Stats

  • Locked Locked
  • Replies 1
  • Subscribers 164
  • Views 12554
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

micro via technology

archive

Any have idea that how to control blind via constraints. as want partialoverlapping of blind/buried via of same net and keep it away from other by 4 mil. when i did that there were lot of DRCs.
Any body has any idea.


Originally posted in cdnusers.org by imaqsood
Parents
  • archive

    create a seperate rule for a net.

    give it a NST[net spacing type], create a spacing rule w/ a set minimum blind buried gap to 0, and update your table to follow the new rules.

    or turn off net spacing rule, if you need to overlap.

    best of luck,

    oscar miguelino


    Originally posted in cdnusers.org by oscar@oqo.com
Reply
  • archive

    create a seperate rule for a net.

    give it a NST[net spacing type], create a spacing rule w/ a set minimum blind buried gap to 0, and update your table to follow the new rules.

    or turn off net spacing rule, if you need to overlap.

    best of luck,

    oscar miguelino


    Originally posted in cdnusers.org by oscar@oqo.com
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.