Stats

  • Locked Locked
  • Replies 9
  • Subscribers 167
  • Views 6370
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Artwork created with warnings - What are they?

TH Designs

I'm being told by a nice little box that my artwork has been created with warnings. When I look in the log file, sure enough, it says in the summary that certain layers had warnings but there are no little clues as to what they are and how to fix them.

So......... How do I figure out what these warnings are?????

I have generated artwork for other board files with no issues. This particular one has been fighting me every step.

Tom

Parents
  • TH Designs

    Typical detailed output for each layer

    ================================================================
         PROCESSING FILM < LAYER7 >
         TO FILE < C:/allegro/LAYER7.art > ...
    ================================================================

      FILM PARAMETERS :
      ---------------------------------------------------------
      Undefined line width                8.00
      Mirror code                         NONE
      Rotate angle                        NONE
      Offset x:                           0.00
      Offset y:                           0.00
      Plot negative                       NO
      Suppress unconnected internal pads  NO
      Draw holes only                     NO

      APERTURES USED:
      ---------------------------------------------------------
      TYPE       SIZE/NAME                   ROT   MIRROR MODE
      ---------------------------------------------------------
      CIRCLE     0.00600                                  DARK
      CIRCLE     0.01800                                  DARK
      CIRCLE     0.02200                                  DARK
      CIRCLE     0.02800                                  DARK
      CIRCLE     0.05000                                  DARK
      CIRCLE     0.06500                                  DARK
      CIRCLE     0.07300                                  DARK
      CIRCLE     0.10000                                  DARK
      CIRCLE     0.40000                                  DARK
      SQUARE     0.05000                     0.000 NO     DARK
      SQUARE     0.07300                     0.000 NO     DARK

         LAYER7 created with warnings

Reply
  • TH Designs

    Typical detailed output for each layer

    ================================================================
         PROCESSING FILM < LAYER7 >
         TO FILE < C:/allegro/LAYER7.art > ...
    ================================================================

      FILM PARAMETERS :
      ---------------------------------------------------------
      Undefined line width                8.00
      Mirror code                         NONE
      Rotate angle                        NONE
      Offset x:                           0.00
      Offset y:                           0.00
      Plot negative                       NO
      Suppress unconnected internal pads  NO
      Draw holes only                     NO

      APERTURES USED:
      ---------------------------------------------------------
      TYPE       SIZE/NAME                   ROT   MIRROR MODE
      ---------------------------------------------------------
      CIRCLE     0.00600                                  DARK
      CIRCLE     0.01800                                  DARK
      CIRCLE     0.02200                                  DARK
      CIRCLE     0.02800                                  DARK
      CIRCLE     0.05000                                  DARK
      CIRCLE     0.06500                                  DARK
      CIRCLE     0.07300                                  DARK
      CIRCLE     0.10000                                  DARK
      CIRCLE     0.40000                                  DARK
      SQUARE     0.05000                     0.000 NO     DARK
      SQUARE     0.07300                     0.000 NO     DARK

         LAYER7 created with warnings

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.