Stats

  • Locked Locked
  • Replies 3
  • Subscribers 63
  • Views 2063
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cadence simulate ring oscillator's output in frequency domain (continuous wave)

chiphead

 Hi,

Could anyone please help me with this question? 

I need to simulate my ring oscillator's output in frequency domain, showing a continuous spectrum waveform as it can be seen from spectrum analyzer in the measurement (PSS->THD is not what I want).Then I can derive Q directly from it.

If there is a detailed guide, that would be very helpful.

Thanks a lot.

 

 

Parents

  • I suspect you're wanting to see the noise included in the spectrum? If you simulated using PSS, then the only place frequencies can come from is harmonics of the fundamental frequency of the oscillator - so it doesn't matter that it is in discrete multiples of the oscillator frequency -there would be no frequencies in between. If noise is involved (which of course it will), you could simulate a pnoise analysis after pss, and see the noise output (although you will get separate PSS and noise outputs).

    Maybe you can clarify precisely what it is you're after?

    Regards,

    Andrew.

Reply

  • I suspect you're wanting to see the noise included in the spectrum? If you simulated using PSS, then the only place frequencies can come from is harmonics of the fundamental frequency of the oscillator - so it doesn't matter that it is in discrete multiples of the oscillator frequency -there would be no frequencies in between. If noise is involved (which of course it will), you could simulate a pnoise analysis after pss, and see the noise output (although you will get separate PSS and noise outputs).

    Maybe you can clarify precisely what it is you're after?

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.