Stats

  • Locked Locked
  • Replies 1
  • Subscribers 165
  • Views 14121
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Route Keep In

Yoda5939

This post specifically pertains to the subject but applies to all areas of keep outs. I need to add a route keep-in of 2.33mm to my board. What is the latest how-to for this procedure? I have turned on the appropriate layer but can't seem to draw the shape. I know its elementary but a refresher would be great. Thanks.

-Ron Scott 

Parents
  • steve

     Try an Edit - ZCopy, then set the Options menu to Route Keepin with a Contract Value of 2.33mm then left click your Board Outline. For Keepouts you can use the Expand. It works much like an Offset command

Reply
  • steve

     Try an Edit - ZCopy, then set the Options menu to Route Keepin with a Contract Value of 2.33mm then left click your Board Outline. For Keepouts you can use the Expand. It works much like an Offset command

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.