Stats

  • Locked Locked
  • Replies 4
  • Subscribers 164
  • Views 13750
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Thermals not updating

Lennie

 I have a dynamic positive plane on the top layer. When I go to global dynamic shape parameters and change the thermals from full contact to diagonal or orthogonal and click ok only the via get updated. How do I get the thru hole and smt thermals to update ?

Parents
  • steve

     OK try a Shape - Select Shape or Void then left click the shape then RMB - Parameters. Look at the same Thermal Relied Connects but this time this is for just this shape. If that doesn't help What are the Clearances set to DRC or Thermal/anti. If it's the latter try changing to DRCa dn see if that helps. You could also try a DBDoctor. Also make sure you are on the latest 16.6 hotfix (S024).

Reply
  • steve

     OK try a Shape - Select Shape or Void then left click the shape then RMB - Parameters. Look at the same Thermal Relied Connects but this time this is for just this shape. If that doesn't help What are the Clearances set to DRC or Thermal/anti. If it's the latter try changing to DRCa dn see if that helps. You could also try a DBDoctor. Also make sure you are on the latest 16.6 hotfix (S024).

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.