Stats

  • Locked Locked
  • Replies 8
  • Subscribers 167
  • Views 19539
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Change the grid size while routing in Allegro with a hotkey, Keep routing at the same time

ScottCad

When routing a design more often than not I change the grid when routing.

I created a hotkey to do this and indeed the grid does change but when the hotkey executes I loose the cline segment I had picked.

here is the macro

funckey 1 "define grid;etchedit;setwindow form.grid;FORM grid non_etch non_etch_x_grids 100;FORM grid non_etch non_etch_y_grids 100;FORM grid all_etch all_etch_x_grids 100;FORM grid all_etch all_etch_y_grids 100;FORM grid done"

If I am routing in a trace I can go up to the tool bar and change the grid spacing for all the etch and click ok in that dialog. The grid spacing changes and I dont loose my picked trace so I can keep on routing with the new grid settings.

Does anyone know how to create a macro to do this. It would be a time saver...I just want to be able to change the grid in an easy way while routing at the same time ... lol :) without having to select a menu to do it.

Thanks Scott.

Parents
  • ScottCad

    Nayyier in Allegro I dont believe you can just find text. There are certain things that can be found using the find option. Those things are divided into particular items.

    They are. Net, Symbol or pin, Device Type, Symbol Type etc. If you click on find there is a pop down dialog that lists all the items you can look for.

    I had looked for a reference on all available commands in the past but couldnt find everything in one place. Perhaps someone might chime in if they know a good resource.

    Thanks Scott. 

Reply
  • ScottCad

    Nayyier in Allegro I dont believe you can just find text. There are certain things that can be found using the find option. Those things are divided into particular items.

    They are. Net, Symbol or pin, Device Type, Symbol Type etc. If you click on find there is a pop down dialog that lists all the items you can look for.

    I had looked for a reference on all available commands in the past but couldnt find everything in one place. Perhaps someone might chime in if they know a good resource.

    Thanks Scott. 

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.