Stats

  • Replies 11
  • Subscribers 165
  • Views 19202
  • Members are here 0
More Content

Mouse recommendation for Allegro use

gbejby

Hello everyone,

I apologize if this is not the right forum to use for this post.

I was wondering if anyone can suggest a specific mouse manufacturer/brand that is best for using with Allegro. I use Allegro 70+ hours a week and I am looking for a type of mouse that helps relief the stress off of my wrist and thumb. My hands are large which puts a lot of stress and strain on my hand and fingers when the mouse size is not proportional.

I tried so many mice but no luck. I also searched online for the best PC mice for CAD engineers and that did not lead anywhere.

So any suggestions would be greatly appreciated.

Thanks in advance.

gbej

Parents

  • Way back when before the wonderfull software gurus broke the functionality (15.7 -> 16.x), I used the large trackball from Kenisington.  Used this trackball for about 12 yrs, never hand a hand issue.  When I switched over to the mouse, I developed carpal tunnel - took about 6 yrs.  Howver, you want a recommendation:  The best I had was a Logictech GX500 (model number maybe off - from memory) which has been discontinued.  Now I have found that the Razer Deather Adder Elite works best for me.  Good DPI, resizable DPI on the fly, and quite comfortable.  However there is a downside, the center mouse becomes an issue after a year or so of use.  I find the wheel click feature with click when I am zooming and  also mounting rod on the mouse wheel breaks after a year or so of use.  So to avoid having to find a new one, II stock up on these, have about 4 in my cabinet Slight smile  I hope this helps!

Reply

  • Way back when before the wonderfull software gurus broke the functionality (15.7 -> 16.x), I used the large trackball from Kenisington.  Used this trackball for about 12 yrs, never hand a hand issue.  When I switched over to the mouse, I developed carpal tunnel - took about 6 yrs.  Howver, you want a recommendation:  The best I had was a Logictech GX500 (model number maybe off - from memory) which has been discontinued.  Now I have found that the Razer Deather Adder Elite works best for me.  Good DPI, resizable DPI on the fly, and quite comfortable.  However there is a downside, the center mouse becomes an issue after a year or so of use.  I find the wheel click feature with click when I am zooming and  also mounting rod on the mouse wheel breaks after a year or so of use.  So to avoid having to find a new one, II stock up on these, have about 4 in my cabinet Slight smile  I hope this helps!

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.