Stats

  • Locked Locked
  • Replies 10
  • Subscribers 64
  • Views 5452
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help!on spiral inductor modeling!

tjjbraye
Hi every buddy,

I'm using VPCM from MMSIM61 in IC610 platform for modeling  spiral inductor .After generating cell,I could only open layout view.But I can't open any other view such as symbol,schematic.In the CIW prompt window,it gives the following warning:
*WARNING* dbOpenCellViewByType: Design database revision (59) is not compatible with current revision (99).

So what 's wrong with me?
My component type is differential inductor and shape is octagonal with 2 ports.
Accuracy selection:Full-Wave EM Solver.
Please,anybody can help mee!
Thank you in advance!
Parents

  • What IC version are you using? (what does "virtuoso -W" output?). The currently supported IC6 release is IC613, and the currently supported MMSIM versions are MMSIM70 and MMSIM71.

    I should also point out that VPCD has been end-of-lifed before Christmas...

    Regards,

    Andrew.

Reply

  • What IC version are you using? (what does "virtuoso -W" output?). The currently supported IC6 release is IC613, and the currently supported MMSIM versions are MMSIM70 and MMSIM71.

    I should also point out that VPCD has been end-of-lifed before Christmas...

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.