Stats

Locked Locked
Replies 2
Subscribers 49
Views 13519
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PSPICE Model Editor

Amritapuri over 16 years ago

How do we verify the model characteristics of the devices from the PSPICE Model Editor?

For example, a diode model editor providing the V-I characteristics ...

oldmouldy over 16 years ago

As an example, put the resulting device in a test circuit and sweep the voltage using a DC sweep. A VDC can be used as a voltage source, for a typical diode sweep the voltage from 0 to 1V in 10m or 1m intervals and probe the forward current, after running the simulation the Probe Window will display the results.
Cancel
Vote Up 0 Vote Down

Cancel
Amritapuri over 16 years ago

Hi oldmouldy
that's so lovely ...
Cancel
Vote Up 0 Vote Down

Cancel

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.