Stats

  • Locked Locked
  • Replies 1
  • Subscribers 63
  • Views 12996
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fine waveform generation for publications

MNNIT

 Can any one say how could I get waveform that got generated from Cadence Spectre can be saved such as to be used for publications.

Actusally the images saved in png,etc forms are not with good clarity.

 Can you say how could I get fine waveform image even the axis can be viewd even size is physically minimized

 

Thanking you

Parents

  • You seem to have asked the same question twice, and not responded to the question about your statement about "fine waveform image even the axis can be viewd even size is physically minimized" which doesn't make sense - see http://www.cadence.com/Community/forums/p/13441/20901.aspx#20901

    Anyway, my guess is that you want a png with higher resolution. The way to do this with wavescan/ViVA is to use the File->Plot to plot to a PostScript file, and then use a tool such as "pstoimg" to convert it to a png file. The PostScript can then have (say) 300 dots per inch, which will be higher resolution than on the screen. .

    In future we plan to improve the printing and image generation, and I believe it will then be possible to directly generate higher resolution images (as you can in IC613 for exporting images from the schematic and layout windows).

    Regards,

    Andrew.

Reply

  • You seem to have asked the same question twice, and not responded to the question about your statement about "fine waveform image even the axis can be viewd even size is physically minimized" which doesn't make sense - see http://www.cadence.com/Community/forums/p/13441/20901.aspx#20901

    Anyway, my guess is that you want a png with higher resolution. The way to do this with wavescan/ViVA is to use the File->Plot to plot to a PostScript file, and then use a tool such as "pstoimg" to convert it to a png file. The PostScript can then have (say) 300 dots per inch, which will be higher resolution than on the screen. .

    In future we plan to improve the printing and image generation, and I believe it will then be possible to directly generate higher resolution images (as you can in IC613 for exporting images from the schematic and layout windows).

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.