Stats

  • Locked Locked
  • Replies 3
  • Subscribers 165
  • Views 14659
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Design Entry HDL grid errors

tmd63

 I have been trying to build a schematic and the grids are not loading properly.

 Under Tool, Options, Grids, I have set my grid to Decimal, Show Logic Grid - On, Size 0.025, Multiple 1.

But the console show my grid as size 0.024  1.

When I check the grid size I have dots at 0.012 pitch.???????

Can anyone enlighten as to why the grids are nothing like those required. And the components will not lock on the correct grid to make a clean schematic.

Parents
  • Jerry GenPart
    DEHDL does not allow odd number values for the grid setting. That’s why you’re seeing the “rounding” to

    an even value grid display.

    Jerry
Reply
  • Jerry GenPart
    DEHDL does not allow odd number values for the grid setting. That’s why you’re seeing the “rounding” to

    an even value grid display.

    Jerry
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.