Stats

  • Locked Locked
  • Replies 40
  • Subscribers 168
  • Views 40266
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Allegro PCB Editor Report like Condensed BOM report

ahmetozsoy

Hi,

Allegro Editor ( 16.2)  generates Bill of Material Report(Condensed). The report columns are SYM_NAME,COMP_DEVICE_TYPE,COMP_VALUE,COMP_TOL,COMP_CLASS, QUANTITY and REFDES.

This simplified report gives the quantities and used component REFDES in same line.

For ex.

SYM_NAME   COMP_DEVICE_TYPE                                                                                        COMP_VALUE .... REFDES

0402               CAP_SMD-GRM155R71C103KA88D-0402,10NF_50V,GRM155R71C103KA88D        10NF_50V    .....   C3,C5.....

What I want to do is to genarate a report like this simplified one but with PART_NUMBER not COMP_DEVICE_TYPE. Because COMP_DEVICE_TYPE is always long and does inculde extra information other than PART_NUMBER, I wish to use only the PART_NUMBER intsead of COMP_DEVICE_TYPE.

I have checked every option and could not find a simplified report like this one. QUANTITY doesn't exist in generating reports. I want to see the quantity in one line only. So my report can be like this

SYM_NAME   PART_NUMBER                    COMP_VALUE .... REFDES

0402               GRM155R71C103KA88D        10NF_50V    .....   C3,C5.....

Thank you for your helps.

Ahmet OZSOY

Parents
  • oldmouldy

    3377.cond_bom.zip

    Hi Chad, The code didn't allow for "all" of a component definition to be DNI, giving an empty list. I also realised that I modified an earlier version that didn't exclude the "reserved" part numbers. his should be OK now, at least, it's OK with the test board!

Reply
  • oldmouldy

    3377.cond_bom.zip

    Hi Chad, The code didn't allow for "all" of a component definition to be DNI, giving an empty list. I also realised that I modified an earlier version that didn't exclude the "reserved" part numbers. his should be OK now, at least, it's OK with the test board!

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.