Stats

  • State Not Answered
  • Replies 6
  • Subscribers 43
  • Views 1790
  • Members are here 0
More Content

Creating Netlist in ORCAD capture 17.4

ZL202408205920

hello
I have several questions about this issue:
1. About creating netlist after I click tools->create netlist->Other
why there is necessity for DLL if I user formatter
2. What is the benefit and purpose of each formatter
3.I succeeded to create netlist but I tried to use CFG file
it didn't work I don't know why. I tried to import several details(Nets from my all schematics) from ONL file 
I would like to know how to use it correctly for each formatter
for example orDump64.dll
4)There is possibility to create my own DLL?
if so how to do it

Best regards

Parents
  • 0

    Hello,

    1.It specifies in which netlist format you want to export the netlist of a schematic design.

    2. Document link which explains various netlist formats -OrCAD Capture User Guide -- Netlisting a Design

    3. Specify a configuration file that contains the properties to be transferred to the .ONL file. The .ONL file is an intermediate file for all netlists in the Other tab. OrCAD Capture creates a .ONL file and this file is referred while creating the netlists. Note that all properties in the .ONL file might not be present in the netlists because some of the properties might be ignored.

    DUMP netlist format i.e., orDump64.dll --This format produces a flat netlist containing all the information on the schematic pages. In this netlist no information is omitted or changed.

    4. Which properties are you expecting in netlist format?

  • 0 in reply to Jeet

    2. I read there isn't docomuntation so much only writen one sentence
    3. I have been seen ONL file and the docomuntation in help but the sample of cfg file in "help" function that link to ONL file doesn't work on
    4.For example I want to remove PinType or module field in output Pdump Format
    5. I saw that you writen that not all properties appears in ONL file thus what is the restrictions of the field to be appear? Since I am intresting to add properties that will be appear.

    But first I am struggling with CFG activatoin

    Best regards

Reply
  • 0 in reply to Jeet

    2. I read there isn't docomuntation so much only writen one sentence
    3. I have been seen ONL file and the docomuntation in help but the sample of cfg file in "help" function that link to ONL file doesn't work on
    4.For example I want to remove PinType or module field in output Pdump Format
    5. I saw that you writen that not all properties appears in ONL file thus what is the restrictions of the field to be appear? Since I am intresting to add properties that will be appear.

    But first I am struggling with CFG activatoin

    Best regards

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.