Stats

  • Locked Locked
  • Replies 5
  • Subscribers 164
  • Views 15427
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Export IDF Format

archive

Hi folks, Have anyone tried to export the board file to IDF Format and successful? I have problem while exporting,i had defined height max & min for the respective components in the dra file,updated the symbols in the board file, and while i try i export it,it asks for default height,height was specified,And it generates with the default value rather than the actual value defined in the dra file.. We need the IDF File for our solid works software,which can import the file for our board Feasibility study with various assemblies,like front panel,back panel etc,for our prototype purpose am i missing some step along ?. Request someone to help me out in this issue.. Thanks & Best Regards, Ramesh


Originally posted in cdnusers.org by rame
Parents

  • Ramesh,

    As Randy had posted IDF export output height data according to the following precedence:

    1. From the component definition HEIGHT property. This can be ignored for all
    using the environment variable IDF_IGNORE_COMP_HEIGHT.

    2. From the symbol definition PACKAGE_HEIGHT_MAX property.

    3. From the default value set as an option to idf_out.exe or in the Export IDF
    UI.

    You should ensure that the symbols have the correct heights in the board file using Edit >Properties and select component placebound shape.


    Originally posted in cdnusers.org by Trykon
Reply

  • Ramesh,

    As Randy had posted IDF export output height data according to the following precedence:

    1. From the component definition HEIGHT property. This can be ignored for all
    using the environment variable IDF_IGNORE_COMP_HEIGHT.

    2. From the symbol definition PACKAGE_HEIGHT_MAX property.

    3. From the default value set as an option to idf_out.exe or in the Export IDF
    UI.

    You should ensure that the symbols have the correct heights in the board file using Edit >Properties and select component placebound shape.


    Originally posted in cdnusers.org by Trykon
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.