Stats

  • Locked Locked
  • Replies 3
  • Subscribers 63
  • Views 19430
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Jumpstart to Verilog-A language

Alex Vasjanov

Hello, Cadence community,

Lately I've found a need of specific digital or analog components to test analog circuit performance that can be described using Verilog-A programming language, but the problem is - I am not sure where to start.

I've found the following documents describing Verilog in Cadence:

  • Verilog-A Language Reference Manual Analog Extensions to Verilog HDL (very old, 1996 year)
  • Cadence Verilog Language and Simulation Lecture Manual

 Could someone recommend literature (I assume Cadence datasheets) on the following topics:

  • Verilog-A (including the analog part) language reference, manual, tutorial, user guide (a bit newer than the year of 1996 would be nice)
  • Reference (manual, tutorial, user guide) on how to handle the code in Cadence - creating schematic components based on the verilog code,comiling the code (not sure this is needed or not) and similar topics

And one more thing, is there any specific Verilog coding environment in Cadence? For example OCEAN doesn't have that luxury, SKILL has a debugger and what about Verilog?

 

Regards,

Aleksandr

Parents

  • Not sure why you would be looking at such an old document, when there are manuals in your software installations.

    For example, look at <MMSIMinstDir>/doc/veriaref/veriaref.pdf (you can find this in cdnshelp too). There's also the Verilog-AMS reference in <INCISIVinstDir>/doc/verilogamsref/verilogamsref.pdf .

    I'd also recommend The Designer's Guide to Verilog-AMS as a good place to start.

    There's a debugging environment as part of AMS Designer too (more for Verilog-AMS, but could be used for Verilog-A and certainly digital Verilog as well).

    Regards,

    Andrew.

Reply

  • Not sure why you would be looking at such an old document, when there are manuals in your software installations.

    For example, look at <MMSIMinstDir>/doc/veriaref/veriaref.pdf (you can find this in cdnshelp too). There's also the Verilog-AMS reference in <INCISIVinstDir>/doc/verilogamsref/verilogamsref.pdf .

    I'd also recommend The Designer's Guide to Verilog-AMS as a good place to start.

    There's a debugging environment as part of AMS Designer too (more for Verilog-AMS, but could be used for Verilog-A and certainly digital Verilog as well).

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.