Stats

  • Locked Locked
  • Replies 4
  • Subscribers 167
  • Views 1588
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

The line width in the new version of Part Editor is not displayed correctly (17.2@HF049)

Kinzhifeng

For example, the line width I set in the Part Editor feels good, but when I update it to the schematic,

it becomes very thick, as shown in the picture below.

This problem is not found in the old version of the Part Editor, and the new version has always existed.

Parents
  • oldmouldy

    This seems to be working correctly for me. I guess that you have tried deleting and redrawing the line with the issue? If the problem persists, you will need to get the library data to Cadence for investigation, either directly through COS, or through your Cadence Channel Partner.

Reply
  • oldmouldy

    This seems to be working correctly for me. I guess that you have tried deleting and redrawing the line with the issue? If the problem persists, you will need to get the library data to Cadence for investigation, either directly through COS, or through your Cadence Channel Partner.

Children
  • Kinzhifeng
    in reply to oldmouldy

    Or let me describe it this way. The line width displayed in the part editor is not the same as that shown in the capture. The line width displayed in the part editor is much thinner than that shown in the capture.    （in 17.2 hotfix049）

Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.