Stats

  • Locked Locked
  • Replies 25
  • Subscribers 63
  • Views 25741
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Using Montecarlo simulation for finding Rise and fall tile of a SETTLING waveform

RFQuery

 Dear All,

I want to do MONTE_CARLO simulation for my circuit for finding rise time and fall time.

The output is settling after 800u s.

I have to do some pre-processing before finding the last expression. The expressions I used as below.

But it did NOT work.

Can anybody tell how to find risetime and falltime of the waveform using MONTE-Carlo simulation if one needs some house-keeping processing of the waveform.

 .......

analysis('dc ?saveOppoint t  )
analysis('tran ?stop "1u"  ?errpreset "moderate"  ?maxstep "5p" 
        ?method "euler"  ?strobeperiod "5p"  )
desVar(      "frf" 6G    )
desVar(      "prf" -20    )
desVar(      "frf2" 6.1G    )
desVar(      "w" 20u    )
desVar(   "sigma" 3)
option(    'temp  "27.0"
    'iabstol  "1e-14"
    'vabstol  "1e-4"
)
saveOption( 'currents "selected" )
saveOption( 'save "all" )
temp( 27.0 )
monteCarlo( ?numIters "1" ?startIter "1"
    ?analysisVariation 'processAndMismatch ?sweptParam "None"
    ?sweptParamVals "27" ?saveData nil
    ?nomRun "yes" ?append nil
    ?saveProcessParams t
)
CLOCK_DUTY_PERIOD=2.5e-10
CLIP_START=0.8u
CLIP_END=0.9u

clip_I_P=clip( v("/MIXER_I_P" ?result 'tran) CLIP_START CLIP_END)
plot(clip_I_P)
MIN_VALUE=ymin(clip_I_P) + 0.02
MAX_VALUE=ymax(clip_I_P)- 0.03
UPPER_THRESOLD=MIN_VALUE + ( (MAX_VALUE-MIN_VALUE)*0.9 )
LOWER_THRESHOLD=MIN_VALUE + ( (MAX_VALUE-MIN_VALUE)*0.1 )
RISE_UPPER= cross( clip_I_P UPPER_THRESOLD 2 'rising )
RISE_LOWER= cross( clip_I_P LOWER_THRESHOLD 2 'rising )

monteExpr("RISE_TIME" "abs(RISE_UPPER-RISE_LOWER)")

monteRun()
Parents

  • Two things (the log file doesn't tell me very much):

    1. Can you post the bottom part of your input.scs with the montecarlo analysis statements etc (and any export statements).
    2. In the psf directory for the simulation, is there a file called something like artil.log (something like that) - can you post the contents?
    Andrew
Reply

  • Two things (the log file doesn't tell me very much):

    1. Can you post the bottom part of your input.scs with the montecarlo analysis statements etc (and any export statements).
    2. In the psf directory for the simulation, is there a file called something like artil.log (something like that) - can you post the contents?
    Andrew
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.