Community Hardware/Software Co-Development, Verification… Matlab cannot open Pspice, to prompt orCEFSimpleUI.exe that...

Stats

  • Locked Locked
  • Replies 0
  • Subscribers 55
  • Views 12028
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Matlab cannot open Pspice, to prompt orCEFSimpleUI.exe that it has stopped working！

hmf1235789

Cadence_SPB_17.4-2019 + Matlab R2019a

请参考本文档中的步骤进行操作

1，打开BJT_AMP.opj

2，设置Matlab路径

3，打开BJT_AMP_SLPS.slx

4，打开后，设置PSpiceBlock，出现或CEFSimpleUI.exe停止工作

5，添加模块

6，相同

7，打开pspsim.slx

8，相同

9，打开C：\ Cadence \ Cadence_SPB_17.4-2019 \ tools \ bin

orCEFSimpleUI.exe和orCEFSimple.exe

 

10，相同

我想问一下如何解决，非常感谢！

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.