gds import/epxport

use 'stream out' to write gds files

use 'load stream' to import gds files

thank u, david, for ur reply.

i tried to import a gds file, but it does not allow me to select all layers from the gds file.

how can i import all layers of a gds file into the pcb editor?

regards

masa

It works correctly for me...

My initial question is why don't you have class and subclass entries mapped for those 3 layers?

thank u, david for ur response as always.

this is the first time i imported gds file so i know nothing about gds.

this gds file was created by our customer so i do not know why there is subclass on the gds file.

cadence told me that i need the latest hotfix to solve this.

so i am trying to install the latest one.

I would recommend you take a simple board file & export a stream file, then import it back into new layers in the manufacturing class

That is how I learned to use these commands

I would recommend you take a simple board file & export a stream file, then import it back into new layers in the manufacturing class

That is how I learned to use these commands

thank u david,

that is a good idea.

let me try that.