Stats

  • Locked Locked
  • Replies 1
  • Subscribers 62
  • Views 13764
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multi-sinusoid in spectre port component

GGHSGP
Hi Andrew,

In "Lib:analoLib/cell: port" cdf parameters with "Display Multi sinusoid" option limited the number of frequencies as "1", if use more than 1 the "pss" analysis not recognizing rest of frequencies tones. [in IC6.1.7-64b.500.9 version]. Hope you have solution to recognize the rest of the frequency tones.

  • I split this into a separate post as it was a different topic than the previous one.

    All the multiple frequencies need to be combinations of two fundamental frequencies. You don't strictly need to set the fundamental frequencies on the first and second sinusoid, but it doesn't do any harm.

    Put another way, all the frequencies need to be n*F1+m*F2 - and then in PSS you'd set the fundamental to be the common frequency between F1 and F2. 

    Andrew.

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.