Stats

  • Locked Locked
  • Replies 8
  • Subscribers 63
  • Views 17328
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Facing problem during simulation using external .txt file as stimulus

Analog Design

 Hi ,

     I am giving two column (time/voltage ) .txt file  as  stimulus in spectre  . But during simulation the error coming as like below 

"Error  found by spectre during circuit read in" .  

Parents

  • I suspect it said more than that - that's usually the summary error message - after a specific error. Please show the line in the netlist with the vsource component which is referencing the file (if it's a small example, post the entire netlist; presumably you could do this with a simple circuit which just had the source and (say) a resistor to show the problem). Please give the version of spectre used. Please also show the contents of the file too.

    You've given so little information, that it's very hard to know what to suggest.

    Regards,

    Andrew.

Reply

  • I suspect it said more than that - that's usually the summary error message - after a specific error. Please show the line in the netlist with the vsource component which is referencing the file (if it's a small example, post the entire netlist; presumably you could do this with a simple circuit which just had the source and (say) a resistor to show the problem). Please give the version of spectre used. Please also show the contents of the file too.

    You've given so little information, that it's very hard to know what to suggest.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.