Stats

  • Locked Locked
  • Replies 8
  • Subscribers 165
  • Views 15084
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How can I make this Pspice model work?

Lennokoko

I need to create the Pspice model of the transistor BD139. I found the Pspice parameters on the web and introduced them whit model editor, uploaded the component in my library and then run simulation, didn't get any errors. The output characteristic is very odd, it isn't a smooth curve and it has pA-uA in place of mA-A .The electrical schematic is whit a tension divider in the base: Rb1 = 9K , Rb2 = 1K , Rc = 2k5 , Re= 1k3 . I apreciate any help. Thank you!

Parents
  • Lennokoko

    Sorry for not specifying. I don't have any errors, the output characteristic isn't good, as you can see in the photo. I have licensed installation, V16.5.

Reply
  • Lennokoko

    Sorry for not specifying. I don't have any errors, the output characteristic isn't good, as you can see in the photo. I have licensed installation, V16.5.

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.