HB and TRANSIENT shows different result regarding dc block

Cadence (R) Virtuoso (R) Spectre (R) Circuit Simulator
Version 15.1.0.801.isr17 64bit -- 19 Apr 2017
Copyright (C) 1989-2017 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Virtuoso and Spectre are registered trademarks of Cadence Design Systems, Inc. All others are the property of their respective holders.

Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA Security, Inc.

User: yafimv   Host: micron.eng.tau.ac.il   HostID: 428454C2   PID: 28020
Memory  available: 16.2295 GB  physical: 33.6702 GB
Linux   : Red Hat Enterprise Linux Server release 6.9 (Santiago)
CPU Type: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
        Socket: Processors [Frequency]
        0:       0 [1998.0],  2 [1998.0],  4 [1998.0],  6 [1998.0]
        1:       1 [2499.0],  3 [1998.0],  5 [1998.0],  7 [1998.0]
        
System load averages (1min, 5min, 15min) : 2.8 %, 7.0 %, 5.1 %


Simulating `input.scs' on micron.eng.tau.ac.il at 1:26:56 PM, Mon Feb 25, 2019 (process id: 28020).
Current working directory: /data.cc/data/a/home/cc/students/enginer/yafimv/simulation/ex5_mixerr_3_33_interfer2/spectre/schematic/netlist
Command line:
    /eda_disk/cadence/tools/MMSIM/151/tools/bin/spectre -64 input.scs  \
        +escchars +log ../psf/spectre.out +inter=mpsc  \
        +mpssession=spectre0_13383_7 -format psfxl -raw ../psf  \
        +lqtimeout 900 -maxw 5 -maxn 5
spectre pid = 28020

Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libinfineon_sh.so ...
Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libphilips_o_sh.so ...
Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libphilips_sh.so ...
Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libsparam_sh.so ...
Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libstmodels_sh.so ...
Reading file:  /data.cc/data/a/home/cc/students/enginer/yafimv/simulation/ex5_mixerr_3_33_interfer2/spectre/schematic/netlist/input.scs
Reading file:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/configs/spectre.cfg
Reading file:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/configs/mapsubckt.cfg
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_NVT_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_NVT_V021.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_V111.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_V111.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_NCAP25_V113.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_NCAP25_V113.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_25_rf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_25_rf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_33IO_GOX52_VT21.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_33IO_GOX52_VT21.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_RF_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_RF_V021.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90-resistor-control-V041.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_res.va
Reading link:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/ahdl/constants.h
Reading file:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/ahdl/constants.vams
Reading link:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/ahdl/discipline.h
Reading file:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/ahdl/disciplines.vams
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_ppo_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_ppo_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_npo_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_npo_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_rnhr_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_rnhr_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_rsnwell_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_rsnwell_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_nd_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_nd_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_pd_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_pd_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_metal_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_metal_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_BJT_V111.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_BJT_V111.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_DIODE_V101.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LL12_RF_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LL12_RF_V021.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLLVT12_RF_VTAB.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLLVT12_RF_VTAB.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LL12_V102.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LL12_V102.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLHVT12_V101.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLHVT12_V101.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLLVT12_V102.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLLVT12_V102.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLNVT12_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLNVT12_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90SP_NCAP10_V112.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90SP_NCAP10_V112.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_NCAP12_LL_V102.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_NCAP12_LL_V102.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SP10_V061.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SP10_V061.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPHVT10_V111.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPHVT10_V111.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPLVT10_V102.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPLVT10_V102.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPNVT10_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPNVT10_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_mimcaps_20f_kf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_mimcaps_20f_kf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_momcaps_V041.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_momcaps_V041.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_vardiop_rf_v011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_vardiop_rf_v011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_12_llrf_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_12_llrf_V021.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/momcaps_array_vp3_rfvcl_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/momcaps_array_vp3_rfvcl_V011.typ.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/momcaps_array_vp4_rfvcl_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/momcaps_array_vp4_rfvcl_V011.typ.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnhr_rf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnhr_rf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/res_poly.va
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnnpo_rf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnnpo_rf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnppo_rf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnppo_rf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_10_sprf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_10_sprf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/bond_pad_v011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/bond_pad_v011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SP10_RF_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SP10_RF_V021.mdl.scs
Time for NDB Parsing: CPU = 206.968 ms, elapsed = 376.835 ms.
Time accumulated: CPU = 241.962 ms, elapsed = 376.845 ms.
Peak resident memory used = 45.5 Mbytes.


The CPU load for active processors is :
        Spectre  0 (59.0 %)      1 (30.6 %)      3 (2.8 %)       4 (21.1 %)
                 5 (2.6 %)       6 (8.1 %)       7 (10.5 %)     
        Other   

Warning from spectre during circuit read-in.
    WARNING (SFE-2654): VerilogA module `respoly_va' override primitive/(verilogA module) `respoly_va'.
    WARNING (SFE-2654): VerilogA module `respoly_va' override primitive/(verilogA module) `respoly_va'.
Warning from spectre during hierarchy flattening.
    WARNING (SFE-1131): Duplicate scope option `tnom' with scope `TopCircuit'. (using last value specified).

Time for Elaboration: CPU = 78.988 ms, elapsed = 80.6909 ms.
Time accumulated: CPU = 320.95 ms, elapsed = 457.818 ms.
Peak resident memory used = 54 Mbytes.

Time for EDB Visiting: CPU = 3 ms, elapsed = 3.02386 ms.
Time accumulated: CPU = 323.95 ms, elapsed = 461.189 ms.
Peak resident memory used = 54.8 Mbytes.


Notice from spectre during topology check.
    No DC path from node `I20.M7:int_g' to ground, Gmin installed to provide path.
    No DC path from node `I20.M5:int_g' to ground, Gmin installed to provide path.
    No DC path from node `RF' to ground, Gmin installed to provide path.
    No DC path from node `M0:int_g' to ground, Gmin installed to provide path.


Global user options:
             reltol = 0.001
            vabstol = 1e-06
            iabstol = 1e-12
               temp = 27
               gmin = 1e-12
             rforce = 1
           maxnotes = 5
           maxwarns = 5
             digits = 5
               cols = 80
             pivrel = 0.001
           sensfile = ../psf/sens.output
     checklimitdest = psf
               save = allpub
               tnom = 25
               tnom = 27
             scalem = 1
              scale = 1

Scoped user options:

Circuit inventory:
              nodes 56
              bsim4 14    
          capacitor 85    
              diode 4     
           inductor 14    
           resistor 35    
            vsource 8     

Analysis and control statement inventory:
                 hb 1     
               info 6     

Output statements:
             .probe 0     
           .measure 0     
               save 0     

Time for parsing: CPU = 4.999 ms, elapsed = 5.84388 ms.
Time accumulated: CPU = 328.949 ms, elapsed = 467.271 ms.
Peak resident memory used = 56.3 Mbytes.

~~~~~~~~~~~~~~~~~~~~~~
Pre-Simulation Summary
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~
Entering remote command mode using MPSC service (spectre, ipi, v0.0, spectre0_13383_7, ).

Warning from spectre.
    WARNING (SPECTRE-16707): Only tran supports psfxl format, result of other analyses will be in psfbin format.
Warning from spectre.
    WARNING (SPCRTRF-15267): The number of sources 0 is less than the number of funds 1 set in analysis.Please make sure the analysis is set up correctly.

Fundamental 0 in fundfreqs:  period = 303.03 ps, freq = 3.3 GHz, harms = 5, oversample = 1.
Fundamental 1 in fundfreqs:  period = 151.515 ps, freq = 6.6 GHz, harms = 5, oversample = 1.

****************************************************************
Harmonic Balance Steady State Analysis `hb': largefund = 3.3 GHz
****************************************************************
Use semi-autonomous solver
Warning:  Commensurate tone frequencies are detected. Although simulation result won't be affected, you might want to use incommensurate frequencies for convenience
Trying `homotopy = gmin'.

Notice from spectre during DC analysis, during periodic steady state analysis, during Harmonic Balance Steady State Analysis `hb'.
    GminDC = 1 pS is large enough to noticeably affect the DC solution.
        dV(net026) = -54.9449 mV
        Use the `gmin_check' option to eliminate or expand this report.
    Bad pivoting is found during DC analysis. Option dc_pivot_check=yes is recommended for possible improvement of convergence.

DC simulation time: CPU = 27.996 ms, elapsed = 27.565 ms.

Output and IC/nodeset summary:
                 ic     1       


Using linear IC
Linear IC: estimated frequency is 2.76904e+09 Hz

================================
`hb': time = (0 s -> 15.1515 ns)
================================

Output and IC/nodeset summary:
                 ic     1       

Important parameter values in tstab integration:
    start = 0 s
    outputstart = 0 s
    stop = 15.1515 ns
    step = 15.1515 ps
    maxstep = 3.0303 ps
    ic = all
    useprevic = no
    skipdc = no
    reltol = 1e-03
    abstol(V) = 1 uV
    abstol(I) = 1 pA
    temp = 27 C
    tnom = 27 C
    tempeffects = all
    method = traponly
    lteratio = 3.5
    relref = sigglobal
    cmin = 0 F
    gmin = 1 pS

    hb: time = 379.5 ps     (2.5 %), step = 3.03 ps       (20 m%)
    hb: time = 1.137 ns     (7.5 %), step = 3.03 ps       (20 m%)
    hb: time = 1.895 ns    (12.5 %), step = 3.03 ps       (20 m%)
    hb: time = 2.652 ns    (17.5 %), step = 3.03 ps       (20 m%)
    hb: time = 3.41 ns     (22.5 %), step = 3.03 ps       (20 m%)
    hb: time = 4.167 ns    (27.5 %), step = 3.03 ps       (20 m%)
    hb: time = 4.925 ns    (32.5 %), step = 3.03 ps       (20 m%)
    hb: time = 5.683 ns    (37.5 %), step = 3.03 ps       (20 m%)
    hb: time = 6.44 ns     (42.5 %), step = 3.03 ps       (20 m%)
    hb: time = 7.198 ns    (47.5 %), step = 3.03 ps       (20 m%)
    hb: time = 7.955 ns    (52.5 %), step = 3.03 ps       (20 m%)
    hb: time = 8.713 ns    (57.5 %), step = 3.03 ps       (20 m%)
99% of the nodes have reached steady-state after 9.09166 ns.
    hb: time = 9.47 ns     (62.5 %), step = 1.212 ps       (8 m%)
    hb: time = 10.23 ns    (67.5 %), step = 1.212 ps       (8 m%)
The Estimated oscillating frequency from Tstab Tran is = 3.02965 GHz . 

=======================================
`hb': time = (10.3038 ns -> 10.6339 ns)
=======================================

Output and IC/nodeset summary:
                 ic     1       

    hb: time = 10.31 ns    (2.99 %), step = 1.65 ps      (500 m%)
    hb: time = 10.33 ns    (7.99 %), step = 1.65 ps      (500 m%)
    hb: time = 10.35 ns      (13 %), step = 1.65 ps      (500 m%)
    hb: time = 10.36 ns      (18 %), step = 1.65 ps      (500 m%)
    hb: time = 10.38 ns      (23 %), step = 1.65 ps      (500 m%)
    hb: time = 10.4 ns       (28 %), step = 1.65 ps      (500 m%)
    hb: time = 10.41 ns      (33 %), step = 1.65 ps      (500 m%)
    hb: time = 10.43 ns      (38 %), step = 1.65 ps      (500 m%)
    hb: time = 10.45 ns      (43 %), step = 1.65 ps      (500 m%)
    hb: time = 10.46 ns      (48 %), step = 1.65 ps      (500 m%)
    hb: time = 10.48 ns      (53 %), step = 1.65 ps      (500 m%)
    hb: time = 10.5 ns       (58 %), step = 1.65 ps      (500 m%)
    hb: time = 10.51 ns      (63 %), step = 1.65 ps      (500 m%)
    hb: time = 10.53 ns      (68 %), step = 1.65 ps      (500 m%)
    hb: time = 10.54 ns      (73 %), step = 1.65 ps      (500 m%)
    hb: time = 10.56 ns      (78 %), step = 1.65 ps      (500 m%)
    hb: time = 10.58 ns      (83 %), step = 1.65 ps      (500 m%)
    hb: time = 10.59 ns      (88 %), step = 1.65 ps      (500 m%)
    hb: time = 10.61 ns      (93 %), step = 1.65 ps      (500 m%)
    hb: time = 10.63 ns      (98 %), step = 1.65 ps      (500 m%)

Notice from spectre during Harmonic Balance Steady State Analysis `hb'.
    Auto harmonic calculation has chosen 10 harmonics for tone-1.

Warning:  Commensurate tone frequencies are detected. Although simulation result won't be affected, you might want to use incommensurate frequencies for convenience
Pin node is 142, amplitude is 0.193425
Pinning node: 142, harm: 1, name: M4:int_d, value: (0.139101, 0.134403)

==============================
     Harmonic balance
  hbhomotopy=tone (1-tone)
==============================
Important HB parameters:
    RelTol=1.00e-04
    abstol(I)=1.00e-12 A
    abstol(V)=1.00e-06 V
    residualtol=1.00e+00
    lteratio=3.50e+00
    steadyratio=1.00e+00
    maxperiods=100


********** initial residual **********
Resd Norm=9.14e+02  at node I19.M3:int_g  harm=(10 0)

********** iter = 1 **********
Delta Norm=3.67e+02  at node I20.V3:p  harm=(0 0)
Resd Norm=1.43e+03  at node M0:int_d  harm=(2 0)
Frequency= 3.0296e+09 Hz, delta f= 0.00e+00

********** iter = 2 **********
Delta Norm=1.37e+01  at node I20.V0:p  harm=(2 0)
Resd Norm=1.42e+03  at node M0:int_d  harm=(2 0)
Frequency= 3.0304e+09 Hz, delta f= 7.58e+05

********** iter = 3 **********
Delta Norm=2.10e+02  at node M0:int_s  harm=(2 0)
Resd Norm=3.88e+02  at node I20.M0:int_d  harm=(0 0)
Frequency= 3.0451e+09 Hz, delta f= 1.47e+07

********** iter = 4 **********
Delta Norm=5.76e+01  at node I20.V0:p  harm=(2 0)
Resd Norm=3.78e+02  at node I20.M0:int_d  harm=(0 0)
Frequency= 3.0438e+09 Hz, delta f= -1.30e+06

********** iter = 5 **********
Delta Norm=7.88e+01  at node V2:p  harm=(2 0)
Resd Norm=3.12e+02  at node I20.M0:int_d  harm=(0 0)
Frequency= 3.0398e+09 Hz, delta f= -3.94e+06

********** iter = 6 **********
Delta Norm=1.70e+02  at node V2:p  harm=(2 0)
Resd Norm=2.27e+02  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0341e+09 Hz, delta f= -5.77e+06

********** iter = 7 **********
Damping Factor is 0.2 
Delta Norm=8.76e+01  at node V2:p  harm=(4 0)
Resd Norm=2.00e+02  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0335e+09 Hz, delta f= -5.42e+05

********** iter = 8 **********
Damping Factor is 0.1 
Delta Norm=7.27e+01  at node V2:p  harm=(4 0)
Resd Norm=1.92e+02  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0328e+09 Hz, delta f= -7.41e+05

********** iter = 9 **********
Damping Factor is 0.1 
Delta Norm=1.07e+02  at node V2:p  harm=(4 0)
Resd Norm=1.94e+02  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0344e+09 Hz, delta f= 1.63e+06

********** iter = 10 **********
Delta Norm=2.74e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.03e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0362e+09 Hz, delta f= 1.80e+06

********** iter = 11 **********
Damping Factor is 0.1 
Delta Norm=7.77e+01  at node V2:p  harm=(4 0)
Resd Norm=1.04e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0354e+09 Hz, delta f= -8.15e+05

********** iter = 12 **********
Damping Factor is 0.1 
Delta Norm=1.24e+02  at node V2:p  harm=(4 0)
Resd Norm=1.21e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0369e+09 Hz, delta f= 1.48e+06

********** iter = 13 **********
Damping Factor is 0.2 
Delta Norm=4.89e+01  at node V2:p  harm=(4 0)
Resd Norm=1.17e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0362e+09 Hz, delta f= -6.54e+05

********** iter = 14 **********
Delta Norm=1.13e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.45e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0362e+09 Hz, delta f= 7.17e+03

********** iter = 15 **********
Delta Norm=1.24e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.12e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0368e+09 Hz, delta f= 5.25e+05

********** iter = 16 **********
Damping Factor is 0.1 
Delta Norm=6.90e+01  at node V2:p  harm=(4 0)
Resd Norm=1.11e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0361e+09 Hz, delta f= -6.77e+05

********** iter = 17 **********
Damping Factor is 0.1 
Delta Norm=2.25e+02  at node V2:p  harm=(4 0)
Resd Norm=2.23e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0385e+09 Hz, delta f= 2.44e+06

********** iter = 18 **********
Delta Norm=4.46e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.67e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0376e+09 Hz, delta f= -9.40e+05

********** iter = 19 **********
Damping Factor is 0.2 
Delta Norm=7.07e+01  at node V2:p  harm=(4 0)
Resd Norm=1.43e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0371e+09 Hz, delta f= -4.80e+05

********** iter = 20 **********
Damping Factor is 0.1 
Delta Norm=7.39e+01  at node V2:p  harm=(4 0)
Resd Norm=1.41e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0364e+09 Hz, delta f= -7.39e+05

********** iter = 21 **********
Damping Factor is 0.1 
Delta Norm=2.93e+02  at node V2:p  harm=(4 0)
Resd Norm=3.78e+02  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0399e+09 Hz, delta f= 3.53e+06

********** iter = 22 **********
Delta Norm=2.44e+02  at node V2:p  harm=(4 0)
Resd Norm=3.28e+02  at node I19.M3:int_g  harm=(10 0)
Frequency= 3.0372e+09 Hz, delta f= -2.69e+06

********** iter = 23 **********
Delta Norm=8.88e+01  at node V2:p  harm=(4 0)
Resd Norm=6.57e+01  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0372e+09 Hz, delta f= 1.11e+04

********** iter = 24 **********
Damping Factor is 0.1 
Delta Norm=4.37e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=6.54e+01  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0369e+09 Hz, delta f= -3.62e+05

********** iter = 25 **********
Damping Factor is 0.1 
Delta Norm=8.28e+01  at node V2:p  harm=(4 0)
Resd Norm=8.26e+01  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0361e+09 Hz, delta f= -7.83e+05

********** iter = 26 **********
Damping Factor is 0.1 
Delta Norm=2.30e+02  at node V2:p  harm=(4 0)
Resd Norm=2.23e+02  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0386e+09 Hz, delta f= 2.56e+06

********** iter = 27 **********
Delta Norm=8.42e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.16e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0364e+09 Hz, delta f= -2.27e+06

********** iter = 28 **********
Damping Factor is 0.1 
Delta Norm=3.18e+01  at node V2:p  harm=(4 0)
Resd Norm=1.07e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0362e+09 Hz, delta f= -1.74e+05

********** iter = 29 **********
Damping Factor is 0.1 
Delta Norm=3.93e+01  at node V2:p  harm=(4 0)
Resd Norm=1.01e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0359e+09 Hz, delta f= -2.97e+05

********** iter = 30 **********
Damping Factor is 0.1 
Delta Norm=7.48e+01  at node V2:p  harm=(4 0)
Resd Norm=1.10e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0351e+09 Hz, delta f= -7.68e+05

********** iter = 31 **********
Damping Factor is 0.1 
Delta Norm=9.39e+01  at node V2:p  harm=(4 0)
Resd Norm=1.32e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0364e+09 Hz, delta f= 1.28e+06

********** iter = 32 **********
Delta Norm=6.16e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.13e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0362e+09 Hz, delta f= -1.69e+05

********** iter = 33 **********
Damping Factor is 0.1 
Delta Norm=2.83e+01  at node V2:p  harm=(4 0)
Resd Norm=1.04e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0361e+09 Hz, delta f= -1.11e+05

********** iter = 34 **********
Damping Factor is 0.1 
Delta Norm=5.03e+01  at node V2:p  harm=(4 0)
Resd Norm=9.93e+01  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0358e+09 Hz, delta f= -3.49e+05

********** iter = 35 **********
Damping Factor is 0.1 
Delta Norm=1.10e+02  at node V2:p  harm=(4 0)
Resd Norm=1.19e+02  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0347e+09 Hz, delta f= -1.03e+06

********** iter = 36 **********
Damping Factor is 0.1 
Delta Norm=1.06e+02  at node V2:p  harm=(4 0)
Resd Norm=1.42e+02  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0361e+09 Hz, delta f= 1.38e+06

********** iter = 37 **********
Damping Factor is 0.1 
Delta Norm=6.66e+01  at node V2:p  harm=(4 0)
Resd Norm=1.47e+02  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0354e+09 Hz, delta f= -7.71e+05

********** iter = 38 **********
Delta Norm=4.34e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=9.98e+01  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0353e+09 Hz, delta f= -3.41e+04

********** iter = 39 **********
Damping Factor is 0.1 
Delta Norm=2.81e+02  at node V2:p  harm=(4 0)
Resd Norm=3.77e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0325e+09 Hz, delta f= -2.85e+06

********** iter = 40 **********
Delta Norm=2.45e+02  at node V2:p  harm=(4 0)
Resd Norm=2.79e+02  at node I20.M0:int_d  harm=(10 0)
Frequency= 3.0344e+09 Hz, delta f= 1.88e+06

********** iter = 41 **********
Damping Factor is 0.1 
Delta Norm=1.04e+02  at node V2:p  harm=(4 0)
Resd Norm=2.85e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0358e+09 Hz, delta f= 1.49e+06

********** iter = 42 **********
Damping Factor is 0.2 
Delta Norm=9.93e+01  at node V2:p  harm=(4 0)
Resd Norm=2.66e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0348e+09 Hz, delta f= -1.09e+06

********** iter = 43 **********
Damping Factor is 0.1 
Delta Norm=8.82e+01  at node V2:p  harm=(4 0)
Resd Norm=2.68e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0361e+09 Hz, delta f= 1.32e+06

********** iter = 44 **********
Delta Norm=9.73e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.94e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0339e+09 Hz, delta f= -2.17e+06

********** iter = 45 **********
Damping Factor is 0.1 
Delta Norm=2.91e+02  at node V2:p  harm=(4 0)
Resd Norm=4.00e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0379e+09 Hz, delta f= 4.00e+06

********** iter = 46 **********
Delta Norm=2.83e+02  at node V2:p  harm=(4 0)
Resd Norm=3.25e+02  at node I20.M0:int_d  harm=(4 0)
Frequency= 3.0355e+09 Hz, delta f= -2.40e+06

********** iter = 47 **********
Delta Norm=9.05e+01  at node V2:p  harm=(4 0)
Resd Norm=9.97e+01  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0367e+09 Hz, delta f= 1.21e+06

********** iter = 48 **********
Damping Factor is 0.1 
Delta Norm=1.27e+02  at node V2:p  harm=(4 0)
Resd Norm=1.28e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0355e+09 Hz, delta f= -1.24e+06

********** iter = 49 **********
Damping Factor is 0.1 
Delta Norm=1.05e+02  at node V2:p  harm=(4 0)
Resd Norm=1.49e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0366e+09 Hz, delta f= 1.16e+06

********** iter = 50 **********
Damping Factor is 0.1 
Delta Norm=1.96e+02  at node V2:p  harm=(4 0)
Resd Norm=2.45e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0389e+09 Hz, delta f= 2.22e+06

********** iter = 51 **********
Delta Norm=9.55e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.37e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0364e+09 Hz, delta f= -2.48e+06

********** iter = 52 **********
Damping Factor is 0.2 
Delta Norm=6.12e+01  at node V2:p  harm=(4 0)
Resd Norm=1.22e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0360e+09 Hz, delta f= -3.90e+05

********** iter = 53 **********
Damping Factor is 0.1 
Delta Norm=6.47e+01  at node V2:p  harm=(4 0)
Resd Norm=1.24e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0353e+09 Hz, delta f= -6.63e+05

********** iter = 54 **********
Damping Factor is 0.1 
Delta Norm=9.46e+01  at node V2:p  harm=(4 0)
Resd Norm=1.46e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0366e+09 Hz, delta f= 1.26e+06

********** iter = 55 **********
Damping Factor is 0.1 
Delta Norm=3.68e+01  at node V2:p  harm=(4 0)
Resd Norm=1.37e+02  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0362e+09 Hz, delta f= -3.59e+05

********** iter = 56 **********
Delta Norm=6.67e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.12e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0361e+09 Hz, delta f= -1.49e+05

********** iter = 57 **********
Damping Factor is 0.1 
Delta Norm=3.04e+01  at node V2:p  harm=(4 0)
Resd Norm=1.05e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0359e+09 Hz, delta f= -1.46e+05

********** iter = 58 **********
Damping Factor is 0.1 
Delta Norm=6.39e+01  at node V2:p  harm=(4 0)
Resd Norm=1.03e+02  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0354e+09 Hz, delta f= -5.06e+05

********** iter = 59 **********

Warning from spectre during Harmonic Balance Steady State Analysis `hb'.
    WARNING (CMI-2682): I19.M4: The bulk-drain junction forward bias voltage (979.257 mV) exceeds `VjdmFwd' = 941.396 mV.  The results are now incorrect because the junction current model has been linearized
Notice from spectre during Harmonic Balance Steady State Analysis `hb'.
    I19.M4: The bulk-drain junction returns to normal bias condition
Warning from spectre during Harmonic Balance Steady State Analysis `hb'.
    WARNING (CMI-2682): I19.M4: The bulk-drain junction forward bias voltage (979.239 mV) exceeds `VjdmFwd' = 941.396 mV.  The results are now incorrect because the junction current model has been linearized
Notice from spectre during Harmonic Balance Steady State Analysis `hb'.
    I19.M4: The bulk-drain junction returns to normal bias condition

Damping Factor is 0.1 
Delta Norm=4.79e+02  at node V2:p  harm=(4 0)
Resd Norm=1.14e+03  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0303e+09 Hz, delta f= -5.14e+06

********** iter = 60 **********
Delta Norm=2.68e+02  at node I19.V1:p  harm=(8 0)
Resd Norm=3.73e+02  at node I20.M0:int_g  harm=(6 0)
Frequency= 3.0314e+09 Hz, delta f= 1.09e+06

********** iter = 61 **********
Delta Norm=1.30e+02  at node I19.V1:p  harm=(8 0)
Resd Norm=9.23e+01  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0354e+09 Hz, delta f= 3.98e+06

********** iter = 62 **********
Delta Norm=1.21e+02  at node I19.V1:p  harm=(8 0)
Resd Norm=8.35e+01  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0345e+09 Hz, delta f= -8.24e+05

********** iter = 63 **********
Delta Norm=1.91e+01  at node I20.net020  harm=(6 0)
Resd Norm=8.89e+00  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0344e+09 Hz, delta f= -9.45e+04

********** iter = 64 **********
Damping Factor is 0.4407 
Delta Norm=3.13e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=6.72e+00  at node I19.M3:int_g  harm=(10 0)
Frequency= 3.0347e+09 Hz, delta f= 2.65e+05

********** iter = 65 **********
Damping Factor is 0.334 
Delta Norm=2.46e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=6.11e+00  at node I19.M3:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= 1.32e+05

********** iter = 66 **********
Damping Factor is 0.182 
Delta Norm=1.81e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.87e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= 5.98e+04

********** iter = 67 **********
Damping Factor is 0.07578 
Delta Norm=1.13e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.79e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= 2.07e+04

********** iter = 68 **********
Damping Factor is 0.06594 
Delta Norm=1.04e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.83e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= 1.54e+04

********** iter = 69 **********
Damping Factor is 0.1894 
Delta Norm=1.79e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.84e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= -1.66e+04

********** iter = 70 **********
Damping Factor is 0.08509 
Delta Norm=1.20e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.80e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= 1.80e+04

********** iter = 71 **********
Damping Factor is 0.08699 
Delta Norm=1.17e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.84e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= -1.47e+04

********** iter = 72 **********
Damping Factor is 0.09907 
Delta Norm=1.29e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.80e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= 1.87e+04

********** iter = 73 **********
Damping Factor is 0.2083 
Delta Norm=1.86e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.93e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= -2.27e+04

********** iter = 74 **********
Damping Factor is 0.1848 
Delta Norm=1.78e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.94e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 2.77e+04

********** iter = 75 **********
Damping Factor is 0.1 
Delta Norm=4.86e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.25e+01  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= -6.13e+04

********** iter = 76 **********
Delta Norm=4.64e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.34e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= -1.17e+05

********** iter = 77 **********
Damping Factor is 0.1592 
Delta Norm=1.24e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.05e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= 5.91e+04

********** iter = 78 **********
Damping Factor is 0.1013 
Delta Norm=9.59e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=2.88e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= 3.72e+04

********** iter = 79 **********
Damping Factor is 0.05445 
Delta Norm=6.84e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=2.79e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= 2.14e+04

********** iter = 80 **********
Damping Factor is 0.02984 
Delta Norm=4.90e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=2.74e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= 1.27e+04

********** iter = 81 **********
Damping Factor is 0.1 
Delta Norm=2.30e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.85e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 5.14e+04

********** iter = 82 **********
Delta Norm=2.05e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.64e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -4.10e+04

********** iter = 83 **********
Damping Factor is 0.1 
Delta Norm=3.95e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=7.87e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0350e+09 Hz, delta f= 7.82e+04

********** iter = 84 **********
Damping Factor is 0.3935 
Delta Norm=3.04e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=7.84e+00  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0350e+09 Hz, delta f= 2.23e+04

********** iter = 85 **********
Damping Factor is 0.1 
Delta Norm=2.92e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=9.60e+00  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0350e+09 Hz, delta f= -4.41e+04

********** iter = 86 **********
Delta Norm=1.00e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.02e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -7.80e+04

********** iter = 87 **********
Damping Factor is 0.03891 
Delta Norm=5.86e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=2.96e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= 1.63e+04

********** iter = 88 **********
Damping Factor is 0.1 
Delta Norm=2.21e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.58e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0350e+09 Hz, delta f= 5.19e+04

********** iter = 89 **********
Damping Factor is 0.1 
Delta Norm=2.27e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.58e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= -1.86e+04

********** iter = 90 **********
Damping Factor is 0.1023 
Delta Norm=1.16e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.56e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0350e+09 Hz, delta f= 1.84e+04

********** iter = 91 **********
Damping Factor is 0.1 
Delta Norm=4.26e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=9.64e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= -6.50e+04

********** iter = 92 **********
Delta Norm=2.82e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=5.08e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= -7.84e+04

********** iter = 93 **********
Damping Factor is 0.2674 
Delta Norm=1.99e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.35e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= 8.25e+04

********** iter = 94 **********
Damping Factor is 0.1077 
Delta Norm=1.18e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.09e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= 3.48e+04

********** iter = 95 **********
Damping Factor is 0.1 
Delta Norm=2.27e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.07e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0350e+09 Hz, delta f= 4.96e+04

********** iter = 96 **********
Damping Factor is 0.1147 
Delta Norm=1.27e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.97e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0350e+09 Hz, delta f= -8.65e+03

********** iter = 97 **********
Damping Factor is 0.1 
Delta Norm=2.99e+02  at node I19.V1:p  harm=(8 0)
Resd Norm=3.72e+02  at node I20.M0:int_d  harm=(4 0)
Frequency= 3.0345e+09 Hz, delta f= -4.56e+05

********** iter = 98 **********
Delta Norm=7.36e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=1.38e+02  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0361e+09 Hz, delta f= 1.59e+06

********** iter = 99 **********
Delta Norm=6.84e+01  at node V2:p  harm=(4 0)
Resd Norm=4.99e+01  at node I20.M0:int_d  harm=(10 0)
Frequency= 3.0340e+09 Hz, delta f= -2.08e+06

********** iter = 100 **********
Delta Norm=9.79e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.52e+01  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0348e+09 Hz, delta f= 7.73e+05
Pinning node: 142, harm: 1, name: M4:int_d, value: (0.115743, 0.134403)

==============================
     Harmonic balance
  hbhomotopy=tone (all-tone)
==============================
Important HB parameters:
    RelTol=1.00e-04
    abstol(I)=1.00e-12 A
    abstol(V)=1.00e-06 V
    residualtol=1.00e+00
    lteratio=3.50e+00
    steadyratio=1.00e+00
    maxperiods=100


********** initial residual **********
Resd Norm=4.52e+01  at node I20.M0:int_d  harm=(8 0)

********** iter = 1 **********
Delta Norm=1.15e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.32e+01  at node I20.M0:int_d  harm=(4 0)
Frequency= 3.0348e+09 Hz, delta f= -1.36e+04

********** iter = 2 **********
Delta Norm=4.06e+00  at node I19.V1:p  harm=(4 0)
Resd Norm=2.87e+01  at node I20.M0:int_d  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= 1.19e+04

********** iter = 3 **********
Delta Norm=3.22e+00  at node I19.V1:p  harm=(4 0)
Resd Norm=2.72e+01  at node I20.M0:int_d  harm=(10 0)
Frequency= 3.0347e+09 Hz, delta f= -9.62e+04

********** iter = 4 **********
Delta Norm=5.35e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=1.64e+01  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0348e+09 Hz, delta f= 6.89e+04

********** iter = 5 **********
Delta Norm=2.94e+00  at node V2:p  harm=(4 0)
Resd Norm=1.41e+01  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0350e+09 Hz, delta f= 2.30e+05

********** iter = 6 **********
Delta Norm=1.21e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=8.87e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0347e+09 Hz, delta f= -2.94e+05

********** iter = 7 **********
Delta Norm=6.16e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=7.35e+00  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0345e+09 Hz, delta f= -1.74e+05

********** iter = 8 **********
Delta Norm=2.21e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=6.89e+00  at node I20.M0:int_g  harm=(8 0)
Frequency= 3.0347e+09 Hz, delta f= 1.53e+05

********** iter = 9 **********
Delta Norm=1.15e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.97e+00  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0347e+09 Hz, delta f= 3.78e+04

********** iter = 10 **********
Damping Factor is 0.8841 
Delta Norm=2.96e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=6.38e+00  at node I20.M0:int_g  harm=(6 0)
Frequency= 3.0349e+09 Hz, delta f= 2.12e+05

********** iter = 11 **********
Delta Norm=8.78e-01  at node C3.ls:1  harm=(1 0)
Resd Norm=5.42e+00  at node I20.M0:int_g  harm=(6 0)
Frequency= 3.0349e+09 Hz, delta f= 9.89e+01

********** iter = 12 **********
Delta Norm=7.50e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=5.42e+00  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0349e+09 Hz, delta f= -4.90e+04

********** iter = 13 **********
Damping Factor is 0.627 
Delta Norm=2.73e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.81e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 4.74e+04

********** iter = 14 **********
Delta Norm=7.45e-01  at node V2:p  harm=(2 0)
Resd Norm=4.30e+00  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0349e+09 Hz, delta f= 2.14e+04

********** iter = 15 **********
Delta Norm=1.33e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.49e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= -8.20e+04

********** iter = 16 **********
Delta Norm=1.74e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.21e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= -2.60e+03

********** iter = 17 **********
Delta Norm=1.32e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.14e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0348e+09 Hz, delta f= -2.20e+04

********** iter = 18 **********
Damping Factor is 0.2352 
Delta Norm=1.36e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.61e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 4.06e+04

********** iter = 19 **********
Damping Factor is 0.2395 
Delta Norm=1.57e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.02e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0348e+09 Hz, delta f= -2.93e+04

********** iter = 20 **********
Delta Norm=1.57e+00  at node V2:p  harm=(4 0)
Resd Norm=3.10e+00  at node I20.M7:int_g  harm=(0 0)
Frequency= 3.0348e+09 Hz, delta f= -2.05e+04

********** iter = 21 **********
Damping Factor is 0.2093 
Delta Norm=1.28e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.45e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 4.00e+04

********** iter = 22 **********
Damping Factor is 0.2269 
Delta Norm=1.49e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.87e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0348e+09 Hz, delta f= -2.88e+04

********** iter = 23 **********
Delta Norm=1.16e+00  at node V2:p  harm=(4 0)
Resd Norm=3.08e+00  at node I20.M7:int_g  harm=(0 0)
Frequency= 3.0348e+09 Hz, delta f= -1.06e+04

********** iter = 24 **********
Damping Factor is 0.1879 
Delta Norm=1.23e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.33e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 4.11e+04

********** iter = 25 **********
Damping Factor is 0.7168 
Delta Norm=2.01e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.79e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0348e+09 Hz, delta f= -3.11e+04

********** iter = 26 **********
Delta Norm=5.04e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.30e+00  at node I20.M7:int_g  harm=(0 0)
Frequency= 3.0348e+09 Hz, delta f= -2.17e+04

********** iter = 27 **********
Delta Norm=2.22e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.52e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 8.87e+04

********** iter = 28 **********
Delta Norm=8.90e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=2.59e+00  at node I20.M0:int_d  harm=(2 0)
Frequency= 3.0349e+09 Hz, delta f= -1.35e+04

********** iter = 29 **********
Damping Factor is 0.05813 
Delta Norm=6.50e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=2.59e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= -1.36e+04

********** iter = 30 **********
Damping Factor is 0.0793 
Delta Norm=7.52e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=2.79e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 1.86e+04

********** iter = 31 **********
Damping Factor is 0.3422 
Delta Norm=1.54e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.23e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= -3.53e+04

********** iter = 32 **********
Delta Norm=1.57e+00  at node V2:p  harm=(4 0)
Resd Norm=3.05e+00  at node I20.M5:int_g  harm=(5 0)
Frequency= 3.0348e+09 Hz, delta f= -1.57e+04

********** iter = 33 **********
Damping Factor is 0.175 
Delta Norm=1.19e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=2.86e+00  at node I20.M5:int_g  harm=(5 0)
Frequency= 3.0349e+09 Hz, delta f= 3.80e+04

********** iter = 34 **********
Damping Factor is 0.1 
Delta Norm=2.53e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.41e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0348e+09 Hz, delta f= -5.72e+04

********** iter = 35 **********
Delta Norm=6.18e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.17e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= 1.13e+04

********** iter = 36 **********
Delta Norm=1.19e+00  at node V2:p  harm=(4 0)
Resd Norm=3.20e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= -5.59e+04

********** iter = 37 **********
Delta Norm=1.68e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.43e+00  at node I20.M7:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 8.51e+04

********** iter = 38 **********
Delta Norm=2.06e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.50e+00  at node I20.M7:int_g  harm=(4 0)
Frequency= 3.0348e+09 Hz, delta f= -2.49e+04

********** iter = 39 **********
Damping Factor is 0.09926 
Delta Norm=9.88e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.43e+00  at node I20.M7:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 3.01e+04

********** iter = 40 **********
Damping Factor is 0.1056 
Delta Norm=1.02e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.45e+00  at node I20.M7:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= -2.17e+04

********** iter = 41 **********
Damping Factor is 0.2448 
Delta Norm=1.47e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.43e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 4.14e+04

********** iter = 42 **********
Delta Norm=7.90e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.52e+00  at node I20.M7:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= -2.21e+04

********** iter = 43 **********
Damping Factor is 0.3068 
Delta Norm=1.74e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.29e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0348e+09 Hz, delta f= -2.23e+04

********** iter = 44 **********
Delta Norm=2.36e+00  at node V2:p  harm=(4 0)
Resd Norm=3.23e+00  at node I20.M5:int_g  harm=(0 0)
Frequency= 3.0348e+09 Hz, delta f= -1.61e+03

********** iter = 45 **********
Damping Factor is 0.1553 
Delta Norm=1.17e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.12e+00  at node I20.M5:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= 3.62e+04

********** iter = 46 **********
Damping Factor is 0.1518 
Delta Norm=1.17e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.19e+00  at node I20.M5:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= -2.43e+04

********** iter = 47 **********
Damping Factor is 0.8965 
Delta Norm=3.27e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.52e+00  at node I20.M5:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= -2.96e+03

********** iter = 48 **********
Damping Factor is 0.1486 
Delta Norm=1.19e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.68e+00  at node I20.M5:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= 3.32e+04

********** iter = 49 **********
Damping Factor is 0.2678 
Delta Norm=1.70e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.39e+00  at node I20.M5:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= -3.03e+04

********** iter = 50 **********
Delta Norm=3.99e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.73e+00  at node I20.M7:int_g  harm=(0 0)
Frequency= 3.0348e+09 Hz, delta f= -2.19e+04

********** iter = 51 **********
Damping Factor is 0.4495 
Delta Norm=1.96e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.43e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 6.25e+04

********** iter = 52 **********
Delta Norm=1.23e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.14e+00  at node I20.M5:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= -2.26e+04

********** iter = 53 **********
Damping Factor is 0.4742 
Delta Norm=1.90e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.59e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -1.81e+04

********** iter = 54 **********
Delta Norm=2.04e+00  at node V2:p  harm=(4 0)
Resd Norm=3.16e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= -2.11e+04

********** iter = 55 **********
Damping Factor is 0.637 
Delta Norm=1.90e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.27e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 6.42e+04

********** iter = 56 **********
Delta Norm=9.93e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=2.86e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -2.16e+04

********** iter = 57 **********
Damping Factor is 0.2153 
Delta Norm=1.34e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.15e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -1.47e+04

********** iter = 58 **********
Damping Factor is 0.2975 
Delta Norm=1.49e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.53e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 3.76e+04

********** iter = 59 **********
Delta Norm=4.23e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.13e+00  at node I20.M7:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= -2.10e+04

********** iter = 60 **********
Damping Factor is 0.3768 
Delta Norm=1.75e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.63e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -1.48e+04

********** iter = 61 **********
Delta Norm=1.49e+00  at node V2:p  harm=(4 0)
Resd Norm=3.34e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -1.47e+04

********** iter = 62 **********
Damping Factor is 0.3749 
Delta Norm=1.70e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.27e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 4.85e+04

********** iter = 63 **********
Delta Norm=9.49e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.20e+00  at node I20.M7:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= -1.77e+04

********** iter = 64 **********
Damping Factor is 0.2713 
Delta Norm=1.58e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.58e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -1.50e+04

********** iter = 65 **********
Delta Norm=6.19e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.01e+00  at node I20.M7:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= 8.93e+03

********** iter = 66 **********
Damping Factor is 0.1 
Delta Norm=2.58e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.32e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 6.32e+04

********** iter = 67 **********
Delta Norm=5.81e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.61e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0350e+09 Hz, delta f= 2.50e+04

********** iter = 68 **********
Delta Norm=2.38e+00  at node I19.V2:p  harm=(4 0)
Resd Norm=3.73e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -5.51e+04

********** iter = 69 **********
Damping Factor is 0.539 
Delta Norm=1.91e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.80e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= 2.94e+02

********** iter = 70 **********
Delta Norm=6.42e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.27e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -1.93e+04

********** iter = 71 **********
Damping Factor is 0.5722 
Delta Norm=2.46e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.54e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= -4.40e+04

********** iter = 72 **********
Damping Factor is 0.8576 
Delta Norm=6.01e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.19e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= 2.21e+04

********** iter = 73 **********
Delta Norm=6.80e+00  at node V2:p  harm=(4 0)
Resd Norm=3.77e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= -3.39e+04

********** iter = 74 **********
Delta Norm=1.60e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=2.93e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= 5.92e+04

********** iter = 75 **********
Delta Norm=2.66e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=2.67e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -2.07e+04

********** iter = 76 **********
Damping Factor is 0.1 
Delta Norm=3.04e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.97e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0350e+09 Hz, delta f= 7.69e+04

********** iter = 77 **********
Delta Norm=1.27e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.98e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -7.24e+04

********** iter = 78 **********
Damping Factor is 0.8711 
Delta Norm=1.31e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=4.48e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0350e+09 Hz, delta f= 8.62e+04

********** iter = 79 **********
Delta Norm=1.19e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.57e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -5.27e+04

********** iter = 80 **********
Damping Factor is 0.8837 
Delta Norm=9.71e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=5.07e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -1.56e+04

********** iter = 81 **********
Delta Norm=2.10e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.33e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -3.51e+04

********** iter = 82 **********
Delta Norm=7.34e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.07e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= -1.50e+04

********** iter = 83 **********
Delta Norm=1.80e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=3.04e+00  at node I20.M5:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 7.12e+04

********** iter = 84 **********
Delta Norm=1.31e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.19e+00  at node I20.M7:int_g  harm=(5 0)
Frequency= 3.0349e+09 Hz, delta f= -1.87e+04

********** iter = 85 **********
Damping Factor is 0.09393 
Delta Norm=9.25e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.07e+00  at node I20.M7:int_g  harm=(5 0)
Frequency= 3.0349e+09 Hz, delta f= -1.87e+04

********** iter = 86 **********
Damping Factor is 0.05026 
Delta Norm=6.62e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.01e+00  at node I20.M7:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 1.79e+04

********** iter = 87 **********
Damping Factor is 0.1 
Delta Norm=3.01e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.79e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0348e+09 Hz, delta f= -6.96e+04

********** iter = 88 **********
Delta Norm=1.25e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=4.65e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= -5.48e+04

********** iter = 89 **********
Delta Norm=9.26e-01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.17e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= 2.17e+04

********** iter = 90 **********
Delta Norm=8.48e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=3.39e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0348e+09 Hz, delta f= 2.38e+04

********** iter = 91 **********
Delta Norm=1.54e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=2.99e+00  at node I20.M0:int_d  harm=(8 0)
Frequency= 3.0349e+09 Hz, delta f= 4.46e+04

********** iter = 92 **********
Delta Norm=2.04e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=2.96e+00  at node I20.M5:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= -9.81e+03

********** iter = 93 **********
Damping Factor is 0.04736 
Delta Norm=6.31e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=2.96e+00  at node I20.M5:int_g  harm=(5 0)
Frequency= 3.0349e+09 Hz, delta f= 1.85e+04

********** iter = 94 **********
Damping Factor is 0.1 
Delta Norm=2.51e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.20e+00  at node I20.M0:int_g  harm=(4 0)
Frequency= 3.0349e+09 Hz, delta f= 6.26e+04

********** iter = 95 **********
Delta Norm=6.58e-01  at node V2:p  harm=(2 0)
Resd Norm=3.73e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0350e+09 Hz, delta f= 3.83e+04

********** iter = 96 **********
Delta Norm=7.28e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=4.08e+00  at node I20.M5:int_g  harm=(0 0)
Frequency= 3.0349e+09 Hz, delta f= -7.78e+04

********** iter = 97 **********
Damping Factor is 0.757 
Delta Norm=1.84e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.61e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -3.96e+02

********** iter = 98 **********
Delta Norm=1.46e+00  at node V2:p  harm=(4 0)
Resd Norm=3.95e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -2.51e+04

********** iter = 99 **********
Damping Factor is 0.1 
Delta Norm=1.71e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=4.28e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= 4.23e+04

********** iter = 100 **********
Damping Factor is 0.8817 
Delta Norm=6.08e+00  at node I19.V1:p  harm=(8 0)
Resd Norm=4.77e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -1.40e+04

Notice from spectre during Harmonic Balance Steady State Analysis `hb'.
    Residual norm is close to convergence, try more iterations...


********** iter = 101 **********
Damping Factor is 0.5793 

Warning from spectre during Harmonic Balance Steady State Analysis `hb'.
    WARNING: Newton stagnates, but the norm is very close to the desired tolerance. The solution is considered converged.

Delta Norm=2.71e+01  at node I19.V1:p  harm=(8 0)
Resd Norm=5.27e+00  at node I20.M0:int_g  harm=(10 0)
Frequency= 3.0349e+09 Hz, delta f= -3.57e+04


*************************************************
Fundamental frequency is 3.03486 GHz.
*************************************************

CPU time=43 s


Opening the PSF file ../psf/hb.fd.qpss_hb ...

Opening the PSF file ../psf/hb.fi.qpss_hb ...
Total time required for hb analysis `hb': CPU = 47.9787 s, elapsed = 48.0925 s.
Time accumulated: CPU = 48.3087 s, elapsed = 48.6191 s.
Peak resident memory used = 87 Mbytes.

modelParameter: writing model parameter values to rawfile.

Opening the PSF file ../psf/modelParameter.info ...
element: writing instance parameter values to rawfile.

Opening the PSF file ../psf/element.info ...
outputParameter: writing output parameter values to rawfile.

Opening the PSF file ../psf/outputParameter.info ...
designParamVals: writing netlist parameters to rawfile.

Opening the PSFASCII file ../psf/designParamVals.info ...
primitives: writing primitives to rawfile.

Opening the PSFASCII file ../psf/primitives.info.primitives ...
subckts: writing subcircuits to rawfile.

Opening the PSFASCII file ../psf/subckts.info.subckts ...

 
Cadence (R) Virtuoso (R) Spectre (R) Circuit Simulator
Version 15.1.0.801.isr17 64bit -- 19 Apr 2017
Copyright (C) 1989-2017 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Virtuoso and Spectre are registered trademarks of Cadence Design Systems, Inc. All others are the property of their respective holders.

Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA Security, Inc.

User: yafimv   Host: micron.eng.tau.ac.il   HostID: 428454C2   PID: 2954
Memory  available: 17.3392 GB  physical: 33.6702 GB
Linux   : Red Hat Enterprise Linux Server release 6.9 (Santiago)
CPU Type: Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
        Socket: Processors [Frequency]
        0:       0 [2499.0],  2 [1998.0],  4 [1998.0],  6 [1998.0]
        1:       1 [1998.0],  3 [1998.0],  5 [1998.0],  7 [1998.0]
        
System load averages (1min, 5min, 15min) : 7.9 %, 7.0 %, 4.9 %


Simulating `input.scs' on micron.eng.tau.ac.il at 3:58:39 PM, Mon Feb 25, 2019 (process id: 2954).
Current working directory: /data.cc/data/a/home/cc/students/enginer/yafimv/simulation/ex5_mixerr_3_33_interfer2/spectre/schematic/netlist
Command line:
    /eda_disk/cadence/tools/MMSIM/151/tools/bin/spectre -64 input.scs  \
        +escchars +log ../psf/spectre.out +inter=mpsc  \
        +mpssession=spectre0_13383_14 -format psfxl -raw ../psf  \
        +lqtimeout 900 -maxw 5 -maxn 5
spectre pid = 2954

Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libinfineon_sh.so ...
Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libphilips_o_sh.so ...
Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libphilips_sh.so ...
Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libsparam_sh.so ...
Loading /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/cmi/lib/64bit/5.0/libstmodels_sh.so ...
Reading file:  /data.cc/data/a/home/cc/students/enginer/yafimv/simulation/ex5_mixerr_3_33_interfer2/spectre/schematic/netlist/input.scs
Reading file:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/configs/spectre.cfg
Reading file:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/configs/mapsubckt.cfg
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_NVT_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_NVT_V021.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_V111.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_V111.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_NCAP25_V113.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_NCAP25_V113.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_25_rf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_25_rf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_33IO_GOX52_VT21.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_33IO_GOX52_VT21.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_RF_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_25IO_RF_V021.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90-resistor-control-V041.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_res.va
Reading link:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/ahdl/constants.h
Reading file:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/ahdl/constants.vams
Reading link:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/ahdl/discipline.h
Reading file:  /eda_disk/cadence/tools/MMSIM/151/tools.lnx86/spectre/etc/ahdl/disciplines.vams
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_ppo_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_ppo_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_npo_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_npo_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_rnhr_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_rnhr_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_rsnwell_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_rsnwell_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_nd_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_nd_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_pd_V031.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_pd_V031.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_metal_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_r_metal_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_BJT_V111.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_BJT_V111.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_DIODE_V101.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LL12_RF_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LL12_RF_V021.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLLVT12_RF_VTAB.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLLVT12_RF_VTAB.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LL12_V102.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LL12_V102.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLHVT12_V101.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLHVT12_V101.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLLVT12_V102.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLLVT12_V102.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLNVT12_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_LLNVT12_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90SP_NCAP10_V112.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90SP_NCAP10_V112.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_NCAP12_LL_V102.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_NCAP12_LL_V102.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SP10_V061.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SP10_V061.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPHVT10_V111.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPHVT10_V111.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPLVT10_V102.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPLVT10_V102.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPNVT10_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SPNVT10_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_mimcaps_20f_kf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_mimcaps_20f_kf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_momcaps_V041.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_momcaps_V041.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_vardiop_rf_v011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_vardiop_rf_v011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_12_llrf_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_12_llrf_V021.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/momcaps_array_vp3_rfvcl_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/momcaps_array_vp3_rfvcl_V011.typ.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/momcaps_array_vp4_rfvcl_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/momcaps_array_vp4_rfvcl_V011.typ.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnhr_rf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnhr_rf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/res_poly.va
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnnpo_rf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnnpo_rf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnppo_rf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/rnppo_rf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_10_sprf_V011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_varmis_10_sprf_V011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/bond_pad_v011.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/bond_pad_v011.mdl.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SP10_RF_V021.lib.scs
Reading file:  /eda_disk/pdks/UMC/UMC90nm/Models/Spectre/L90_SP10_RF_V021.mdl.scs
Time for NDB Parsing: CPU = 201.969 ms, elapsed = 343.811 ms.
Time accumulated: CPU = 234.963 ms, elapsed = 343.82 ms.
Peak resident memory used = 45.5 Mbytes.


The CPU load for active processors is :
        Spectre  0 (82.4 %)      1 (2.9 %)       2 (17.1 %)      4 (15.2 %)
                 5 (5.9 %)       6 (11.4 %)      7 (5.9 %)      
        Other   

Warning from spectre during circuit read-in.
    WARNING (SFE-2654): VerilogA module `respoly_va' override primitive/(verilogA module) `respoly_va'.
    WARNING (SFE-2654): VerilogA module `respoly_va' override primitive/(verilogA module) `respoly_va'.
Warning from spectre during hierarchy flattening.
    WARNING (SFE-1131): Duplicate scope option `tnom' with scope `TopCircuit'. (using last value specified).

Time for Elaboration: CPU = 75.989 ms, elapsed = 76.1001 ms.
Time accumulated: CPU = 310.952 ms, elapsed = 420.2 ms.
Peak resident memory used = 54 Mbytes.

Time for EDB Visiting: CPU = 2.999 ms, elapsed = 3.07012 ms.
Time accumulated: CPU = 313.951 ms, elapsed = 423.639 ms.
Peak resident memory used = 54.8 Mbytes.


Notice from spectre during topology check.
    No DC path from node `I20.M7:int_g' to ground, Gmin installed to provide path.
    No DC path from node `I20.M5:int_g' to ground, Gmin installed to provide path.
    No DC path from node `RF' to ground, Gmin installed to provide path.
    No DC path from node `M0:int_g' to ground, Gmin installed to provide path.


Global user options:
             reltol = 0.001
            vabstol = 1e-06
            iabstol = 1e-12
               temp = 27
               gmin = 1e-12
             rforce = 1
           maxnotes = 5
           maxwarns = 5
             digits = 5
               cols = 80
             pivrel = 0.001
           sensfile = ../psf/sens.output
     checklimitdest = psf
               save = allpub
               tnom = 25
               tnom = 27
             scalem = 1
              scale = 1

Scoped user options:

Circuit inventory:
              nodes 56
              bsim4 14    
          capacitor 85    
              diode 4     
           inductor 14    
           resistor 35    
            vsource 8     

Analysis and control statement inventory:
               info 6     
                pss 1     

Output statements:
             .probe 0     
           .measure 0     
               save 0     

Time for parsing: CPU = 4.999 ms, elapsed = 6.17981 ms.
Time accumulated: CPU = 318.95 ms, elapsed = 430.168 ms.
Peak resident memory used = 56.3 Mbytes.

~~~~~~~~~~~~~~~~~~~~~~
Pre-Simulation Summary
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~
Entering remote command mode using MPSC service (spectre, ipi, v0.0, spectre0_13383_14, ).

Warning from spectre.
    WARNING (SPECTRE-16707): Only tran supports psfxl format, result of other analyses will be in psfbin format.


**************************************************************
Periodic Steady-State Analysis `pss': estimated fund = 3.3 GHz
**************************************************************
Trying `homotopy = gmin'.

Notice from spectre during DC analysis, during periodic steady state analysis `pss'.
    GminDC = 1 pS is large enough to noticeably affect the DC solution.
        dV(net026) = -54.9448 mV
        Use the `gmin_check' option to eliminate or expand this report.
    Bad pivoting is found during DC analysis. Option dc_pivot_check=yes is recommended for possible improvement of convergence.

DC simulation time: CPU = 28.996 ms, elapsed = 28.7771 ms.

Using linear IC
Linear IC: estimated frequency is 2.76904e+09 Hz

Opening the PSF file ../psf/pss.tran.pss ...

=================================
`pss': time = (0 s -> 101.806 ns)
=================================

Output and IC/nodeset summary:
                 save   22      (current)
                 save   56      (voltage)
                 ic     1       

Important parameter values in tstab integration:
    start = 0 s
    outputstart = 0 s
    stop = 101.806 ns
    period = 361.136 ps
    maxperiods = 50
    step = 100.303 ps
    maxstep = 12.1212 ps
    ic = all
    useprevic = no
    skipdc = no
    reltol = 1e-03
    abstol(V) = 1 uV
    abstol(I) = 1 pA
    temp = 27 C
    tnom = 27 C
    tempeffects = all
    method = traponly
    lteratio = 3.5
    relref = sigglobal
    cmin = 0 F
    gmin = 1 pS

    pss: time = 2.548 ns     (2.5 %), step = 6.06 ps     (5.95 m%)
    pss: time = 7.642 ns    (7.51 %), step = 6.827 ps    (6.71 m%)
    pss: time = 12.73 ns    (12.5 %), step = 5.523 ps    (5.43 m%)
    pss: time = 17.82 ns    (17.5 %), step = 7.86 ps     (7.72 m%)
    pss: time = 22.91 ns    (22.5 %), step = 5.192 ps     (5.1 m%)
    pss: time = 28 ns       (27.5 %), step = 7.053 ps    (6.93 m%)
    pss: time = 33.09 ns    (32.5 %), step = 5.214 ps    (5.12 m%)
    pss: time = 38.18 ns    (37.5 %), step = 7.485 ps    (7.35 m%)
    pss: time = 43.27 ns    (42.5 %), step = 4.793 ps    (4.71 m%)
    pss: time = 48.36 ns    (47.5 %), step = 6.6 ps      (6.48 m%)
    pss: time = 53.45 ns    (52.5 %), step = 5.841 ps    (5.74 m%)
    pss: time = 58.54 ns    (57.5 %), step = 6.297 ps    (6.19 m%)
    pss: time = 63.63 ns    (62.5 %), step = 7.348 ps    (7.22 m%)
    pss: time = 68.72 ns    (67.5 %), step = 6.119 ps    (6.01 m%)
    pss: time = 73.81 ns    (72.5 %), step = 7.85 ps     (7.71 m%)
    pss: time = 78.9 ns     (77.5 %), step = 4.905 ps    (4.82 m%)
    pss: time = 83.99 ns    (82.5 %), step = 7.106 ps    (6.98 m%)
    pss: time = 89.08 ns    (87.5 %), step = 5.258 ps    (5.16 m%)
    pss: time = 94.18 ns    (92.5 %), step = 8.618 ps    (8.47 m%)
    pss: time = 99.26 ns    (97.5 %), step = 5.754 ps    (5.65 m%)

Notice from spectre at time = 100.42 ns during periodic steady state analysis `pss'.
    Found trapezoidal ringing on node I19.M4:int_s.
Notice from spectre at time = 100.423 ns during periodic steady state analysis `pss'.
    Found trapezoidal ringing on node I19.M4:int_s.
Notice from spectre at time = 100.429 ns during periodic steady state analysis `pss'.
    Found trapezoidal ringing on node I19.M4:sbnode.
Notice from spectre at time = 100.445 ns during periodic steady state analysis `pss'.
    Found trapezoidal ringing on node I19.M4:sbnode.
Notice from spectre at time = 100.585 ns during periodic steady state analysis `pss'.
    Found trapezoidal ringing on node I19.M4:int_s.
        Further occurrences of this notice will be suppressed.

The Estimated oscillating frequency from Tstab Tran is = 3.02351 GHz . 

Tstab: runs at least 100 timesteps per cycle,     MaxStep=3.30741e-12

========================================
`pss': time = (101.806 ns -> 102.136 ns)
========================================

Output and IC/nodeset summary:
                 save   22      (current)
                 save   56      (voltage)
                 ic     1       

    pss: time = 101.8 ns    (3.04 %), step = 3.307 ps        (1 %)
    pss: time = 101.8 ns    (8.04 %), step = 3.307 ps        (1 %)
    pss: time = 101.8 ns      (13 %), step = 3.307 ps        (1 %)
    pss: time = 101.9 ns      (18 %), step = 3.307 ps        (1 %)
    pss: time = 101.9 ns      (23 %), step = 3.307 ps        (1 %)
    pss: time = 101.9 ns      (28 %), step = 3.307 ps        (1 %)
    pss: time = 101.9 ns      (33 %), step = 3.307 ps        (1 %)
    pss: time = 101.9 ns      (38 %), step = 3.307 ps        (1 %)
    pss: time = 101.9 ns      (43 %), step = 3.307 ps        (1 %)
    pss: time = 102 ns        (48 %), step = 3.307 ps        (1 %)
    pss: time = 102 ns        (53 %), step = 3.307 ps        (1 %)
    pss: time = 102 ns        (58 %), step = 3.307 ps        (1 %)
    pss: time = 102 ns        (63 %), step = 3.307 ps        (1 %)
    pss: time = 102 ns        (68 %), step = 3.307 ps        (1 %)
    pss: time = 102 ns        (73 %), step = 3.307 ps        (1 %)
    pss: time = 102.1 ns      (78 %), step = 3.307 ps        (1 %)
    pss: time = 102.1 ns      (83 %), step = 3.307 ps        (1 %)
    pss: time = 102.1 ns      (88 %), step = 3.307 ps        (1 %)
    pss: time = 102.1 ns      (93 %), step = 3.307 ps        (1 %)
    pss: time = 102.1 ns      (98 %), step = 3.307 ps        (1 %)
Total time required for tstab analysis `pss': CPU = 8.48371 s, elapsed = 8.60285 s.
Time accumulated: CPU = 8.82966 s, elapsed = 9.32776 s.
Peak resident memory used = 61.3 Mbytes.

Pinning node: 97, harm: 2, name: I19.M3:int_g, value: (-0.210003, -0.305484)

==============================
     Harmonic balance
==============================
Important HB parameters:
    RelTol=1.00e-05
    abstol(I)=1.00e-12 A
    abstol(V)=1.00e-06 V
    residualtol=1.00e+00
    lteratio=1.00e+01
    steadyratio=1.00e+00
    maxperiods=100


********** initial residual **********
Resd Norm=9.50e+03  at node I20.M0:int_g  harm=(14)

********** iter = 1 **********
Delta Norm=1.33e+03  at node I20.V3:p  harm=(0)
Resd Norm=1.56e+04  at node M0:int_d  harm=(2)
Frequency= 3.0281e+09 Hz, delta f= 4.63e+06

********** iter = 2 **********
Delta Norm=1.02e+03  at node I20.V3:p  harm=(2)
Resd Norm=1.94e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0334e+09 Hz, delta f= 5.21e+06

********** iter = 3 **********
Delta Norm=5.03e+02  at node V1:p  harm=(2)
Resd Norm=5.50e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0333e+09 Hz, delta f= -2.63e+04

********** iter = 4 **********
Delta Norm=4.51e+02  at node V1:p  harm=(2)
Resd Norm=3.59e+02  at node M4:int_g  harm=(5)
Frequency= 3.0337e+09 Hz, delta f= 3.56e+05

********** iter = 5 **********
Delta Norm=6.70e+02  at node V1:p  harm=(2)
Resd Norm=4.87e+02  at node M4:int_g  harm=(5)
Frequency= 3.0330e+09 Hz, delta f= -7.14e+05

********** iter = 6 **********
Delta Norm=6.54e+02  at node V1:p  harm=(2)
Resd Norm=5.94e+02  at node M3:int_g  harm=(5)
Frequency= 3.0336e+09 Hz, delta f= 6.43e+05

********** iter = 7 **********
Delta Norm=1.26e+02  at node V1:p  harm=(2)
Resd Norm=8.12e+01  at node M3:int_g  harm=(2)
Frequency= 3.0336e+09 Hz, delta f= -1.23e+04

********** iter = 8 **********
Damping Factor is 0.1 
Delta Norm=2.20e+02  at node V1:p  harm=(2)
Resd Norm=8.94e+01  at node M3:int_g  harm=(2)
Frequency= 3.0338e+09 Hz, delta f= 2.22e+05

********** iter = 9 **********
Damping Factor is 0.105 
Delta Norm=9.14e+01  at node V1:p  harm=(2)
Resd Norm=8.40e+01  at node M3:int_g  harm=(2)
Frequency= 3.0337e+09 Hz, delta f= -9.91e+04

********** iter = 10 **********
Damping Factor is 0.1 
Delta Norm=1.75e+02  at node V1:p  harm=(2)
Resd Norm=9.41e+01  at node M3:int_s  harm=(0)
Frequency= 3.0335e+09 Hz, delta f= -1.86e+05

********** iter = 11 **********
Damping Factor is 0.1 
Delta Norm=1.60e+02  at node V1:p  harm=(2)
Resd Norm=1.12e+02  at node M3:int_s  harm=(0)
Frequency= 3.0337e+09 Hz, delta f= 1.62e+05

********** iter = 12 **********
Damping Factor is 0.1 
Delta Norm=1.40e+02  at node V1:p  harm=(2)
Resd Norm=1.21e+02  at node M3:int_s  harm=(0)
Frequency= 3.0335e+09 Hz, delta f= -1.45e+05

********** iter = 13 **********
Damping Factor is 0.1 
Delta Norm=2.19e+02  at node V1:p  harm=(2)
Resd Norm=1.60e+02  at node M3:int_s  harm=(0)
Frequency= 3.0338e+09 Hz, delta f= 2.23e+05

********** iter = 14 **********
Damping Factor is 0.3814 
Delta Norm=2.42e+02  at node V1:p  harm=(2)
Resd Norm=1.61e+02  at node M4:int_s  harm=(0)
Frequency= 3.0335e+09 Hz, delta f= -2.62e+05

********** iter = 15 **********
Damping Factor is 0.1 
Delta Norm=1.82e+02  at node V1:p  harm=(2)
Resd Norm=1.80e+02  at node M3:int_s  harm=(0)
Frequency= 3.0337e+09 Hz, delta f= 1.86e+05

********** iter = 16 **********
Damping Factor is 0.4739 
Delta Norm=2.87e+02  at node V1:p  harm=(2)
Resd Norm=1.82e+02  at node M4:int_s  harm=(0)
Frequency= 3.0334e+09 Hz, delta f= -2.96e+05

********** iter = 17 **********
Damping Factor is 0.2338 
Delta Norm=1.76e+02  at node V1:p  harm=(2)
Resd Norm=1.73e+02  at node M4:int_s  harm=(0)
Frequency= 3.0336e+09 Hz, delta f= 1.90e+05

********** iter = 18 **********
Damping Factor is 0.1 
Delta Norm=2.32e+02  at node V1:p  harm=(2)
Resd Norm=2.17e+02  at node M3:int_g  harm=(5)
Frequency= 3.0334e+09 Hz, delta f= -2.32e+05

********** iter = 19 **********
Damping Factor is 0.1 
Delta Norm=1.02e+02  at node V1:p  harm=(2)
Resd Norm=2.05e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= 9.86e+04

********** iter = 20 **********
Damping Factor is 0.1 
Delta Norm=1.85e+02  at node V1:p  harm=(2)
Resd Norm=2.27e+02  at node M3:int_g  harm=(5)
Frequency= 3.0336e+09 Hz, delta f= 1.86e+05

********** iter = 21 **********
Damping Factor is 0.1 
Delta Norm=1.47e+02  at node V1:p  harm=(2)
Resd Norm=2.28e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= -1.52e+05

********** iter = 22 **********
Damping Factor is 0.1 
Delta Norm=3.85e+02  at node V1:p  harm=(2)
Resd Norm=3.88e+02  at node M3:int_g  harm=(5)
Frequency= 3.0339e+09 Hz, delta f= 3.88e+05

********** iter = 23 **********
Delta Norm=4.62e+02  at node V1:p  harm=(2)
Resd Norm=2.56e+02  at node M4:int_g  harm=(5)
Frequency= 3.0334e+09 Hz, delta f= -4.71e+05

********** iter = 24 **********
Damping Factor is 0.1 
Delta Norm=1.59e+02  at node V1:p  harm=(2)
Resd Norm=2.61e+02  at node M4:int_g  harm=(5)
Frequency= 3.0336e+09 Hz, delta f= 1.60e+05

********** iter = 25 **********
Damping Factor is 0.1 
Delta Norm=3.11e+02  at node V1:p  harm=(2)
Resd Norm=3.47e+02  at node M3:int_g  harm=(5)
Frequency= 3.0333e+09 Hz, delta f= -3.16e+05

********** iter = 26 **********
Damping Factor is 0.2 
Delta Norm=1.96e+02  at node V1:p  harm=(2)
Resd Norm=3.23e+02  at node M3:int_g  harm=(5)
Frequency= 3.0334e+09 Hz, delta f= 1.92e+05

********** iter = 27 **********
Damping Factor is 0.1 
Delta Norm=4.78e+02  at node V1:p  harm=(2)
Resd Norm=5.73e+02  at node M3:int_g  harm=(5)
Frequency= 3.0339e+09 Hz, delta f= 4.82e+05

********** iter = 28 **********
Delta Norm=3.86e+02  at node V1:p  harm=(2)
Resd Norm=1.95e+02  at node M3:int_g  harm=(5)
Frequency= 3.0336e+09 Hz, delta f= -3.61e+05

********** iter = 29 **********
Damping Factor is 0.1 
Delta Norm=2.11e+03  at node V1:p  harm=(2)
Resd Norm=5.52e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0314e+09 Hz, delta f= -2.15e+06

********** iter = 30 **********
Damping Factor is 0.1 
Delta Norm=1.41e+03  at node V1:p  harm=(2)
Resd Norm=9.25e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0310e+09 Hz, delta f= -4.48e+05

********** iter = 31 **********
Delta Norm=8.38e+02  at node V1:p  harm=(2)
Resd Norm=1.41e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0329e+09 Hz, delta f= 1.89e+06

********** iter = 32 **********
Damping Factor is 0.4 
Delta Norm=5.20e+02  at node V1:p  harm=(2)
Resd Norm=1.17e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0333e+09 Hz, delta f= 4.29e+05

********** iter = 33 **********
Damping Factor is 0.1 
Delta Norm=2.11e+02  at node V1:p  harm=(2)
Resd Norm=1.12e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0331e+09 Hz, delta f= -2.00e+05

********** iter = 34 **********
Damping Factor is 0.1 
Delta Norm=2.12e+02  at node V1:p  harm=(2)
Resd Norm=1.06e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0333e+09 Hz, delta f= 2.03e+05

********** iter = 35 **********
Damping Factor is 0.1 
Delta Norm=2.88e+02  at node V1:p  harm=(2)
Resd Norm=1.06e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0330e+09 Hz, delta f= -2.77e+05

********** iter = 36 **********
Damping Factor is 0.2 
Delta Norm=3.03e+02  at node V1:p  harm=(2)
Resd Norm=9.54e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0333e+09 Hz, delta f= 2.86e+05

********** iter = 37 **********
Damping Factor is 0.1 
Delta Norm=2.76e+02  at node V1:p  harm=(2)
Resd Norm=9.60e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0330e+09 Hz, delta f= -2.65e+05

********** iter = 38 **********
Damping Factor is 0.1 
Delta Norm=1.50e+02  at node V1:p  harm=(2)
Resd Norm=8.88e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0332e+09 Hz, delta f= 1.43e+05

********** iter = 39 **********
Damping Factor is 0.1 
Delta Norm=3.16e+02  at node V1:p  harm=(2)
Resd Norm=9.06e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0335e+09 Hz, delta f= 3.09e+05

********** iter = 40 **********
Delta Norm=6.02e+02  at node V1:p  harm=(2)
Resd Norm=4.83e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0330e+09 Hz, delta f= -5.24e+05

********** iter = 41 **********
Damping Factor is 0.5969 
Delta Norm=4.81e+02  at node V1:p  harm=(2)
Resd Norm=4.91e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0334e+09 Hz, delta f= 4.31e+05

********** iter = 42 **********
Damping Factor is 0.1 
Delta Norm=9.00e+02  at node V1:p  harm=(2)
Resd Norm=1.42e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0325e+09 Hz, delta f= -8.94e+05

********** iter = 43 **********
Damping Factor is 0.3 
Delta Norm=4.21e+02  at node V1:p  harm=(2)
Resd Norm=1.28e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0328e+09 Hz, delta f= 3.22e+05

********** iter = 44 **********
Damping Factor is 0.1 
Delta Norm=2.63e+02  at node V1:p  harm=(2)
Resd Norm=1.24e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0331e+09 Hz, delta f= 2.46e+05

********** iter = 45 **********
Damping Factor is 0.1 
Delta Norm=1.86e+02  at node V1:p  harm=(2)
Resd Norm=1.17e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0329e+09 Hz, delta f= -1.55e+05

********** iter = 46 **********
Damping Factor is 0.1 
Delta Norm=3.18e+02  at node V1:p  harm=(2)
Resd Norm=1.18e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0332e+09 Hz, delta f= 3.01e+05

********** iter = 47 **********
Delta Norm=7.93e+02  at node V1:p  harm=(2)
Resd Norm=9.20e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0326e+09 Hz, delta f= -5.73e+05

********** iter = 48 **********
Damping Factor is 0.3 
Delta Norm=2.97e+02  at node V1:p  harm=(2)
Resd Norm=7.81e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0329e+09 Hz, delta f= 2.24e+05

********** iter = 49 **********
Damping Factor is 0.3 
Delta Norm=2.88e+02  at node V1:p  harm=(2)
Resd Norm=6.54e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0331e+09 Hz, delta f= 2.63e+05

********** iter = 50 **********
Damping Factor is 0.1 
Delta Norm=1.33e+02  at node V1:p  harm=(2)
Resd Norm=6.07e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0333e+09 Hz, delta f= 1.33e+05

********** iter = 51 **********
Damping Factor is 0.1 
Delta Norm=2.85e+02  at node V1:p  harm=(2)
Resd Norm=6.32e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0335e+09 Hz, delta f= 2.86e+05

********** iter = 52 **********
Delta Norm=6.69e+02  at node V1:p  harm=(2)
Resd Norm=5.55e+02  at node M3:int_g  harm=(5)
Frequency= 3.0329e+09 Hz, delta f= -6.06e+05

********** iter = 53 **********
Damping Factor is 0.6123 
Delta Norm=5.20e+02  at node V1:p  harm=(2)
Resd Norm=5.60e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0334e+09 Hz, delta f= 4.69e+05

********** iter = 54 **********
Damping Factor is 0.1 
Delta Norm=2.18e+02  at node V1:p  harm=(2)
Resd Norm=5.62e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0332e+09 Hz, delta f= -2.12e+05

********** iter = 55 **********
Damping Factor is 0.1 
Delta Norm=1.60e+02  at node V1:p  harm=(2)
Resd Norm=5.33e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0334e+09 Hz, delta f= 1.60e+05

********** iter = 56 **********
Damping Factor is 0.1 
Delta Norm=1.68e+03  at node V1:p  harm=(2)
Resd Norm=4.19e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0317e+09 Hz, delta f= -1.67e+06

********** iter = 57 **********
Damping Factor is 0.1 
Delta Norm=5.02e+02  at node V1:p  harm=(2)
Resd Norm=4.34e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0317e+09 Hz, delta f= 1.71e+04

********** iter = 58 **********
Damping Factor is 0.1 
Delta Norm=3.80e+02  at node V1:p  harm=(2)
Resd Norm=4.30e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0317e+09 Hz, delta f= -4.26e+04

********** iter = 59 **********
Damping Factor is 0.1 
Delta Norm=8.12e+02  at node V1:p  harm=(2)
Resd Norm=5.25e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0318e+09 Hz, delta f= 9.75e+04

********** iter = 60 **********
Delta Norm=7.79e+02  at node V1:p  harm=(2)
Resd Norm=1.25e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0325e+09 Hz, delta f= 7.25e+05

********** iter = 61 **********
Damping Factor is 0.3 
Delta Norm=3.54e+02  at node V1:p  harm=(2)
Resd Norm=1.09e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0326e+09 Hz, delta f= 1.50e+05

********** iter = 62 **********
Damping Factor is 0.4 
Delta Norm=4.03e+02  at node V1:p  harm=(2)
Resd Norm=8.91e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0329e+09 Hz, delta f= 2.79e+05

********** iter = 63 **********
Damping Factor is 0.3 
Delta Norm=2.85e+02  at node V1:p  harm=(2)
Resd Norm=7.21e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0332e+09 Hz, delta f= 2.64e+05

********** iter = 64 **********
Damping Factor is 0.1 
Delta Norm=1.38e+02  at node V1:p  harm=(2)
Resd Norm=6.68e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0333e+09 Hz, delta f= 1.38e+05

********** iter = 65 **********
Damping Factor is 0.1 
Delta Norm=3.97e+02  at node V1:p  harm=(2)
Resd Norm=7.60e+02  at node I20.M5:int_d  harm=(0)
Frequency= 3.0337e+09 Hz, delta f= 3.99e+05

********** iter = 66 **********
Delta Norm=4.14e+02  at node V1:p  harm=(2)
Resd Norm=2.32e+02  at node M3:int_g  harm=(5)
Frequency= 3.0334e+09 Hz, delta f= -3.60e+05

********** iter = 67 **********
Damping Factor is 0.1 
Delta Norm=1.13e+02  at node V1:p  harm=(2)
Resd Norm=2.24e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= 1.12e+05

********** iter = 68 **********
Damping Factor is 0.1 
Delta Norm=2.81e+02  at node V1:p  harm=(2)
Resd Norm=2.97e+02  at node M3:int_g  harm=(5)
Frequency= 3.0338e+09 Hz, delta f= 2.84e+05

********** iter = 69 **********
Damping Factor is 0.581 
Delta Norm=3.82e+02  at node V1:p  harm=(2)
Resd Norm=3.01e+02  at node M3:int_g  harm=(5)
Frequency= 3.0334e+09 Hz, delta f= -3.88e+05

********** iter = 70 **********
Damping Factor is 0.1 
Delta Norm=1.42e+02  at node V1:p  harm=(2)
Resd Norm=2.95e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= 1.41e+05

********** iter = 71 **********
Damping Factor is 0.1 
Delta Norm=2.19e+03  at node V1:p  harm=(2)
Resd Norm=6.23e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0313e+09 Hz, delta f= -2.21e+06

********** iter = 72 **********

Warning from spectre during periodic steady state analysis `pss'.
    WARNING (CMI-2682): M4: The bulk-drain junction forward bias voltage (998.606 mV) exceeds `VjdmFwd' = 951.351 mV.  The results are now incorrect because the junction current model has been linearized
Notice from spectre during periodic steady state analysis `pss'.
    M4: The bulk-drain junction returns to normal bias condition
Warning from spectre during periodic steady state analysis `pss'.
    WARNING (CMI-2682): M3: The bulk-drain junction forward bias voltage (998.576 mV) exceeds `VjdmFwd' = 951.351 mV.  The results are now incorrect because the junction current model has been linearized

Damping Factor is 0.1 
Delta Norm=3.09e+03  at node V1:p  harm=(2)
Resd Norm=2.11e+04  at node I20.M5:int_d  harm=(0)
Frequency= 3.0298e+09 Hz, delta f= -1.52e+06

********** iter = 73 **********
Delta Norm=1.32e+03  at node V2:p  harm=(2)
Resd Norm=6.41e+03  at node I20.M5:int_d  harm=(0)
Frequency= 3.0342e+09 Hz, delta f= 4.46e+06

********** iter = 74 **********
Delta Norm=3.01e+02  at node V1:p  harm=(2)
Resd Norm=8.88e+02  at node M4:int_g  harm=(3)
Frequency= 3.0343e+09 Hz, delta f= 2.28e+04

********** iter = 75 **********
Delta Norm=4.54e+02  at node V1:p  harm=(2)
Resd Norm=2.36e+02  at node M4:int_s  harm=(0)
Frequency= 3.0338e+09 Hz, delta f= -4.78e+05

********** iter = 76 **********
Damping Factor is 0.3998 
Delta Norm=2.88e+02  at node V1:p  harm=(2)
Resd Norm=2.30e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= -2.99e+05

********** iter = 77 **********
Damping Factor is 0.1 
Delta Norm=2.88e+02  at node V1:p  harm=(2)
Resd Norm=3.08e+02  at node M3:int_g  harm=(5)
Frequency= 3.0338e+09 Hz, delta f= 2.90e+05

********** iter = 78 **********
Damping Factor is 0.6552 
Delta Norm=4.16e+02  at node V1:p  harm=(2)
Resd Norm=3.11e+02  at node M3:int_g  harm=(5)
Frequency= 3.0333e+09 Hz, delta f= -4.24e+05

********** iter = 79 **********
Damping Factor is 0.1 
Delta Norm=1.26e+02  at node V1:p  harm=(2)
Resd Norm=2.99e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= 1.25e+05

********** iter = 80 **********
Damping Factor is 0.1 
Delta Norm=5.37e+02  at node V1:p  harm=(2)
Resd Norm=6.27e+02  at node M3:int_g  harm=(5)
Frequency= 3.0340e+09 Hz, delta f= 5.41e+05

********** iter = 81 **********
Delta Norm=3.72e+02  at node V1:p  harm=(2)
Resd Norm=1.84e+02  at node M3:int_g  harm=(5)
Frequency= 3.0337e+09 Hz, delta f= -3.51e+05

********** iter = 82 **********
Damping Factor is 0.1 
Delta Norm=1.73e+02  at node V1:p  harm=(2)
Resd Norm=2.00e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= -1.78e+05

********** iter = 83 **********
Damping Factor is 0.1 
Delta Norm=2.24e+02  at node V1:p  harm=(2)
Resd Norm=2.40e+02  at node M3:int_g  harm=(5)
Frequency= 3.0337e+09 Hz, delta f= 2.25e+05

********** iter = 84 **********
Damping Factor is 0.1 
Delta Norm=9.61e+01  at node V1:p  harm=(2)
Resd Norm=2.27e+02  at node M3:int_g  harm=(5)
Frequency= 3.0336e+09 Hz, delta f= -9.88e+04

********** iter = 85 **********
Damping Factor is 0.1 
Delta Norm=2.42e+02  at node V1:p  harm=(2)
Resd Norm=2.73e+02  at node M3:int_g  harm=(5)
Frequency= 3.0334e+09 Hz, delta f= -2.47e+05

********** iter = 86 **********
Damping Factor is 0.1 
Delta Norm=1.20e+02  at node V1:p  harm=(2)
Resd Norm=2.62e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= 1.19e+05

********** iter = 87 **********
Damping Factor is 0.1 
Delta Norm=4.07e+02  at node V1:p  harm=(2)
Resd Norm=4.39e+02  at node M3:int_g  harm=(5)
Frequency= 3.0339e+09 Hz, delta f= 4.11e+05

********** iter = 88 **********
Delta Norm=4.41e+02  at node V1:p  harm=(2)
Resd Norm=2.44e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= -4.36e+05

********** iter = 89 **********
Damping Factor is 0.1 
Delta Norm=2.12e+02  at node V1:p  harm=(2)
Resd Norm=2.73e+02  at node M3:int_g  harm=(5)
Frequency= 3.0337e+09 Hz, delta f= 2.13e+05

********** iter = 90 **********
Damping Factor is 0.1 
Delta Norm=1.09e+02  at node V1:p  harm=(2)
Resd Norm=2.60e+02  at node M3:int_g  harm=(5)
Frequency= 3.0336e+09 Hz, delta f= -1.12e+05

********** iter = 91 **********
Damping Factor is 0.1 
Delta Norm=5.27e+02  at node V1:p  harm=(2)
Resd Norm=5.50e+02  at node M3:int_g  harm=(5)
Frequency= 3.0330e+09 Hz, delta f= -5.35e+05

********** iter = 92 **********
Damping Factor is 0.5787 
Delta Norm=5.05e+02  at node V1:p  harm=(2)
Resd Norm=5.39e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= 4.70e+05

********** iter = 93 **********
Damping Factor is 0.2 
Delta Norm=2.26e+02  at node V1:p  harm=(2)
Resd Norm=4.94e+02  at node M3:int_g  harm=(5)
Frequency= 3.0333e+09 Hz, delta f= -2.16e+05

********** iter = 94 **********
Damping Factor is 0.1 
Delta Norm=1.96e+02  at node V1:p  harm=(2)
Resd Norm=4.92e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= 1.96e+05

********** iter = 95 **********
Damping Factor is 0.1 
Delta Norm=1.75e+02  at node V1:p  harm=(2)
Resd Norm=4.80e+02  at node M3:int_g  harm=(5)
Frequency= 3.0333e+09 Hz, delta f= -1.71e+05

********** iter = 96 **********
Damping Factor is 0.1 
Delta Norm=2.25e+02  at node V1:p  harm=(2)
Resd Norm=4.94e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= 2.25e+05

********** iter = 97 **********
Damping Factor is 0.2 
Delta Norm=2.20e+02  at node V1:p  harm=(2)
Resd Norm=4.55e+02  at node M3:int_g  harm=(5)
Frequency= 3.0333e+09 Hz, delta f= -2.13e+05

********** iter = 98 **********
Damping Factor is 0.1 
Delta Norm=2.10e+02  at node V1:p  harm=(2)
Resd Norm=4.63e+02  at node M3:int_g  harm=(5)
Frequency= 3.0335e+09 Hz, delta f= 2.10e+05

********** iter = 99 **********
Damping Factor is 0.1 
Delta Norm=1.30e+02  at node V1:p  harm=(2)
Resd Norm=4.38e+02  at node M3:int_g  harm=(5)
Frequency= 3.0334e+09 Hz, delta f= -1.28e+05

********** iter = 100 **********
Damping Factor is 0.1 
Delta Norm=9.18e+02  at node V1:p  harm=(2)
Resd Norm=1.47e+03  at node M3:int_g  harm=(5)
Frequency= 3.0343e+09 Hz, delta f= 9.19e+05

Warning: Maximum number of iterations reached. Result may not be correct. You can increase tstab and harms or try to use twotier method.

CPU time=7 s


Restart and try two-tier method.
Trying `homotopy = gmin'.

Notice from spectre during DC analysis, during periodic steady state analysis `pss'.
    GminDC = 1 pS is large enough to noticeably affect the DC solution.
        dV(net026) = -54.9448 mV
        Use the `gmin_check' option to eliminate or expand this report.
    Bad pivoting is found during DC analysis. Option dc_pivot_check=yes is recommended for possible improvement of convergence.

DC simulation time: CPU = 26.996 ms, elapsed = 27.1771 ms.

Using linear IC
Linear IC: estimated frequency is 2.76904e+09 Hz
Estimated frequency 2.769040e+09 Hz
First pinning node: 5, name: out_n
Second pinning node: 4, name: out_p
Pinning : harm: 1, value: (0.010000, 0.000000)

==============================
     Harmonic balance
==============================
Important HB parameters:
    RelTol=1.00e-05
    abstol(I)=1.00e-12 A
    abstol(V)=1.00e-06 V
    residualtol=1.00e+00
    lteratio=1.00e+01
    steadyratio=1.00e+00
    maxperiods=100


Generating Oscillator Waveform Initial Guess

********** IC iter = 1 **********
Probe value is ...1.440000e-02
Probe current is ...1.487892e-05


********** IC iter = 2 **********
Probe value is ...2.073600e-02
Probe current is ...2.136421e-05


********** IC iter = 3 **********
Probe value is ...2.985984e-02
Probe current is ...3.058126e-05


********** IC iter = 4 **********
Probe value is ...4.299817e-02
Probe current is ...4.349288e-05


********** IC iter = 5 **********
Probe value is ...6.191736e-02
Probe current is ...6.101591e-05


********** IC iter = 6 **********
Probe value is ...8.916100e-02
Probe current is ...8.311137e-05


********** IC iter = 7 **********
Probe value is ...1.283918e-01
Probe current is ...1.059662e-04


********** IC iter = 8 **********
Probe value is ...1.848843e-01
Probe current is ...1.150447e-04


********** IC iter = 9 **********
Probe value is ...2.662333e-01
Probe current is ...7.629898e-05


********** IC iter = 10 **********
Probe value is ...2.715580e-01
Probe current is ...2.538428e-05


********** IC iter = 11 **********
Probe value is ...2.822073e-01
Probe current is ...1.112679e-05

Initial Waveform Guess Found

********** initial residual **********
Resd Norm=6.76e-02  at node M3:int_g  harm=(8)

********** Inner iter = 1 **********
Resd Norm=4.81e-04  at node M4:int_g  harm=(13)
Probe current=(-3.7420e-06, -2.3388e-04), delta=(5.6065e-12, 4.0227e-12)

-> Outer iter= 1: Probe Current=(-3.7420e-06, -2.3388e-04), norm =1.7751e+01
-> Outer iter= 1: Frequency=3.2070e+09 Hz, delta=4.3800e+08, norm=1.3657e+04
-> Outer iter= 1: ProbeVol=(3.9451e-01,0.0000e+00), delta=1.0698e-01, norm =2.6446e+03, Damping factor =1.0000e+00

********** initial residual **********
Resd Norm=2.83e+03  at node I19.M_ver_n:int_g  harm=(2)

********** Inner iter = 1 **********
Resd Norm=1.10e+03  at node I20.M5:int_s  harm=(1)
Probe current=(6.7649e-06, 1.0735e-04), delta=(6.7649e-06, 1.0735e-04)

********** Inner iter = 2 **********
Resd Norm=3.04e+02  at node M3:int_g  harm=(3)
Probe current=(4.3885e-06, 1.0457e-04), delta=(-2.3764e-06, -2.7870e-06)

********** Inner iter = 3 **********
Resd Norm=1.11e+01  at node M3:int_g  harm=(1)
Probe current=(4.5662e-06, 1.0434e-04), delta=(1.7768e-07, -2.2870e-07)

********** Inner iter = 4 **********
Resd Norm=2.56e-01  at node M3:int_g  harm=(4)
Probe current=(4.5717e-06, 1.0434e-04), delta=(5.5545e-09, 5.6587e-09)

-> Outer iter= 2: Probe Current=(4.5717e-06, 1.0434e-04), norm =6.8827e+00
-> Outer iter= 2: Frequency=3.1033e+09 Hz, delta=-1.0370e+08, norm=3.3415e+03
-> Outer iter= 2: ProbeVol=(3.7019e-01,0.0000e+00), delta=-2.4322e-02, norm =6.3974e+02, Damping factor =1.0000e+00

********** initial residual **********
Resd Norm=5.80e+02  at node I19.M3:int_g  harm=(2)

********** Inner iter = 1 **********
Resd Norm=4.18e+01  at node M3:int_g  harm=(3)
Probe current=(4.2644e-08, 5.4505e-06), delta=(4.2644e-08, 5.4505e-06)

********** Inner iter = 2 **********
Resd Norm=9.12e+00  at node M3:int_g  harm=(2)
Probe current=(2.7448e-07, 5.4247e-06), delta=(2.3184e-07, -2.5865e-08)

********** Inner iter = 3 **********
Resd Norm=1.80e-01  at node M4:int_g  harm=(11)
Probe current=(2.6996e-07, 5.4222e-06), delta=(-4.5236e-09, -2.5168e-09)

-> Outer iter= 3: Probe Current=(2.6996e-07, 5.4222e-06), norm =3.6952e-01
Set damping factor to 1
-> Outer iter= 3: Frequency=3.0973e+09 Hz, delta=-6.0073e+06, norm=1.9394e+02
-> Outer iter= 3: ProbeVol=(3.6881e-01,0.0000e+00), delta=-1.3806e-03, norm =3.6447e+01, Damping factor =1.0000e+00

********** initial residual **********
Resd Norm=1.48e+00  at node I19.M3:int_g  harm=(2)

********** Inner iter = 1 **********
Resd Norm=2.01e-01  at node M3:int_g  harm=(6)
Probe current=(4.1068e-10, 1.8046e-08), delta=(4.1068e-10, 1.8046e-08)

-> Outer iter= 4: Probe Current=(4.1068e-10, 1.8046e-08), norm =1.2309e-03
-> Outer iter= 4: Frequency=3.0973e+09 Hz, delta=-2.0236e+04, norm=6.5331e-01
-> Outer iter= 4: ProbeVol=(3.6880e-01,0.0000e+00), delta=-5.0271e-06, norm =1.3271e-01, Damping factor =1.0000e+00


*************************************************
Fundamental frequency is 3.09731 GHz.
*************************************************

CPU time=2 s


Opening the PSF file ../psf/pss.td.pss ...

Opening the PSF file ../psf/pss.fd.pss ...
Total time required for pss analysis `pss': CPU = 17.7743 s, elapsed = 17.9346 s.
Time accumulated: CPU = 18.0942 s, elapsed = 18.6185 s.
Peak resident memory used = 65.1 Mbytes.


Notice from spectre.
    30 notices suppressed.

modelParameter: writing model parameter values to rawfile.

Opening the PSF file ../psf/modelParameter.info ...
element: writing instance parameter values to rawfile.

Opening the PSF file ../psf/element.info ...
outputParameter: writing output parameter values to rawfile.

Opening the PSF file ../psf/outputParameter.info ...
designParamVals: writing netlist parameters to rawfile.

Opening the PSFASCII file ../psf/designParamVals.info ...
primitives: writing primitives to rawfile.

Opening the PSFASCII file ../psf/primitives.info.primitives ...
subckts: writing subcircuits to rawfile.

Opening the PSFASCII file ../psf/subckts.info.subckts ...