Stats

  • Locked Locked
  • Replies 0
  • Subscribers 164
  • Views 12889
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Error in create netlist

Mohad

 hi,

I have a problem with create netlist in orcad and i have this error "  [ALG0014] Conflicting values of part name found on different sections of "U1".
        Conflicting values: XO2_256_64UCBGA_AC_0_XO2_256_64UCBGA_AC_(S1+S2+S3+S4+S5+S6)_XO2_256_64UCBGA_AC & XO2_256_64UCBGA_AC_XO2_256_64UCBGA_AC_(S1+S2+S3+S4+S5+S6)_XO2_256_64UCBGA_AC
        Property values of "Device","PCB FootPrint", "Class" and "Value" should be identical
        on all sections of the part."

in the project the (BGA) is divided to multiple sections , so the problem that they didn't take the same name in all sections , i think that is the problem and i need help to figure that .

thanks.
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.