Stats

  • Locked Locked
  • Replies 7
  • Subscribers 63
  • Views 18328
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

freq divider pins in rflib

ddis

hi all, i want to divide the o/p freq of Quad-VCO i.e. 4.8 GHz into 2.4 GHz. for this purpose i need a freq divider ckt. i saw the freq divider from RF library in cadence. it is containing 4 pins (pin, pout,nin, nout).

how to apply stimulus to this pins & check the o/p

i dont know what nout stands for here

pin might be i/p power, pout might be o/p power

nin might be divide no.

 

 

Parents

  • Ask your supervisor?

    Seriously, do you think there is anywhere enough information in your question for anyone to be able to give a sensible answer? You have given no clue what "pin, pout, nin and nout" pins are, or what it is you're actually trying to find about the divider. Are you interested in whether it functionally works, what the rise time of the edges are, the noise performance, distortion - you could be asking anything.

    As explained in the Forum Guidelines, asking a specific and bounded question is much more likely to get an answer. Maybe if you read them and supply sufficient information, somebody can answer  you.

    Andrew.

Reply

  • Ask your supervisor?

    Seriously, do you think there is anywhere enough information in your question for anyone to be able to give a sensible answer? You have given no clue what "pin, pout, nin and nout" pins are, or what it is you're actually trying to find about the divider. Are you interested in whether it functionally works, what the rise time of the edges are, the noise performance, distortion - you could be asking anything.

    As explained in the Forum Guidelines, asking a specific and bounded question is much more likely to get an answer. Maybe if you read them and supply sufficient information, somebody can answer  you.

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.