Stats

  • Locked Locked
  • Replies 23
  • Subscribers 168
  • Views 26272
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Newbie on PCB Editor

sympatique

Hello everyboby !!!

 

I am newbie on PCB editor , I have make my shematic with Orcad Capture CIS, And I really don't know where to retrive the

information on how to transfer my shematic on the PCB Editor.  I have made the cross reference report, design rules check, and

the netlist...

I work with version 16.0

Thank you for reading my mesage.

Thank you for your help.

 

Parents
  • cilamp

    Hi,

     I am also a beginner, and I have a simular problem.  Expet it sais that I have to extra pins named N and P. I then did as you recommended earlier. But it does not seem like my program responses. I change the part so that the pins changed name from A and K to 1 and 2. I did not work. I then changed it also in my own library, and copied it to design catche. I must have something wrong, that I cannot find.

    I would be very greatful for response!

    #1 ERROR(SPMHNI-191): Device/Symbol check error detected.

    ERROR(SPMHNI-196): Symbol 'CPAX600X200034' for device 'C_CPAX600X200034_2.2UF' has extra pin 'N'.

    ERROR(SPMHNI-196): Symbol 'CPAX600X200034' for device 'C_CPAX600X200034_2.2UF' has extra pin 'P'.

    ERROR(SPMHNI-195): Symbol 'CPAX600X200034' for device 'C_CPAX600X200034_2.2UF' is missing pin '1'.

    ERROR(SPMHNI-195): Symbol 'CPAX600X200034' for device 'C_CPAX600X200034_2.2UF' is missing pin '2'.

    #1 WARNING(SPMHNI-192): Device/Symbol check warning detected.

    WARNING(SPMHNI-194): Symbol 'DAX041' for device 'DIODE_DAX041_DIODE' not found in PSMPATH or must be "dbdoctor"ed.

Reply
  • cilamp

    Hi,

     I am also a beginner, and I have a simular problem.  Expet it sais that I have to extra pins named N and P. I then did as you recommended earlier. But it does not seem like my program responses. I change the part so that the pins changed name from A and K to 1 and 2. I did not work. I then changed it also in my own library, and copied it to design catche. I must have something wrong, that I cannot find.

    I would be very greatful for response!

    #1 ERROR(SPMHNI-191): Device/Symbol check error detected.

    ERROR(SPMHNI-196): Symbol 'CPAX600X200034' for device 'C_CPAX600X200034_2.2UF' has extra pin 'N'.

    ERROR(SPMHNI-196): Symbol 'CPAX600X200034' for device 'C_CPAX600X200034_2.2UF' has extra pin 'P'.

    ERROR(SPMHNI-195): Symbol 'CPAX600X200034' for device 'C_CPAX600X200034_2.2UF' is missing pin '1'.

    ERROR(SPMHNI-195): Symbol 'CPAX600X200034' for device 'C_CPAX600X200034_2.2UF' is missing pin '2'.

    #1 WARNING(SPMHNI-192): Device/Symbol check warning detected.

    WARNING(SPMHNI-194): Symbol 'DAX041' for device 'DIODE_DAX041_DIODE' not found in PSMPATH or must be "dbdoctor"ed.

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.