Stats

  • Locked Locked
  • Replies 3
  • Subscribers 166
  • Views 15204
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

mechanical alignment hole not showing properly in 16.5 PCB Editor (look ok in 3D view)

mfris

Hi everyone,

Amateur user here.

I created a couple of footprints with mechanical alignment holes that go through the PCB (I also created the padstack that defines the holes).  As far as I can tell, everything looks fine for the various holes while in the footprint editing mode.  When I bring the parts into PCB Editor to place the part, I can see a shape in the area where the holes should be, but none of the shapes are the right size and I'm able to route in the area without a DRC.  When I switch to the 3D view, the hole shapes appear to be the right dimensions.

 Any thoughts on what I need to do differently to get the holes to show up in PCB edit mode?  Thanks in advance for any help.

 Best regards.

Parents
  • mfris

    Ron and Steve,

     Thank you both for the quick reply.  In my case, going to Setup->Design Parameters and slecting "Display Non-Plated Holes" resolved the issue of not seeing the hole.  Setup -> Constraints -> Modes gave me the view to turn on the DRCs. 

    Thanks again for the help!!

Reply
  • mfris

    Ron and Steve,

     Thank you both for the quick reply.  In my case, going to Setup->Design Parameters and slecting "Display Non-Plated Holes" resolved the issue of not seeing the hole.  Setup -> Constraints -> Modes gave me the view to turn on the DRCs. 

    Thanks again for the help!!

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.