layout_local=0 u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 \
plorient=1 pccrit=0 p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 \
wrxcnr=3.6e-05 sizedup=0
P4_1__MM0 (P4_1__net13 P4_1__RR1_pos P4_1__net14 P4_1__MM0_b) egpfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0.1256 scb=1.07541e-06 scc=4.23427e-11 par=1 dtemp=_par0 \
pre_layout_local=0 u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 \
plorient=1 pccrit=0 p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 \
wrxcnr=3.6e-05 sizedup=0
P4_4__MM0 (P4_4__net13 P4_4__net15 P4_4__net14 P4_4__MM0_b) egpfet \
w=40u l=0.5u nf=1 ps=0 pd=0 as=0 ad=0 sa=2.0017e-06 sb=2.0017e-06 \
sd=0 sca=0.1256 scb=1.07541e-06 scc=4.23427e-11 par=1 dtemp=_par0 \
pre_layout_local=0 u0_mult=1 stress_vt=0 swtwell=0 ptwell=0 \
plorient=1 pccrit=0 p_la=0 ngcon=2 lpccnr=4.53e-07 covpccnr=0 \
wrxcnr=3.6e-05 sizedup=0

ends _sub83
// End of subcircuit definition.

// Library name: 04_esd
// Cell name: 02_esd_tb
// View name: schematic
// Inherited view list: spectre cmos_sch cmos.sch schematic veriloga ahdl
// pspice dspf
V1 (net3 0) vsource dc=vdcin type=dc
V0 (net2 0) vsource dc=vddio type=dc
C0 (net4 0) capacitor c=1p
I0 (net3 net2 0) _sub83
simulatorOptions options reltol=1e-5 vabstol=1e-8 iabstol=1e-13 temp=27 \
tnom=25 scalem=1.0 scale=1.0 gmin=1e-12 rforce=1 maxnotes=5 maxwarns=5 \
digits=5 cols=80 pivrel=1e-3 sensfile="../psf/sens.output" \
checklimitdest=psf colonasdelimiter=none
dcOp dc write="spectre.dc" maxiters=150 maxsteps=10000 annotate=status
dcOpInfo info what=oppoint where=rawfile
modelParameter info what=models where=rawfile
element info what=inst where=rawfile
outputParameter info what=output where=rawfile
designParamVals info what=parameters where=rawfile
primitives info what=primitives where=rawfile
subckts info what=subckts where=rawfile
saveOptions options save=allpub

2. log file

Cadence (R) Virtuoso (R) Spectre (R) Circuit Simulator
Version 14.1.0.848.isr14 64bit -- 6 Oct 2015
Copyright (C) 1989-2015 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Virtuoso and Spectre are registered trademarks of Cadence Design Systems, Inc. All others are the property of their respective holders.

Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA Security, Inc.

User: mpw8002 Host: mpw-80 HostID: 6BD350DD PID: 266633
Memory available: 89.5487 GB physical: 270.5078 GB
CPU Type: Intel(R) Xeon(R) Silver 4210R CPU @ 2.40GHz
Processor PhysicalID CoreID Frequency Load
0 0 0 2394.4 2.3
1 0 1 2394.4 2.5
2 0 2 2394.4 1.9
3 0 3 2394.4 1.6
4 0 4 2394.4 1.4
5 0 8 2394.4 1.1
6 0 9 2394.4 0.9
7 0 10 2394.4 0.6
8 0 11 2394.4 0.5
9 0 12 2394.4 0.6
10 1 0 2394.4 3.9
11 1 1 2394.4 2.8
12 1 2 2394.4 1.9
13 1 3 2394.4 1.6
14 1 4 2394.4 1.4
15 1 8 2394.4 1.2
16 1 9 2394.4 1.0
17 1 10 2394.4 0.8
18 1 11 2394.4 0.8
19 1 12 2394.4 0.7
20 0 0 2394.4 2.7
21 0 1 2394.4 0.7
22 0 2 2394.4 0.4
23 0 3 2394.4 0.5
24 0 4 2394.4 0.5
25 0 8 2394.4 0.4
26 0 9 2394.4 0.4
27 0 10 2394.4 0.4
28 0 11 2394.4 0.4
29 0 12 2394.4 0.4
30 1 0 2394.4 1.0
31 1 1 2394.4 0.8
32 1 2 2394.4 0.6
33 1 3 2394.4 0.5
34 1 4 2394.4 0.5
35 1 8 2394.4 0.5
36 1 9 2394.4 0.5
37 1 10 2394.4 0.4
38 1 11 2394.4 0.4
39 1 12 2394.4 0.4

Simulating `input.scs' on mpw-80 at 1:04:19 PM, Sat Jan 8, 2022 (process id: 266633).
Current working directory: /home2/mpw8002/binhngo/03_ss28lpp/simulation/02_esd_tb/spectre/config/netlist
Command line:
/tools/CADENCE/MMSIM141/tools/bin/spectre -64 input.scs +escchars \
+log ../psf/spectre.out +inter=mpsc \
+mpssession=spectre4_174129_47 -format sst2 -raw ../psf \
+lqtimeout 900 -maxw 5 -maxn 5 +mt=4

WARNING (SPECTRE-497): The multithreading option has been ignored because the multithreading feature is no longer supported in Spectre. To use the multithreading capability, add +aps in the command-line and rerun the simulation.spectre pid = 266633

Loading /tools/CADENCE/MMSIM141/tools.lnx86/cmi/lib/64bit/5.0/libinfineon_sh.so ...
Loading /tools/CADENCE/MMSIM141/tools.lnx86/cmi/lib/64bit/5.0/libphilips_o_sh.so ...
Loading /tools/CADENCE/MMSIM141/tools.lnx86/cmi/lib/64bit/5.0/libphilips_sh.so ...
Loading /tools/CADENCE/MMSIM141/tools.lnx86/cmi/lib/64bit/5.0/libsparam_sh.so ...
Loading /tools/CADENCE/MMSIM141/tools.lnx86/cmi/lib/64bit/5.0/libstmodels_sh.so ...
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/simulation/02_esd_tb/spectre/config/netlist/input.scs
Reading file: /tools/CADENCE/MMSIM141/tools.lnx86/spectre/etc/configs/spectre.cfg
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/LNR28LPP_Spectre.lib
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/LIB.MODELS.LNR28LPP
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/design.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/shared.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/shared.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/beol.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/beol.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/skew.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/montecarlo.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/correlation.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/fet_param.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/fets.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_anglvtnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_anglvtpfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_dplnfetpd.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_dplnfetwl.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_dplpfetpu.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_dswnfetpd.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_dswnfetwl.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_dswpfetpu.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egpfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egpsnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egpspfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egvnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egvpfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egzvtnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_hvtnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_hvtpfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lshnfetpd.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lshnfetwl.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lshpfetpu.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lslnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lslnfetpd.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lslnfetwl.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lslpfetpu.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lsrnfetpd.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lsrnfetwl.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lsrpfetpu.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lvtnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lvtpfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_nfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_pfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_slvtnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_slvtpfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_zvtnfet.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/rf_fets.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egnfet_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egpfet_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egvnfet_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_egvpfet_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lvtnfet_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_lvtpfet_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_nfet_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/model_pfet_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/design_sec.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/shared_sec.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/skew_sec.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/montecarlo_sec.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/correlation_sec.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/fet_param_sec.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/fets_sec.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/model_hl152nfetpd.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/model_hl152nfetwl.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/model_hl152pfetpu.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/esdnsh_3stk_spe.va
Reading file: /tools/CADENCE/MMSIM141/tools.lnx86/spectre/etc/ahdl/constants.vams
Reading file: /tools/CADENCE/MMSIM141/tools.lnx86/spectre/etc/ahdl/disciplines.vams
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/esdpsh_3stk_spe.va
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/esdnsh_3stk.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/esdpsh_3stk.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diode_param.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diode_param.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diodenx.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/egdiodenx.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diodenwx.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diodepnw.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/egdiodepnw.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diodepwtw.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diodetwx.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diodenwx_lvs.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diodepwtw_lvs.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/diodetwx_lvs.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/tdndsx.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/tdpdnw.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/egtdndsx.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/egtdpdnw.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/resistor_param.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/resistor_param.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/opppcres.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/opndres.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/nwres.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/opppcres_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/mosvar_param.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/ncap.va
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/ncap.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/egncap.va
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/egncap.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/ncap_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/egncap_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esd_modules.va
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdnsh_spe.va
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdpsh_spe.va
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdnsh_stk_spe.va
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdpsh_stk_spe.va
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esd_param.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esd_param.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdvpnp.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdvpnp_eg.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdvnpn.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdvnpn_eg.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdndsx.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdndsx_eg.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdnsh.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdnsh_stk.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdpsh.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdpsh_stk.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdscr_dw.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/esdscr_tw.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/sblkndres.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/sblkpdres.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/vpnp.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/vpnp.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/symindp_rf.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/symindp_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w22_n_n_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w22_n_sh_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w22_ct_n_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w22_ct_sh_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w15_n_n_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w15_n_sh_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w15_ct_n_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w15_ct_sh_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w15_n_n_n.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w15_n_sh_n.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w15_ct_n_n.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w15_ct_sh_n.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w23_n_n_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w23_n_sh_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w23_ct_n_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w23_ct_sh_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w21_n_n_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w21_n_sh_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w21_ct_n_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/indfiles/w21_ct_sh_lb.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/vncap.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/vncap_2t.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/hdvncap.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/hdvncap_2t.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/hvvncap.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/hvvncap_2t.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/vncap_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/hdvncap_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/hvvncap_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/pad_rf.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/efuse.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/fixed_corner.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/fixed_corner_rf.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/SEC_FETS/fixed_corner_sec.lib.scs
Reading file: /home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/passive_fixed_corner.lib.scs
Time for NDB Parsing: CPU = 459.93 ms, elapsed = 545.15 ms.
Time accumulated: CPU = 487.925 ms, elapsed = 545.155 ms.
Peak resident memory used = 57.8 Mbytes.

Existing shared object for module esdnsh_spe is up to date.
Installed compiled interface for esdnsh_spe.
Existing shared object for module esdpsh_spe is up to date.
Installed compiled interface for esdpsh_spe.
Reading link: /tools/CADENCE/MMSIM141/tools.lnx86/spectre/etc/ahdl/discipline.h
Reading link: /tools/CADENCE/MMSIM141/tools.lnx86/spectre/etc/ahdl/constants.h
Existing shared object for module bsource_37dc92 is up to date.
Installed compiled interface for bsource_37dc92.
Existing shared object for module bsource_8b9223 is up to date.
Installed compiled interface for bsource_8b9223.
Existing shared object for module bsource_57f7da is up to date.
Installed compiled interface for bsource_57f7da.
Existing shared object for module bsource_0781a1 is up to date.
Installed compiled interface for bsource_0781a1.

Warning from spectre in `_sub83':`I0', during hierarchy flattening.
WARNING (SFE-30): "input.scs" 82: I0.N2_5__I0: `sizedup' is not a valid parameter for an instance of `esdnsh'. Ignored.
WARNING (SFE-30): "input.scs" 85: I0.N2_3__I0: `sizedup' is not a valid parameter for an instance of `esdnsh'. Ignored.
WARNING (SFE-30): "input.scs" 88: I0.N2_6__I0: `sizedup' is not a valid parameter for an instance of `esdnsh'. Ignored.
WARNING (SFE-30): "input.scs" 91: I0.N2_7__I0: `sizedup' is not a valid parameter for an instance of `esdnsh'. Ignored.
WARNING (SFE-30): "input.scs" 94: I0.N2_0__I0: `sizedup' is not a valid parameter for an instance of `esdnsh'. Ignored.
Further occurrences of this warning will be suppressed.
Error found by spectre in `_sub83':`I0', during hierarchy flattening.
ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 22: I0.N2_3__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 22: I0.N2_3__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 22: I0.N2_3__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 22: I0.N2_3__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 24: I0.N2_3__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 24: I0.N2_3__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 24: I0.N2_3__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 24: I0.N2_3__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 26: I0.N2_6__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 26: I0.N2_6__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 26: I0.N2_6__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 26: I0.N2_6__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 28: I0.N2_6__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 28: I0.N2_6__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 28: I0.N2_6__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 28: I0.N2_6__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 30: I0.N2_7__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 30: I0.N2_7__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 30: I0.N2_7__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 30: I0.N2_7__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 32: I0.N2_7__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 32: I0.N2_7__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 32: I0.N2_7__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 32: I0.N2_7__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 34: I0.N2_0__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 34: I0.N2_0__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 34: I0.N2_0__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 34: I0.N2_0__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 36: I0.N2_0__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 36: I0.N2_0__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 36: I0.N2_0__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 36: I0.N2_0__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 38: I0.N2_2__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 38: I0.N2_2__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 38: I0.N2_2__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 38: I0.N2_2__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 40: I0.N2_2__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 40: I0.N2_2__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 40: I0.N2_2__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 40: I0.N2_2__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 42: I0.N2_1__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 42: I0.N2_1__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 42: I0.N2_1__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 42: I0.N2_1__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 44: I0.N2_1__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 44: I0.N2_1__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 44: I0.N2_1__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 44: I0.N2_1__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 20: I0.N2_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 46: I0.N2_4__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 46: I0.N2_4__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 46: I0.N2_4__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 46: I0.N2_4__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 18: I0.N2_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 48: I0.N2_4__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 48: I0.N2_4__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 48: I0.N2_4__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 48: I0.N2_4__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 54: I0.P4_3__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 54: I0.P4_3__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 54: I0.P4_3__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 54: I0.P4_3__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 56: I0.P4_3__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 56: I0.P4_3__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 56: I0.P4_3__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 56: I0.P4_3__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 58: I0.P4_6__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 58: I0.P4_6__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 58: I0.P4_6__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 58: I0.P4_6__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 60: I0.P4_6__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 60: I0.P4_6__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 60: I0.P4_6__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 60: I0.P4_6__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 62: I0.P4_7__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 62: I0.P4_7__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 62: I0.P4_7__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 62: I0.P4_7__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 64: I0.P4_7__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 64: I0.P4_7__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 64: I0.P4_7__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 64: I0.P4_7__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 66: I0.P4_0__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 66: I0.P4_0__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 66: I0.P4_0__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 66: I0.P4_0__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 68: I0.P4_0__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 68: I0.P4_0__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 68: I0.P4_0__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 68: I0.P4_0__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 70: I0.P4_2__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 70: I0.P4_2__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 70: I0.P4_2__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 70: I0.P4_2__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 72: I0.P4_2__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 72: I0.P4_2__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 72: I0.P4_2__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 72: I0.P4_2__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 74: I0.P4_1__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 74: I0.P4_1__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 74: I0.P4_1__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 74: I0.P4_1__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 76: I0.P4_1__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 76: I0.P4_1__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 76: I0.P4_1__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 76: I0.P4_1__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 52: I0.P4_5__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 78: I0.P4_4__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 78: I0.P4_4__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 78: I0.P4_4__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 78: I0.P4_4__RR1: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 50: I0.P4_5__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 80: I0.P4_4__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 80: I0.P4_4__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 80: I0.P4_4__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

ERROR (SFE-1997): "input.scs" 80: I0.P4_4__RR0: parameter `dtemp': The parameter `_par0' is used but not set.

Error found by spectre during hierarchy flattening.
ERROR (SFE-1997): "input.scs" 82: I0.N2_5__I0: parameter `wesd': The parameter `_par3' is used but not set.

ERROR (SFE-1997): "input.scs" 82: I0.N2_5__I0: parameter `lesd': The parameter `_par4' is used but not set.

ERROR (SFE-1997): "input.scs" 82: I0.N2_5__I0: parameter `wesd': The parameter `_par3' is used but not set.

ERROR (SFE-1997): "input.scs" 82: I0.N2_5__I0: parameter `lesd': The parameter `_par4' is used but not set.

ERROR (SFE-1997): "input.scs" 82: I0.N2_5__I0: parameter `lesd': The parameter `_par4' is used but not set.

ERROR (SFE-1997): "input.scs" 82: I0.N2_5__I0: parameter `lesd': The parameter `_par4' is used but not set.

ERROR (SFE-1997): "input.scs" 82: I0.N2_5__I0: parameter `lesd': The parameter `_par4' is used but not set.

ERROR (SFE-1997): "input.scs" 82: I0.N2_5__I0: parameter `lesd': The parameter `_par4' is used but not set.

Error found by spectre in `_sub83':`I0', during hierarchy flattening.
ERROR (SFE-1997): "input.scs" 82: I0.N2

pre-layout netlist

// Generated for: spectre
// Generated on: Jan 8 14:14:29 2022
// Design library name: 04_Ported_Circulator
// Design cell name: 02_esd_tb
// Design view name: config
simulator lang=spectre
global 0
parameters vdcin=1 vddio=1.8
include "/home2/mpw8002/binhngo/03_ss28lpp/Spectre_S00-V1.4.6.2/LNR28LPP_Spectre.lib" section=nn

// Library name: cmos28lp
// Cell name: esdegpfet
// View name: schematic
// Inherited view list: spectre cmos_sch cmos.sch schematic veriloga ahdl
//pspice dspf
subckt esdegpfet b d g s
parameters w=2.06u l=1u ps=0u pd=0u as=0u ad=0u sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 \
lsop=0.2u ldop=2u gns=1
M0 (net13 net15 net14 b) egpfet w=w l=l nf=(1)*(1) ps=ps pd=pd as=as \
ad=ad sa=sa sb=sb sd=sd dtemp=trise swtwell=0 ptwell=ptwell \
plorient=plorient pccrit=0 p_la=0u ngcon=ngcon
R1 (s net14 b) sblkpdres w=w l=lsop s=1 pbar=1 dtemp=trise sh=1
R0 (d net13 b) sblkpdres w=w l=ldop s=1 pbar=1 dtemp=trise sh=1
I0 (net13 g net14 b net15) esdpsh wesd=w lesd=l nf=1 ldop=ldop \
lsop=lsop esdoxide=2 gns=gns
ends esdegpfet
// End of subcircuit definition.

// Library name: cmos28lp
// Cell name: esdegnfet
// View name: schematic
// Inherited view list: spectre cmos_sch cmos.sch schematic veriloga ahdl
//pspice dspf
subckt esdegnfet b d g s
parameters w=2.06u l=1u ps=0u pd=0u as=0u ad=0u sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 ldop=2u \
lsop=0.2u gns=1
M0 (net13 net15 net14 b) egnfet w=w l=l nf=(1)*(1) ps=ps pd=pd as=as \
ad=ad sa=sa sb=sb sd=sd dtemp=trise swtwell=0 ptwell=ptwell \
plorient=plorient pccrit=0 p_la=0u ngcon=ngcon
R0 (d net13 b) sblkndres w=w l=ldop s=1 pbar=1 dtemp=trise sh=1
R1 (s net14 b) sblkndres w=w l=lsop s=1 pbar=1 dtemp=trise sh=1
I0 (net13 g net14 b net15) esdnsh wesd=w lesd=l nf=1 ldop=ldop \
lsop=lsop esdoxide=2 gns=gns
ends esdegnfet
// End of subcircuit definition.

// Library name: 04_Ported_Circulator
// Cell name: 02_esd_IO_rf
// View name: schematic
// Inherited view list: spectre cmos_sch cmos.sch schematic veriloga ahdl
//pspice dspf
subckt _sub86 PAD VDDIO VSS
P3 (PAD VSS) pad_rf l=85u w=70u bp=8 pkg=2
P4\<0\> (VDDIO PAD VDDIO VDDIO) esdegpfet w=40u l=0.5u \
ps=2*((1)*((0.2u) + 2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + \
2e-07 + 4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) \
ad=((2u) + 2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 \
lsop=0.2u ldop=2u gns=1
P4\<1\> (VDDIO PAD VDDIO VDDIO) esdegpfet w=40u l=0.5u \
ps=2*((1)*((0.2u) + 2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + \
2e-07 + 4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) \
ad=((2u) + 2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 \
lsop=0.2u ldop=2u gns=1
P4\<2\> (VDDIO PAD VDDIO VDDIO) esdegpfet w=40u l=0.5u \
ps=2*((1)*((0.2u) + 2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + \
2e-07 + 4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) \
ad=((2u) + 2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 \
lsop=0.2u ldop=2u gns=1
P4\<3\> (VDDIO PAD VDDIO VDDIO) esdegpfet w=40u l=0.5u \
ps=2*((1)*((0.2u) + 2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + \
2e-07 + 4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) \
ad=((2u) + 2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 \
lsop=0.2u ldop=2u gns=1
P4\<4\> (VDDIO PAD VDDIO VDDIO) esdegpfet w=40u l=0.5u \
ps=2*((1)*((0.2u) + 2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + \
2e-07 + 4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) \
ad=((2u) + 2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 \
lsop=0.2u ldop=2u gns=1
P4\<5\> (VDDIO PAD VDDIO VDDIO) esdegpfet w=40u l=0.5u \
ps=2*((1)*((0.2u) + 2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + \
2e-07 + 4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) \
ad=((2u) + 2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 \
lsop=0.2u ldop=2u gns=1
P4\<6\> (VDDIO PAD VDDIO VDDIO) esdegpfet w=40u l=0.5u \
ps=2*((1)*((0.2u) + 2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + \
2e-07 + 4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) \
ad=((2u) + 2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 \
lsop=0.2u ldop=2u gns=1
P4\<7\> (VDDIO PAD VDDIO VDDIO) esdegpfet w=40u l=0.5u \
ps=2*((1)*((0.2u) + 2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + \
2e-07 + 4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) \
ad=((2u) + 2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) \
sb=(2u)+(0.29u) sd=0u trise=0 ptwell=0 plorient=1 ngcon=2 \
lsop=0.2u ldop=2u gns=1
N2\<0\> (VSS PAD VSS VSS) esdegnfet w=40u l=0.5u ps=2*((1)*((0.2u) + \
2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + 2e-07 + \
4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) ad=((2u) + \
2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) sb=(2u)+(0.29u) sd=0u \
trise=0 ptwell=0 plorient=1 ngcon=2 ldop=2u lsop=0.2u gns=1
N2\<1\> (VSS PAD VSS VSS) esdegnfet w=40u l=0.5u ps=2*((1)*((0.2u) + \
2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + 2e-07 + \
4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) ad=((2u) + \
2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) sb=(2u)+(0.29u) sd=0u \
trise=0 ptwell=0 plorient=1 ngcon=2 ldop=2u lsop=0.2u gns=1
N2\<2\> (VSS PAD VSS VSS) esdegnfet w=40u l=0.5u ps=2*((1)*((0.2u) + \
2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + 2e-07 + \
4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) ad=((2u) + \
2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) sb=(2u)+(0.29u) sd=0u \
trise=0 ptwell=0 plorient=1 ngcon=2 ldop=2u lsop=0.2u gns=1
N2\<3\> (VSS PAD VSS VSS) esdegnfet w=40u l=0.5u ps=2*((1)*((0.2u) + \
2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + 2e-07 + \
4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) ad=((2u) + \
2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) sb=(2u)+(0.29u) sd=0u \
trise=0 ptwell=0 plorient=1 ngcon=2 ldop=2u lsop=0.2u gns=1
N2\<4\> (VSS PAD VSS VSS) esdegnfet w=40u l=0.5u ps=2*((1)*((0.2u) + \
2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + 2e-07 + \
4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) ad=((2u) + \
2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) sb=(2u)+(0.29u) sd=0u \
trise=0 ptwell=0 plorient=1 ngcon=2 ldop=2u lsop=0.2u gns=1
N2\<5\> (VSS PAD VSS VSS) esdegnfet w=40u l=0.5u ps=2*((1)*((0.2u) + \
2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + 2e-07 + \
4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) ad=((2u) + \
2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) sb=(2u)+(0.29u) sd=0u \
trise=0 ptwell=0 plorient=1 ngcon=2 ldop=2u lsop=0.2u gns=1
N2\<6\> (VSS PAD VSS VSS) esdegnfet w=40u l=0.5u ps=2*((1)*((0.2u) + \
2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + 2e-07 + \
4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) ad=((2u) + \
2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) sb=(2u)+(0.29u) sd=0u \
trise=0 ptwell=0 plorient=1 ngcon=2 ldop=2u lsop=0.2u gns=1
N2\<7\> (VSS PAD VSS VSS) esdegnfet w=40u l=0.5u ps=2*((1)*((0.2u) + \
2e-07 + 4e-08/2.0)+(40u)) pd=2*((1)*((2u) + 2e-07 + \
4e-08/2.0)+(40u)) as=((0.2u) + 2e-07 + 4e-08/2.0)*(40u) ad=((2u) + \
2e-07 + 4e-08/2.0)*(40u) sa=(0.2u)+(0.29u) sb=(2u)+(0.29u) sd=0u \
trise=0 ptwell=0 plorient=1 ngcon=2 ldop=2u lsop=0.2u gns=1
ends _sub86
// End of subcircuit definition.

// Library name: 04_Ported_Circulator
// Cell name: 02_esd_tb
// View name: schematic
// Inherited view list: spectre cmos_sch cmos.sch schematic veriloga ahdl
// pspice dspf
V1 (net3 0) vsource dc=vdcin type=dc
V0 (net2 0) vsource dc=vddio type=dc
C0 (net4 0) capacitor c=1p
I0 (net3 net2 0) _sub86
simulatorOptions options reltol=1e-5 vabstol=1e-8 iabstol=1e-13 temp=27 \
tnom=25 scalem=1.0 scale=1.0 gmin=1e-12 rforce=1 maxnotes=5 maxwarns=5 \
digits=5 cols=80 pivrel=1e-3 sensfile="../psf/sens.output" \
checklimitdest=psf colonasdelimiter=none
dcOp dc write="spectre.dc" maxiters=150 maxsteps=10000 annotate=status
dcOpInfo info what=oppoint where=rawfile
modelParameter info what=models where=rawfile
element info what=inst where=rawfile
outputParameter info what=output where=rawfile
designParamVals info what=parameters where=rawfile
primitives info what=primitives where=rawfile
subckts info what=subckts where=rawfile
saveOptions options save=allpub

Andrew Beckett over 3 years ago

Well, it's clear from the above that the _sub86 cell in the post-layout is expecting _dpar0 to be specified - either in the definition or the instance. However, it's really hard to see how it got into this state - the pre-layout has parameters in the "esd" subckt such as trise which are obviously corresponding to the parameter mapped to _dpar0. The challenges are that trying to figure out whether it's a problem with your layout pcell (which seems a bit odd, since you'd expect that to be irrelevant by the time the extraction is used) or the extraction itself is rather hard. If it's related to extraction you're asking in the wrong place since Calibre is not a Cadence tool (it's from Siemens EDA). If it's related to the PCell, debugging it in a public forum is going to be impossible. So I would suggest starting with Cadence customer support to see if there's something obvious on our side, but if not you may well need to speak to Siemens EDA (Mentor).

Andrew
Cancel
Vote Up 0 Vote Down

Cancel
Binhngo1210 over 3 years ago in reply to Andrew Beckett

thanks for your advice. i attempted to ask IC EDA forum of siemens several times but honestly they do not have such an informative support page like what cadence has done so far ( or they operate in another manner that I have no idea). So anyway, My temporary solution is to set manually a bunch of global variables with values referred from pre-layout netlist that can solve errors from post0layout netlist. For ex: trise = 0 in prelayout netlist, wesd = 2.06u...

How well it should be possible? Could you give me some hints ?
Cancel
Vote Up 0 Vote Down

Cancel
Andrew Beckett over 3 years ago in reply to Binhngo1210

Binhngo1210 said:
How well it should be possible? Could you give me some hints ?

As I suggested, log a case with customer support (I provided a link in my previous reply). Where you're posting now is not customer support - it's the community forums, and is best suited to quick questions that can be answered without necessarily needing to share complex setup - because it's all in the public domain and anyone can answer. It's not part of my role at Cadence to respond here; I do so in my spare time and this has to be balanced against other support work that I do as part of my real job. So the right thing to do here is to use the proper support channel. We can then understand better what is going on and suggest some workarounds, and properly identify whether the issue really is due to the Calibre extraction doing something wrong (so then you can take this up with Siemen's support channel; I can't answer what the right process is for that, as you're their customer they must have some channel for support).

Trying to debug this with just the symptoms and not being able to see what's in the actual extracted view is very hard as it's unclear how things are set up and what exactly has ended up in the extracted view.

Andrew
Cancel
Vote Up 0 Vote Down

Cancel

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.