Stats

  • Locked Locked
  • Replies 1
  • Subscribers 165
  • Views 12843
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PCB Editor Dynamic Etch Shape Issue

RBATES15

I'm running into an odd problem. I have two pins on an SOIC-8 that are next to each other and tied to the same net. I'm trying to lay a dynamic shape over the two pins to connect them together along with some pins on some other parts close by. For some reason, no etch will form between the two pins when I cover them with the shape. What I can do is create a small shape between the two pins. That works until I try to merge the two shapes together. When I do that the shape between the pins disappears. It doesn't seem to be a constraint manager issue. Any suggestions?   

Parents
  • RBATES15
    Solved my own problem. I had "Create pin void" set as inline with a 50 mils placing. Reducing the spacing fixed the issue.
Reply
  • RBATES15
    Solved my own problem. I had "Create pin void" set as inline with a 50 mils placing. Reducing the spacing fixed the issue.
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.