Stats

  • Locked Locked
  • Replies 4
  • Subscribers 63
  • Views 13885
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to UN-SELECT the noise contribution of a modeled instance with Verilog-A (.va) noise source in its model file

RFStuff

Dear All,

I have some  transistors in my PDK whose model file contains  Verilog-A (.va) noise source .

So when I try to make these Transistor's Noise OFF in Spectre (MMSIM14) option, the noise coming from the Verilog-A (.va) noise source is NOT

getting OFF. In the noise summary it still shows the Noise contribution of these transistors ( basically coming from the Verilog-A noise source).

Is there any way to make the noise of the Verilog-A source OFF ?

Kind Regards,

Parents Reply Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.