Stats

  • Locked Locked
  • Replies 4
  • Subscribers 63
  • Views 17569
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IF Statement with strings

MauMarulanda

During spectre simulaiton, I am working in an RF model where I have to select the the netlist based on the port that is selected and pass as a parameter.

Can I do this with an if statement (I can do it in hspice).

A brief example

subckt testme n p
parameters port="m3" m3="m3" m1="m1" m2="m2"
if(port == m3) {
parameters a=30
parameters c=100f
} else if(port == m2) {
parameters a=20
parameters c=100f
} else {
parameters a=10
parameters c=100f
}
r1 n np resistor r=a
c1 np p capacitor c=c
ends testme

Appreciate the help

Parents
  • Andrew Beckett

    Mauricio, I thought that I'd put the link - it's . Doing more than 2 is fine with tenary (you can chain them together) - I did that with the numerical version that showed above.

Reply
  • Andrew Beckett

    Mauricio, I thought that I'd put the link - it's . Doing more than 2 is fine with tenary (you can chain them together) - I did that with the numerical version that showed above.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.