Stats

  • State Not Answered
  • Replies 1
  • Subscribers 160
  • Views 157
  • Members are here 0
More Content

Query on Unrouted Connections DRC

WG20250730781

I have a query about unrouted connections DRC.

A square pin is GND. It has a square keepout region surrounding it. It connects to the surrounding GND by using a shape belonging to the GND net. However, the DRC doesn't detect this and still classifies it as an unrouted connection.

Is there no way to resolve this error other than to physically route a line connect? 

Parents
  • 0

    You have a keep-out region on the pin. Is this a route keep-out?

    Is the ground shape actually touching the pin? If not, the pin center must be touching the shape or traces connected from the plane to the pin to make the connection.

    Are you trying to create thermal relief on the pin connection? If so, delete the keep-out region and edit the pin property to change the connection type, or change all through hole pin to shape connections in the shape parameters. 

    Not sure if I understand, but I hope this helps.

Reply
  • 0

    You have a keep-out region on the pin. Is this a route keep-out?

    Is the ground shape actually touching the pin? If not, the pin center must be touching the shape or traces connected from the plane to the pin to make the connection.

    Are you trying to create thermal relief on the pin connection? If so, delete the keep-out region and edit the pin property to change the connection type, or change all through hole pin to shape connections in the shape parameters. 

    Not sure if I understand, but I hope this helps.

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.