Stats

  • Locked Locked
  • Replies 13
  • Subscribers 66
  • Views 20533
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to make ADE XL start a simulation

Spirito

Recently I moved to work with IC 6.1.3 , where the monte carlo was moved to ADE XL.

I am able to start the ADE XL and set up everything , but when I try to run monte carlo (or even a single sweep)  I get error message 

ADEXL-1921 (see Attachment. Are there new environment variables I forgot ?

 

Parents

  • Andrew,

    At first thanks for your quick and helpful feedback :-) I am the license administrator of our lab and i tried to perform the reg with our server's MAC address and it failed...What else could be a host ID?I have noticed when spectre simulations start,there is a number indicated as Host ID,could this be what i need to do the reg correctly?In any case,i will ask my professor and if needed we will contact Europractice to provide us with the correct info.

    I searched over the net,but i can't locate the libgdbm.so.2 rpm for OpenSuse 11.1 x64...i found only the rpm libgdbm.so.3 but fails to install.In addition,the rpm sources that linux installation has by default doesn't seem to find what i search for.Do you have a link that installs properly?I would appreciate a final helpful answer.

    Thank you in advance.

    My Best Regards,

    Jimito13

Reply

  • Andrew,

    At first thanks for your quick and helpful feedback :-) I am the license administrator of our lab and i tried to perform the reg with our server's MAC address and it failed...What else could be a host ID?I have noticed when spectre simulations start,there is a number indicated as Host ID,could this be what i need to do the reg correctly?In any case,i will ask my professor and if needed we will contact Europractice to provide us with the correct info.

    I searched over the net,but i can't locate the libgdbm.so.2 rpm for OpenSuse 11.1 x64...i found only the rpm libgdbm.so.3 but fails to install.In addition,the rpm sources that linux installation has by default doesn't seem to find what i search for.Do you have a link that installs properly?I would appreciate a final helpful answer.

    Thank you in advance.

    My Best Regards,

    Jimito13

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.