Design Rules Check OPTION FROM TCL

Question

I want to use a TCL script to trigger changes to the DRC configuration, to avoid having to reconfigure DRC every time I switch DSNs. Originally, I tried using the following code: 
 Menu "PCB::Design Rules Check" | DialogBox "OK" "C:/Users/ZHANGH~1/AppData/Local/Temp/CAPTURELOG/Fri_Jul_25_16_27_33_2025/Undo Warning!!_1.xml" 
 However, after executing it, only the UI interface appeared, and I was still missing the DRC configuration information. Do you have any suggestions on how I can achieve my goal?

TechnoBobby · Answer

Hi ZH202409115233 , You can achieve this using below steps: 1. First, enable logging mode by running following commands in command window: orPrmAutomation::setMode 1 orPrmAutomation::setPath {C:/temp/drc.log} 2. Then open the DRC UI from PCB > Design Rules Check, configure the required rules, and click Run. This will generate a drc.log file at the above path. i.e. {C:/temp/drc.log} 3. To reuse the configuration in any dsn, use: orPrmAutomation::setMode 2 orPrmAutomation::setPath {C:/temp/drc.log} Menu "PCB::Design Rules Check" | DialogBox "OK" "C:%temp%/CAPTURELOG/<Folder_name_with_day_date>/Undo Warning!!_1.xml" Make sure the paths to drc.log and the XML file are valid and correctly updated. Hope this helps!

Stats

Design Rules Check OPTION FROM TCL

Community Guidelines