Stats

  • Replies 6
  • Subscribers 162
  • Views 3671
  • Members are here 0
More Content

DRC Problem after updating trace width - now won't go away

Justin Loop

I have an interesting problem.  I have eight (8) connectors on a PCB. One, for some reason, is giving me problems.  I am getting a DRC problem.  I have NO IDEA why I am getting this problem.  Here is some picture for a better understanding:

I have no idea how to fix this problem.  Please provide a STEP BY STEP resolution to fix this.  All other connectors are just fine.

Thank you.

JTL

Parents

  • Hello,

    It looks like you have a text string ("1") sitting inside of the pad boundary on the Bottom Etch Layer which is causing the DRCs.

    Using Check > Element (Show Element) with only Text enabled in the Find pane and you should find the text string on Etch/Bottom.

    If you do find it than simply delete it to remove the DRCs using similar steps

    1. Edit > Delete
    2. Enable only Text under the Find pane
    3. Select the text string "1"
    4. RMB > Done

    Hope this helps,
    Mike Catrambone

Reply

  • Hello,

    It looks like you have a text string ("1") sitting inside of the pad boundary on the Bottom Etch Layer which is causing the DRCs.

    Using Check > Element (Show Element) with only Text enabled in the Find pane and you should find the text string on Etch/Bottom.

    If you do find it than simply delete it to remove the DRCs using similar steps

    1. Edit > Delete
    2. Enable only Text under the Find pane
    3. Select the text string "1"
    4. RMB > Done

    Hope this helps,
    Mike Catrambone

Children
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.