Stats

  • Locked Locked
  • Replies 23
  • Subscribers 168
  • Views 26263
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Newbie on PCB Editor

sympatique

Hello everyboby !!!

 

I am newbie on PCB editor , I have make my shematic with Orcad Capture CIS, And I really don't know where to retrive the

information on how to transfer my shematic on the PCB Editor.  I have made the cross reference report, design rules check, and

the netlist...

I work with version 16.0

Thank you for reading my mesage.

Thank you for your help.

 

Parents
  • sympatique

    Thank you to all for your help. Thank to John Davies, titoth and BillZ.

    I made the netlist process and it seem to goes so far so good.  I have some ERRORS ... (device library errors) telling me JEDEC_TYPE property ' **********' is illegal. 'Package name has invalid characters or is too long' 

    For exemples : 'DIP.100/88/w.300/l.450'    or 'AXRC05"   How can I change thode library and having the good Footprint.  Especially for the discrete part. I made a good way to now... after this issue i think that it will be easier.

    Thank you for your help..

Reply
  • sympatique

    Thank you to all for your help. Thank to John Davies, titoth and BillZ.

    I made the netlist process and it seem to goes so far so good.  I have some ERRORS ... (device library errors) telling me JEDEC_TYPE property ' **********' is illegal. 'Package name has invalid characters or is too long' 

    For exemples : 'DIP.100/88/w.300/l.450'    or 'AXRC05"   How can I change thode library and having the good Footprint.  Especially for the discrete part. I made a good way to now... after this issue i think that it will be easier.

    Thank you for your help..

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.