Stats

  • Locked Locked
  • Replies 7
  • Subscribers 168
  • Views 21595
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Adding a pin to my PCB

Cmusgrove

I started a new job, where they are using Cadece/Allegra/Orcad 16.3.  I've laid my own boards out for 20 years and using several different programs but never Orcad.  I'm having some troubles figuring out how to do simple things in the PCB.  

I need to create a part, its a DC-DC converter AGF700-48S30LT.  I need 3 different hole sizes.  I've gone through the wizard and just normally but I can't seem to figure out how to add a pin.  It appears that pins have to have their own file/drawing, so I created some hole files (this seems insane to me but it seems to be how it works).  I created the pins through Tools>Padstack>Modify Design Padstack then right clicking on the pad and selecting edit.  This let me create pads.  

However when I create the pad if I keep the name the same it will modify all the pins rather than just one.  Through the wizard it created 2 pin types one for pin 1 and one for all the other pins.  But I need 3 pin types.  

I've tried adding a pin, by selecting Layout>Pins then I select click somewhere, and I get the message No padstack specified. 

Also I can't seem to change the pin numbers.  I've double clicked on yellow number text and right clicked and nothing.

I've searched for videos on how to create parts in orcad 16.3 and I haven't found one that does it from scratch.  Is there some resources out there?

Parents
  • Cmusgrove

    Thank you for the quick response.

    4a is where it doesn't work for me.  I click on Layout>Pins and the command area says that no padstack is selected.  I click around, with both the left and right click and nothing. 

    Also how do I change the pin number.  I double click on the text, pin,... and nothing.  I right click on it and still nothing that seems to let me change the pin number.

Reply
  • Cmusgrove

    Thank you for the quick response.

    4a is where it doesn't work for me.  I click on Layout>Pins and the command area says that no padstack is selected.  I click around, with both the left and right click and nothing. 

    Also how do I change the pin number.  I double click on the text, pin,... and nothing.  I right click on it and still nothing that seems to let me change the pin number.

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.