Stats

  • Locked Locked
  • Replies 11
  • Subscribers 168
  • Views 33540
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Capture CIS ORCIS-6182 I am not sure what this means

Ksquared
When I do update part status I get the following message:
 
ERROR(ORCIS-6182): Cannot find approved part number ECJ-1VB1H122K Linked To Schematic Part C129. 
 
I have checked the part and all the data has been properly passed from the database to the part but is shows up with a red dot and says Approved: Not Found
 
 If I go to link database part and select the part from the database everything shows up green and all the data fields match. 
 
I tried searching in the documentation for the list of Error codes and found some in the CIS Reference manual but it only listed ORCIS-8xxx and above. Is there a document where I can find all the error codes? 
Parents
  • Ed B

    Go to the first tab in the CIS configuration screen (for configuring the .dbc file).  This is where is asks for your database.  Below is the list of Tables in your database.  To the right is a similar pulldown that will have probably the same names as the tables in your database,

     More importantly, the top line should be BLANK.  Select this blank line and save the .dbc file.

     Now go back and relink and update the part and it should go "Approved: Current" with the  green dot.

    I had this problem and it took 2 days to figure out that I mistakenly changes the setting the the name of a new database table I added.  After that, only original database parts worked (I made a copy of the cadence CIS db and added a parts table for my new stuff because I didn't want to add parts to the main tables.)

    Interestingly enough, if you search the documentation for the function of the pulldown I note above - THERE IS NOTHING ABOUT IT.  You can find a page that describes everything on that configuration tab EXCEPT THAT PULLDOWN.

    We found 1 google result where the person said its used to help use mechanical parts and get them on the BOM, but there was not detail and we did not understand the functionality of the pulldown except that it seems to act as some sort of filter.

    Hope this helps future users searching for help on error ORCIS-6182 approved part not found,

    Ed

Reply
  • Ed B

    Go to the first tab in the CIS configuration screen (for configuring the .dbc file).  This is where is asks for your database.  Below is the list of Tables in your database.  To the right is a similar pulldown that will have probably the same names as the tables in your database,

     More importantly, the top line should be BLANK.  Select this blank line and save the .dbc file.

     Now go back and relink and update the part and it should go "Approved: Current" with the  green dot.

    I had this problem and it took 2 days to figure out that I mistakenly changes the setting the the name of a new database table I added.  After that, only original database parts worked (I made a copy of the cadence CIS db and added a parts table for my new stuff because I didn't want to add parts to the main tables.)

    Interestingly enough, if you search the documentation for the function of the pulldown I note above - THERE IS NOTHING ABOUT IT.  You can find a page that describes everything on that configuration tab EXCEPT THAT PULLDOWN.

    We found 1 google result where the person said its used to help use mechanical parts and get them on the BOM, but there was not detail and we did not understand the functionality of the pulldown except that it seems to act as some sort of filter.

    Hope this helps future users searching for help on error ORCIS-6182 approved part not found,

    Ed

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.