Stats

  • Locked Locked
  • Replies 5
  • Subscribers 64
  • Views 14814
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Export results of Monte Carlo simulation using cds_srr

aliasnikhil

Hi,

 

I simulate a VCO in my design and export results to MATLAB using the cds_srr() function. Now, to account for mismatches, I want to run a Monte Carlo simulation (only 1 run). 

1) Is there any change in the way I export the data into MATLAB after a MC run? 

2) I do not want separate mismatch statistics. Just normal tran results with mismatches accounted for. Is this the final data that is stored? Or are they separate? 

3) I did not select "Save data to allow family plots" thinking I have only 1 MC run and so it is not needed. Do I have to select it even for a single run?

 Please help.

Thanks!

-Nik 

Parents

  •  First of all, this appears to be nothing to do with cds_srr (which is the Matlab interface), so please do not append to an existing thread (see the forum guidelines, which is the first post in each forum).

    Secondly, it's pretty hard to answer this without seeing the analysis statements in  your netlist - I don't know how you've set it up. There's no reason why this should not work if things are configured correctly in the netlist.

    Regards,

    Andrew.

Reply

  •  First of all, this appears to be nothing to do with cds_srr (which is the Matlab interface), so please do not append to an existing thread (see the forum guidelines, which is the first post in each forum).

    Secondly, it's pretty hard to answer this without seeing the analysis statements in  your netlist - I don't know how you've set it up. There's no reason why this should not work if things are configured correctly in the netlist.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.