Stats

  • Locked Locked
  • Replies 4
  • Subscribers 164
  • Views 14637
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Allegro incorrectly displays line width

Hieu Tran

I'm designing PCB in Allegro version 16.3. I set the line width as 20 mils for routing nets, however, the width of 20 mils lines display same as other (for example 4 mils line in the below image).

I copy my design to other laptop, it is ok, the 20 mils lines looks wider than 4 mils lines.

Could someone help me to address this problem?

Parents
  • riklee
    disable (uncheck) the variable to see the true line widths.
    I'd also review others you have enabled. For example, I doubt you need to have the variable old_style_flash_symbols or display_thintext enabled
Reply
  • riklee
    disable (uncheck) the variable to see the true line widths.
    I'd also review others you have enabled. For example, I doubt you need to have the variable old_style_flash_symbols or display_thintext enabled
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.