Stats

  • Locked Locked
  • Replies 10
  • Subscribers 49
  • Views 20738
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No Pspice template issue

tt543

Hi,

I've had a stable working testbench in Orcad Capture until several days ago when something happened and some of the components "lost" their template. But the issue appears to be not limited to my testbench. I tried building a simple circuit from scratch (just a voltage source, resistor and ground) using pspice_elem library for the resistor. And I get the same "No Pspice template for R1, ignoring" message. It seems to me as environment related issue. Any help will be appreciated. Thanks in advance.

Parents

  • It seems that your installation hierarchy has few files missing. I suspect that you do not have all necessary files present under ../tools/pspice/library folder. You should have *.lib, *.prp and *.ind files for most of the .lib. Can you try after checking and restoring missing files?

Reply

  • It seems that your installation hierarchy has few files missing. I suspect that you do not have all necessary files present under ../tools/pspice/library folder. You should have *.lib, *.prp and *.ind files for most of the .lib. Can you try after checking and restoring missing files?

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.