Stats

  • Locked Locked
  • Replies 7
  • Subscribers 167
  • Views 15073
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

parallel trace

tnehchuan

 Hi,

Can i know how to check the total lenght of a trace from a point to point?

and how to draw a parallel line which are same lenght from both starting point to another point?

Parents

  •  HI TNEHCHUAN,

    WHEN YOU WANT TO MEASURE THE TRACE LENGTH FOR LENGTH MATCHING,U CAN USE TOOLS>QUICK REPORTS> ETCH LENGTH BY NET.THERE WILL BE A LIST OF LENGTH OF NETS.YOU WILL SEE THE MEASUREMENTS FOR THE NETS AND  YOU CAN FIND OUT REQUIRED NETS EASILY.

    BUT THERE IS A WAY YOU CAN DRAW NETS ,HAVE THE SAME LENGTH, THAT HAS A STATUS BAR.IT SHOWS MATCHING BY GREEN AND RED COLORS.IF YOU DRAW LONGER ONE IT SHOWS RED AND ALSO THE DISTANCE.ACTUALLY YOU CAN USE THE TOOL BY GIVING AN INTERVAL.MAX LENGTH AND MIN LENGTH.FIRST YOU SHOULD DECIDE THE MAX AND MIN VALUES.ALL OF THESE ARE IN THECONSTRAINT MANAGER>ELECTRICAL(ON LEFT -WORKSHEET SELECTOR)>NET>ROUTING>TOTAL ETCH LENGTH.

Reply

  •  HI TNEHCHUAN,

    WHEN YOU WANT TO MEASURE THE TRACE LENGTH FOR LENGTH MATCHING,U CAN USE TOOLS>QUICK REPORTS> ETCH LENGTH BY NET.THERE WILL BE A LIST OF LENGTH OF NETS.YOU WILL SEE THE MEASUREMENTS FOR THE NETS AND  YOU CAN FIND OUT REQUIRED NETS EASILY.

    BUT THERE IS A WAY YOU CAN DRAW NETS ,HAVE THE SAME LENGTH, THAT HAS A STATUS BAR.IT SHOWS MATCHING BY GREEN AND RED COLORS.IF YOU DRAW LONGER ONE IT SHOWS RED AND ALSO THE DISTANCE.ACTUALLY YOU CAN USE THE TOOL BY GIVING AN INTERVAL.MAX LENGTH AND MIN LENGTH.FIRST YOU SHOULD DECIDE THE MAX AND MIN VALUES.ALL OF THESE ARE IN THECONSTRAINT MANAGER>ELECTRICAL(ON LEFT -WORKSHEET SELECTOR)>NET>ROUTING>TOTAL ETCH LENGTH.

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.